Red RC » Products

December 11, 2020

JConcepts titanium motor mounting screws

JConcepts have launched a precise new 3mm titanium motor mounting screw for a variety of applications. The screw has a large diameter head which eliminates the need for a washer and where a lot of detail of the design rests. The head of the screw is highly detailed titanium but with increased machining over the head of the screw. The design incorporates holes and notched hexes which make it incredibly light-weight but strong in all the important areas. Located in the centre is the 2.5mm hex used for adjustment and security.

View the mounting screws here

December 11, 2020

1up Racing DR10 vertical shock mounts & diff lockout

1up Racing have created two new items for the Team Associated DR10, vertical rear shock mounts and a hardened steel diff lockout. These parts are designed to help your DR10 launch from the line better than ever and stay straight as an arrow down the track. The shock mounts attach to the stock shock tower and offer a more vertical rear shock top mounting position, while the diff lockout replaces the gears in the rear diff turning it into a solid axle.

View more images here

December 11, 2020

Yokomo YD-2RX RWD Drift chassis

Yokomo have announced their new YD-2RX RWD Drift chassis based off their popular R series chassis. Maintaining its overwhelming acceleration with high rear traction thanks its rear mounted motor, the RX has a newly designed main chassis and upper deck and comes equipped with a load of optional parts as standard. The brace that supports the upper deck has been moved slightly forward and the mounting of the battery has been placed as close to the rear as possible. By moving the heavy objects to the rear, they have achieved the highest rear load model in the series. The YD-2Rx is available in three colours, black, red and purple, as a standard lineup.

View more images & details here

December 11, 2020

Muchmore alu turbo cooling fans for motor & ESC

Two new aluminium turbo cooling fans from Muchmore for the motor and ESC. The cooling fans are available in 30mm and 40mm version and both feature a machined aluminium outer shroud and both come supplied with a fan mount to easily attach the fan to your car’s chassis plate. The 30mm version comes with a standard ESC plug but also includes an extension cable with JR type connector to connect to your ESC while the 40mm version comes standard with a JR type plug.

Source: Muchmore [muchmoreracing.net]

December 11, 2020

Team Powers Mini-spec Radon ESC

From Team Powers comes their new smaller Mini-spec Radon speed control. Approximately 30% smaller than the standard Radon Series Speed control it is compatible with Radon series speed control firmware. Supporting Ch3/Ch4 Aux Input signal to control different item function values, this can be set directly from the LCD card. Comes supplied with 14AWG high density copper soft wire.

View more details here

December 11, 2020

Smokem Racing R12 roll centre shim sets

Smokem Racing introduce their new carbon fibre roll centre shim sets for the ARC R12. Available in 1.0mm and 1.5mm versions, the shims are used to raise the R12 suspension arm mounts, allowing roll centres to be raised in larger increments without stacking multiple shims. Raising the roll centre releases the car from excessive grip through a corner, allowing for improved flow and corner speed. Features a unique design that allows the same shim to be used under all 1-piece toe blocks.

View the full shim set here

December 11, 2020

RPM X-Maxx oversized front axle carriers

RPM have introduced these new oversized front axle carriers for the Traxxas X-Maxx. Replacing the stock part and bearings (20x27x4mm), they come with much larger 20x32x7mm inner bearings and the carrier sorts massive steering support ribs for the strongest possible carriers. The outer bearings remain the same as stock and are not included. Sold as a pair.

Source: RPM [rpmrcproducts.com]

December 11, 2020

Yeah Racing Mini-Z tool kit

From Yeah Racing, this tool set is perfect for those upgrading and/or rebuilding their Mini-Z. Supplied with all the required sizes of Phillips head (00, 0 & 1), nut drivers (3.5mm, 4mm, & 4.5mm) and a 1.5mm hex driver, they come in a handy carry case with elasticated loops. The tools themselves sport neat spiral knurled black anodised aluminium handles while the specially treated tool steel tips offer exceptional life.

View the carry case here