F.V.S.S. have introduced some new products including this LiFe RX battery and carbon pattern balances weights. The LiFe receiver pack is 2 cell 6.6 volt 1450mAh and will fit into 1/10 and 1/8 racing cars and has the same dimensions (83 x 26 x 16 mm) as conventional packs. The balance Weights feature a cool carbon pattern and are backed with strips of adhesive for easy mounting. Sold in 12 pieces of 5grams.
O.S. Engines have released this limited edition .21VZ-B V-Spec engine that will mark this succesful engine’s final production run with a total run of 300 pieces. The V-Spec LE will utilize the specially modified cooling head from the Speed II World Championship engine, that has been anodized in a very stunning gold and which will feature sixteen machined holes for lighter weight and more efficient cooling. To top it all off, the head will feature custom graphics to signify all four IFMAR World Championships and each engine will be individually numbered. This special run will only be available from U.S. based dealers.
Click here to see the feature list
Tamiya have introduced two new versions of optional blank pistons. One version of piston features 6 dimples allowing you to freely select the number and diameter of the holes and they work with a wide range of shocks. The second, are TRF Aeration damper pistons which features 8 dimples again allowing you to select the number and diameter of the holes and can be used with the buggy aeration oil filled damper set.
Source: Tamiya [tamiya.com]
With everything you need included in the box, the 1/18-scale Ready-to-Run Mini Highroller is ready to go when you are. You can run it wherever you want, on or off road, in all its scale-detail glory. Whether pushing the limits of technology or taking on rugged terrain, this is one lifted truck that knows no boundaries. The vehicle comes fully assembled with all of the electronics installed, and includes the vehicle battery and charger as well as batteries for the included transmitter.
Click here for the full feature list
Shepherd have announced the release of the Velox V8 2010. The makor change is that the 2009 pulley set will replace the standard pulleys in the kit. Due to the improved teeth design the pulleys reduced the drag significantly, while small holes in the washers release the dirt and keep the pulleys clean for a long time. The small 16T pulley was replaced by an 18T pulley and the 24T pulley on the one-way axle was replaced by a 27T pulley. This results in less friction and a much longer lifetime for the new front belt. The new lightweight design of the pulleys guarentees an extremly good true running and reduces virbations to a minimum.
Source: Shepherd [team-shepherd.com]
Losi have released this extra high torque servo. An ideal step up for RTR and 1/8 throttle servos this servo provides over 130 in./oz. of torque reliably through ball bearing supported metal gears. This servo is perfect for 1/10 steering, 1/8 throttle, and 1/8 Monster trucks that will benefit from the extra torque and power. The metal output shaft features 23 splines, which is the same as Losi, JR, Spektrum, and Airtronics.
Source: Losi [losi.com]
Serpent have released two new parts for the Serpent 733 and Serpent 966. The first, an aluminium front one-way axle with high quality one-way bearings that has been precision machined out of a single piece of aluminium with integrated pulley-flange. It can also be locked, when needed, by using 2 steel pins that slide through holes in the steel adaptors and are kept in place by 2 o-rings. Simple and effective, the set includes axle with one-ways, 2 steel adapters, 2 pins and 2 O-rings. The set uses the same pulley as that on the front differential but isn’t included. Secondly Serpent have released a lightweight steel brake disk for both the 733 and 966. Weighing only 11 grams it offers very smooth and even breaking, also under changing weather conditions & temperatures and through long finals.
Click here for more images of the products
Xceed have released their new wind breaker jacket, which is great for at the track when there is a chill in the air. The black jacket is made of a smooth nylon with comfortable net-type inner lining and will keep wind out and for a while the rain too. There is a hood in the neck lining and the bottom features an elastic drawcord, with elastic cuffs on the arms. The jacket sports a medium size Xceed logo on the front and a large one on the rear and is available in S, M, L, XL, XXL, XXXL.
Source: Xceed [xceedrc.com]
