Red RC » Products

September 2, 2009

KM Racing Flywheel remover & Exhaust spray

KM Racing have released 2 new handy products for gas racers. First up is this handy red anodised flywheel removal tool, that like other versions on the market allows for the safe and easy removal of the flywheel from the engines crankshaft. The other new product from KM is this pipe protector spray that you use to coat your exhaust system and which helps prevent the build up dirt on the pipe to make for easy cleaning.

Click here to see the exhaust spray

September 1, 2009

ABEC35 Engine & Thrust bearings

Ball bearing company ABEC35 have released version 2 of their 7x19x6mm engine bearing. This new type features redefined radial play and inner diameter and each bearing comes with 2 contact rubber shields (1 black & 1 blue) and is greased. Suitable for off road conditions and if using them in on road simply take the blue shield away. Another new product is their thrust bearings (F5-10M 4.8/5.0) for Kyosho push type clutches. Comparing to the previous clutch bearings (F5-10M 5.0/5.2) they have over size balls, 9pcs x 2.0mm, for extended life.

Source: ABEC35 [abec35.com]

September 1, 2009

X-Factory X-6 Squared Plastic Flex chassis

X-Factory have announced the release of this new ‘plastic’ chassis for the National Champion X-6 Squared buggy. The first ones were ready just two weeks ago and were rushed to the Team for testing and Tom Cockerill used one to take a convincing win at the Blythe UK National. The new chassis is made of the same material as the original ‘graphite’ version, except that the carton fibres are replaced by fiberglass giving it a bit more flex. X-6 Squared kits will continue to be supplied with a graphite chassis, and the plastic ones will be available as an option.

Click here for another image of the chassis

August 31, 2009

RB Shark 9 LE engine

To celebrate Renaud Savoya’s European title, RB have release this limited edition Shark 9 engine. This high performance engine has 3 ports with the multi exhaust system delivering an excellent power/fuel consumption rate. Featuring a 14mm long stroke balanced crankshaft with coated pin it is supplied with a turbo glow plug and combustion chamber as well as a 9mm carburetor provided with 6mm, 7mm and 8mm restrictors. This engine will also be delivered with complete in-line kit RB 2045P and compact manifold and as an extra gift comes with the RB Gas cooler. This special edition is limited to 400 units for the worldwide market and will be numbered and signed by Renaud himself.

Source: RB Products [rbproducts.com]

August 30, 2009

Pirani Motor Sport MRX-4 options

F.V.S.S. Racing Team have released this Pirani Motor Sport kit for the Mugen MRX-4. Developed and tested by Andrea Pirani it is composed of superior front upper support brackets and rear wishbone support brackets. This kit claims to provide better steering and greater traction and is available in front or rear parts and for the best performance, as a complete set.

Source: FVSS [fvssshop.it]

August 29, 2009

VP Pro Xray XB808 Air filter foam

VP Pro have released two new air filter foams for the Xray XB808 in both 2008 and 2009 versions. Made from high quality dense foam and shaped for ultimate high flow, they come with one outer and one inner foam element. Micro density foam helps achieve high performance while providing maximum air filtration for extended engine life even in dirty and dusty conditions. Sold in packs of 10 for the 2008 version and 15 for the 2009 version.

Source: VP Pro [vp-racing.com]

August 29, 2009

Intellect 5000 & 5400mAh LiPo packs

Team Epic are promoting this two new LiPo battery packs from Intellect. The first is a hard case 1 cell pack for serious 1/12th scale on-road, 1/12th and 1/10th scale oval racing and World GT and is 3.7 volts, 5000mAh, 40C and comes pre-wired with a Deans plug. The second pack from Intellect is perfect for 1/8th scale off-road buggy and is 14.8 volts, 5400mAh and 35C rated. Both packs are approved and legal for ROAR racing.

Click here to see the other pack

August 28, 2009

Robitronic Large Transport bag

Manufactured from a combination of high quality materials, Robitronic’s new 1/8 bag becomes the perfect storage for an 1/8th scale buggy, truggy or even an onroader together with accessories like tyres, tools, setup-gauges and a starter box. A telescopic handle and 2 ball raced wheels allow for easy transport, while handles and straps allow for easy handling of the bag, especially when its stored in the trunk of your car. The transport bag’s five drawers are made from corrugated plastic and its coating is especially easy to clean. The outside features handy pockets for manuals, setup-tools, accessories and many other things you’ll want to have quick access to. At the top, there are 20 elastic straps to securely hold your tools and put your screwdrivers and socket wrenches straight. Behind this tool-tray, there’s another generous storage area (500x55x90mm) for additional items.

Click here for more images of the bag