July 31, 2009

SpeedWorld SJ-R black pre-mounts

SpeedWorld SJ-R black pre-mounts

SpeedWorld / Sorex USA have been in touch to tell us about their new SJ-R black pre-mounted tires/wheel. Working closely with JACO, they have produced a black version of the company’s popular Prism wheel which will be available in 24, 28, 32 and 36R versions. Another new produc is the set of 12 rubber tire holders, each holding a full set of rubber tires, and which comes supplied in a handy carrying case that holds them all in one place.

Click here to see the tire holders


July 31, 2009

East Coast Bodies P908

East Coast Bodies P908

East Coast Bodies have released this radical looking new 1/8th scale on road shell. This new P908 body is apparently the result of 2 years of design and testing to improve and enhance every detail and claims to improve the overall performance of the car. East Coast have also developed 3 type of new 1/8 on road rear wing in order to provide more optional rear grip, high speed and something in between.

Source: East Coast Bodies [eastcoastbt.com]


July 31, 2009

Exclusive – Protoform AMR-12 body shell

Exclusive - Protoform AMR-12 body shell

On Oct 1st 2009 there will be new EFRA/BRCA body rules that will come into effect, so a ‘clean sheet’ type design was required by Protoform in an effort to fully comply. The AMR-12 had been exhaustively tested in preparation for these rule changes and the body has actually shown an increase in performance over the ‘old format’ type race bodies. It’s made to fit all the popular 1/12th chassis with design considerations built in to accommodate the larger brushless motors and lead wires. This semi-realistic body is pulled in .020 lexan and has a protective film on it. Ready to ship at this time, it’s just in time to start practicing for the IIC Race in Vegas and the US Indoor Champs in Cleveland.

Click here for more photos


July 30, 2009

Picco P-Zero 1/8th clutch set

Picco P-Zero 1/8th clutch set

Italian company Picco Micromotori have released their P-Zero 1/8th scale on road clutch set. Supplied with 2 springs, a hard and super hard version, both are made with a special material that does not lose tension even after long use, which helps keep the clutch consistent for the length of a race avoiding any loss of torque. The set includes the flywheel, lightweight flyweights, shoe plate and shoe, but does not come with the bearings or the clutch bell.

Source: Picco [teampicco.com]


July 30, 2009

Losi Buggy tires now available in Green

Losi Buggy tires now available in Green

Losi have announced that their lineup of 1/8th buggy tures are now available in Green compound. This new compound is the softest available from Losi and provides provides increased traction and consistency. Very comparable with some of the top-tire compounds available, it should be used when maximum grip is required. Green works best in cool/damp conditions, but is versatile enough to work well in dusty conditions too. The specially designed inserts are lightweight, provide a consistent firmness and have a better balance.

Source: Losi [losi.com]


July 30, 2009

Titanium Racing Xray F1 Stealth CVD

Titanium Racing Xray F1 Stealth CVD

Following on from the success of the F1 stealth CVD for the Mi4, with a victory at the hands of Chris Grainger at the BRCA Cotswolds National, Titanium racing are releasing the new CVD for all the current range of RC cars, beginning with the Xray T2 range. Manufactured to the highest standards using the latest technologies the new CVD features  a unique stainless steel Locking coupling, reduced stress points, oversized joint for increased smoothness and high tolerances for better fit, reducing play.

Source: Titanium Racing [titaniumracing.com]


July 29, 2009

Xray XB808 Adjustable Alu turnbuckles

Xray XB808 Adjustable Alu turnbuckles

New for the XB808, Xray have released 2 different versions of adjustable left & right M5 steering turnbuckles. Manufactured from strong, lightweight 7075 T6 aluminium, they sport precision threading for fine toe adjustment. Available in 58mm and 64mm, they are for serious racers who are conscious of weight savings, in this case 50% lighter.

Source: Xray [teamxray.com]


July 29, 2009

AKA Slash 1/8th Wheel adaptors

AKA Slash 1/8th Wheel adaptors

For those looking for better handling from their Slash, AKA have announced the release of their 1:8 wheel adapters for the Traxxas Slash truck that allow you to mount regular buggy wheels to your truck. Made from 7075 aluminum and hard anodized, they are supplied with all the necessary fasteners to mount them and include AKA “SureGrip” 17mm nuts to keep the wheels securely on the hubs. The wheel nuts are made from 7075 aluminium and also feature hard anodizing plus a knurled rear face to grab the plastic of the wheel and stay put. The adapters install in just minutes and require zero modifications to the truck and the stock width and steering radius are kept in tact. Adapters will ship starting the week of August 10th.

Source: AKA [raceaka.com]