Red RC » Products

October 11, 2020

KWR Engineering Tool Stand

The KWR Tool Stand is a great pit companion for the racer who enjoys a clean pit area. Designed to store everything you could possibly need including drivers, setup tools, setup station, and a pen and knife. Weighing in at approximately 100grams it can accommodate 5 hex or socket drivers, your setup station (Hudy or Arrowmax), droop blocks, pen, knife and other setup station accessories. There is also a generous storage area for screws and other parts which you don’t want to lose. The tool stand is 3D printed in high quality PLA plastic and is very light weight and strong which makes it great for travelling.

View another image of the tool stand here

October 10, 2020

Motiv MC4 brushless motors

New from Motiv is their all new MC4 line of 540 class brushless motors (ROAR, EFRA Compliant). The MC4 spec winds will be produced in 10.5, 13.5, 17.5, 21.5 and 25.5 variations and all are wound on a newly tooled Motiv stator for low resistance. As always all motors come standard with a quality-control spec sheet and shows that each part has gone through QC in-house and that the rotor, sensor and stator meet previously selected specifications for every single motor sold. The MC4 modified lineup is available in eleven different variations making up all even and odd winds from 3.5T all the way up to 8.5T.

Source: Motiv [motivrc.com]

October 9, 2020

Maclan Racing SSI Simple Soldering Iron

New from Maclan Racing, the SSI series soldering iron is lightweight, compact and designed for high heat performance with superb safety features. This soldering iron will operate from 12V to 24V DC power with a 6S Li-Po battery recommended for the best performance as the iron will heat to 450°C (840°F) in just about 10 seconds. The built-in safety features will automatically cool the iron to 400°F if it’s not moved for 3 mins and will completely shut off power and go into standby mode after 6 mins of idle time. The OLED screen displays iron status and adjustment information and all parameters can be easily and quickly adjusted by the buttons on the handle.

Source: Maclan Racing [maclan-racing.com]

October 9, 2020

Infinity IF18 long aluminium brake lever

New for the Infinity IF18, Creation Model have introduced this long aluminium brake lever. Precision machined from 7075 aluminium, compared with the standard plastic brake lever in the kit it flexes less and features two additional mounting positions allowing for more adjustable braking force and excellent control.

Source: Creation Model [creationmodel.net]

October 9, 2020

Racing Performer DX1 Type R titanium shaft motor

Yokomo have also introduced the newest version of their Racing Performer DX-1 Type-R, which is their best-selling motor for drift users. This spec features a lightweight and high quality titanium rotor shaft to further enhance the performance of the Type-R. A lighter rotor makes the throttle very smooth, while the optimised magnetic force improves high speed performance while working well with the boost and turbo functions of the speed controller. Compared to steel shafts, it is more resistant to overheating which can maximise efficiency even when running for long periods of time. In addition, by smoothing the descent of rotation when letting off the throttle, you get the feeling of rolling in the corner, which enhances control during cornering.

Source: Yokomo [teamyokomo.com]

October 9, 2020

Yokomo YD-2 slide rack, ESC mount, fans & brass mounts

Yokomo have released a ton of new option parts for their extremely popular YD-2 drift chassis, starting with this upgraded slide rack set. The now single piece aluminium bulkhead that supports the entire slide rack ensures more accurate setup than with the original parts. In addition, changing the bridge at the rear end of the front bulkhead to the upper deck adapter, it enhances the flex at the front of the chassis. This set is compatible with both E series and S series, and the graphite upper deck compatible with slide racks will be required when using it for the E series.

View more details & images here

October 9, 2020

RC Maker GeoCarbon setup board

RC Maker have introduced what they claim is the most premium solid carbon fibre setup board on the market and we might have to agree. Finished in their signature GeoCarbon style, it features recessed corners with chamfered edges for ultimate looks and practicality. The chamfer prevents the corners from chipping and ensures your board will last for years to come. Manufactured from 5mm thick 3K twill weave gloss carbon, ensuring it stays flat and tweak free, it comfortably fits 1/10th Touring and 1/12th Pan cars with dimensions, coming in at 395 x 295mm (15.5 x 11.6 inches). The board comes with a RC Maker branded neoprene protective bag for travelling and storage when not in use. The board (850g) and travel bag (250g) weigh in at a nice and light 1.1kg (2.4lb) and for those that want to go the whole hog, they also offer a custom name engraving service.

View more images here

October 9, 2020

SWorkz aluminium wing plate

Made by RC-Project for SWorkz is this aluminium wing plate. Machined from 7075 T6 aluminium with a thickness of 3mm it has been anodised and laser etched with the SWorkz logo. A very lightweight option part that will help to support the wing in case of violent impacts, avoiding unpleasant deformations or having the wing ripped from the mounts. Thanks to the mounting hole slots it can be mounted on all 1/8 buggy models using the included 2 washers.

Source: MW RC Cars [mwrccars.at]