August 1, 2008

Shepherd Euro 2008 Conversion Set

Shepherd Euro 2008 Conversion Set

Seen in our coverage from last weeks European 1/8th scale Championships in Valencia, Shepherd have now officially released their Euro 2008 Conversion Set. Containing new parts for rear end of the Velox, the distance between the lower hinge pins is smaller to increase the effective length of the lower wishbones. With this modification the Velox becomes more stable on the rear end and therefore is easier to drive. To have the same angle for the shock absorbers two carbon fibre plates are included that can be fixed at the lower wishbones.

Click here to see the set mounted… content


July 31, 2008

Euros 1:10 – New in the pits

Corally RDX Phi prototype parts

A quick look through the pits here in Vila Real have revealed a number of new products being run and tested by some of the top drivers. Corally racer Marc Fisher from Germany is running some new prototype parts on his RDX Phi. There are new rear uprights that have 1mm lower top mounting points, also the front steering blocks have received some attention together with the new servo saver part that has simpler to adjust Ackermann.

Check out the full coverage on our event site here.


July 31, 2008

Losi Bearing & Clutch service boxes

Losi Bearing & Clutch service boxes

New from Losi for use with their 8ight range of chassis’ are two new spares boxes. The first box contains a complete ball bearing set for all 8ight-based race and RTR models and comes in a reusable box. This boxed set includes all of the necessary bearings you need, and is a cost-effective alternative to purchasing individual bearings. Losi have also released a clutch rebuild and service set, which includes all the service and tuning parts necessary for rebuilding the 8ight and 8ight-T clutch in one box.

Click more to see the clutch rebuild box… content


July 31, 2008

Xray XB808 CVD drive axles

Xray XB808 CVD drive axles

New from Xray for the XB808 are these CNC-machined CVD drive axles, which have been made from premium lightweight Swiss 7075 T6 hardcoated aluminium. Strategically-machined, super-lightweight drive axles are specially designed and produced for high-competition racing. The reduced weight is almost 3x less than the stock wheel axle, with a total weight saving of up to 20g for all 4 wheel axles. Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hard coating is done at Xray’s own in-house fully-robotic hard coating line, ensuring a perfect hardcoated surface every time.

Source: Xray [teamxray.com]


July 31, 2008

VP-Pro Receiver battery packs

VP-Pro Receiver battery packs

VP-Pro have released a pair of receiver packs for gas gars, available in both stick and hump pack configurations. Made using 2/3A 1500mAh NiMh cells, the packs are developed in collaboration with EP and feature hi quality soldering tags to ensure increased voltage output together with lower internal resistance.

Source: VP-Pro [vp-racing.com]


July 31, 2008

Edit high output Glow igniter

Edit high output Glow igniter

Edit RC have released this new high output Glow igniter. Featuring a 3000mAh 1.2v Cell, this provides long lasting power for while you’re out bashing or thrashing your car or truck. Supplied with an overnight charger to fully charge your igniter while you sleep, it is suitable for all vehicles with Nitro powered engines.

Source: Edit [rcedit.com]


July 31, 2008

Novarossi Exhaust Gas Cooler

Novarossi Exhaust Gas Cooler

As seen for the first time here on Red RC, Novarossi have announced that they are released their Exhaust Gas Cooler. Mounted between the tuned pipe and the fuel tank, it will take away some heat from the exhaust gas that goes into the fueltank, lowering the temprature of the fuel and increasing the runtime. Available in late August, the cooler will be sold in anodised purple.

Click here to see another picture… content


July 31, 2008

Upgrade RC Vertigo design

Upgrade RC Vertigo design

Upgrade RC have announced the release of a new design in their range with the introduction of the Vertigo. Available for a full range of products, from starter boxes to chargers, the new design can be customized with your sponsors logos and is available in a number of different colours.

Source: Upgrade RC [upgrade-rc.com]