Red RC » Products

October 16, 2007

Axial Racing socket drivers

Axial Racing have release a new set of socket drivers to add to this current range of race tools. Fitting in line with their other tools, they have been designed to be easy to use ergonomically designed handles to fit in your hand better and provide grip even when your hands are slick from oil and grease. The socket driver tips are sold in a number of sizes with the metric set including a 4.5mm, 5.0mm, 5.5mm, 6.0mm, and 7.0mm while the Imperial set has a 3/16”, 1/4”, 5/16”, 11/32” and 3/8” drivers.

Source: Axial Racing [axialracing.com]

October 16, 2007

Venom 5-8 cell Multi-Charger

The Venom 5-8 cell Multi Charger is an all purpose charger designed to charge 5-8 cell NiCD and NiMH battery packs. With two different charge settings, 1.8 Amps for larger capacity cells/packs or 0.9 Amps for smaller capacity cells like those found in receiver and micro packs, the VMC is perfect for charging a wide variety of battery packs. Designend with simplicity in mind, just select the proper charge rate and plug in the battery. When the battery is finished charging, the LED on the charger will change from red to green.

Source: Venom Group [venom-group.com]

October 16, 2007

KM Racing NT1 anti-roll bars

KM Racing continue to release parts for the Xray NT1 with the introduction of a complete set of rear anti-roll bars for the car. Available in a number of different thicknesses to help set-up your car, they come in 1.7mm, 1.8mm, 1.9mm, 2.1mm, 2.2mm & 2.3mm and are a direct replacement for the original parts.

Click here to see the part mounted… content

October 13, 2007

Hot Bodies Lightning 10 Sport

Hot Bodies has introduced the RTR Lightning 10 Sport a 4WD nitro-powered buggy that is perfect for anyone looking for hours of fun and excitement. With nearly all of the details of the top-level Lightning kits, the RTR Lightning 10 Sport is a great stepping stone to the all-out 1/8 rallycross buggy class, making it ideal for young racers and beginners. It comes pre-assembled and only requires just a few minutes of preparation out of the box, the Lightning 10 Sport features a powerful 2.5cm3 (.15in3) size engine with pullstarter and tuned pipe, strong dual disc brake system, laydown steering servo, sealed receiver box, long-stroke oil-filled coilover shocks, front and rear chassis braces, turnbuckles for adjusting camber and front toe, and plastic chassis side guards.

Click here for more images… content

October 12, 2007

Tamiya TRF416 launched

Tamiya have released details about their new 190mm EP Touring car, the TRF416 which we showed you pre production images of previously. Designed for use with control tires and brushless motors, the car is optimised for this configuration and to be easy on the tires. The width of the bulkheads have been adjusted to optimise the roll qualities in the front and rear of the car while the motor was repositioned to help raise traction. The carbon fiber upper deck is now also thicker, up to 2.25mm thick from 2mm, for different cornering characteristics.

Click here for more pictures… content

October 11, 2007

Team Losi RC Diaper

More new products from Team Losi with the release of this RC Diaper/Carrier for the racer who likes to keep things clean. The “Diaper” features a rubberized leak proof pouch with an elastic edge that secures itself high around your 1/8 buggy, 1/10 scale truck or sedan, while the natural bag structure that encompasses the model collects and retains any debris or mess that falls off keeping it from messing your car, carpet, or house. Best of all there are sturdy carrying straps attached with a Velcro closure that allows you to carry your model effortlessly while keeping it level, allowing you to carry additional items at the same times without the risk of making a mess accidentally.

Source: Horizon Hobby [horizonhobby.com]

October 11, 2007

Team Losi range of Bags

Team Losi have released a number of new bags for racers of their products including a back pack, duffle bag and a hauler bag. The back pack has been purpose designed and built to use it for mini cars, transmitter, and tires or just about anything that you want to keep secure and easily accessible. The duffle bag is a large utility bag for all your RC equipment such as cars, tires, parts boxes, or about anything you need to haul will fit comfortably into this quality constructed duffle. And finally there is the new Pit Roller bag whose design allows you to categorize and store your RC gear in one of the heavy duty internal boxes for easy transport to and from the track and once there, the bag can either sit on its back rails allowing easy access to all of the internal storage boxes. There are ball bearing equipped wheels to make long hauls easy and security straps that double as handles for loading and unloading into you car.

Click here to see the other bags… content

October 11, 2007

Team Losi Large Pit Mat

Team Losi have released this new Pit Mat which they say offers unequalled protection for your table top or pit bench while working on your electric or nitro vehicles. The rugged leak resistant nylon material can be easily wiped off and cleaned with normal cleaners. The exclusive non-slip backing helps prevent the Pit Mat from sliding on the table top and the large size allows you to keep your tool box and spare parts safe from dirt and damage.

Source: Horizon Hobby [horizonhobby.com]