Red RC » Products

September 24, 2007

All Mod Support Spacers & Clutch plate

German after market parts maker All Mod have released 2 new products to their range of general and Mugen parts. First up are these engine support spacers for 1/8th scale buggies that when mounted lift your .21 motor by 1mm and this allows you to run the All Mod MSS 28 heavy-load clutch normally meant for use on .28 motors. Also new from All Mod is an aluminium clutch plate for use with the Mugen MTX and MRX range of cars that aids the engagement of the clutch for better power delivery.

Click here to see the clutch plate… content

September 24, 2007

JConcepts Illuzion Hi-Flow B4 Body

JConcepts have released the first of the new Illuzion bodies for their Fall lineup with the body which made its debut at the IFMAR Worlds in Japan, finishing 2nd and 3rd. The B4 Illuzion was designed for the Team Associated B4 stealth buggy and comes complete with window mask and 2 6″ V-wings. The lluzion Hi-Flow body features hard edge side pod styling with runners on the sides designed to move the air more efficiently to the wing while the roof of the body having been dramatically wedged and Illuzionized for that aggressive look.

Click here for more pictures… content

September 23, 2007

Atomic Carbon Kevlar chassis

The picture above and below is that of a new kevlar / carbon fibre tub chassis for the Atomic Carbon S4 which UK driver Mat Dodd is currently testing. The chassis has a outer layer of kevlar and the normal inner layers of carbon fibre with the purpose of the kevlar to help reduce any wear to a minimum on the chassis. Depending on how testing goes it might be introduced on the company’s S2 and S4.

Click here to see another picture… content

September 23, 2007

Team Losi Shock Oil 6 pack

Team Losi have released some of the most popular shock oils in the Losi range all together in one convenient package. The package is sold together with 6 bottles that include 17.5, 22.5, 27.5, 32.5, 37.5 and 42.5 hardness silicone oil, with the 42.5 a new addition to the range of shock oils.

Source: Team Losi [teamlosi.com]

September 23, 2007

Speed Merchant Rev5 1/12th scale

Current US National Champions Speed Merchant have announced the release of their latest 1/12th scale chassis, the Rev5, due for sale in the 2nd week of October. The car has a new rear pod design, that takes “easy access” to a new level, meaning you can literally drop in any motor, including brushless with a large pinion attached, with ease while the new pod plates have been machined from Delrin which offers huge weight savings. The car also feaures a new extensively tested “Formula” front end which has been created using linkages yet is sturdy enough to hold up to the speeds and forces generated in today’s cars. By supporting the top of the king pin with 2 balls, the upper link arm is very stiff and strong, and doesn’t move during a crash.

Click here to see more pictures… content

September 23, 2007

Ultimate Racing Flywheel tool

Spanish aftermarket parts maker Ultimate Racing have released this blue anodised flywheel tool. Featuring a laser etched Ultimate Racing logo, the tool helps you easily remove your cars flywheel by pulling it away from the crankshaft just by twisting the handle.

Source: SMP [smpracing.com] via Buggy Sport [buggy-sport.info]

September 22, 2007

Venom 4000mAh & 5400mAh LiPo’s

Venom 4000mah & 5400mah LiPo’s

The Venom Group have announced that they will soon release their all new 11.1v LiPO battery packs. Designed to compliment today‘s high demand needs for more power and capacity, these packs offer 30% or more average runtime, and are 33% lighter, than the comparable NiMH pack. Sold in 2 versions, 4000mAh and an amazing 5400mAh, both come supplied with 12-gauge silicone wire and the new Traxxas high current connector and both include a “JSTX42.5 3P” balance connector.

Click here to see the other pack… content

September 22, 2007

CEFX C12 BL 1/12th scale chassis

According to a statement by Josh Cyrul, top racer and designer of CEFX cars and parts, the company will stop trying to make their C12 1/12th scale chassis suitable for both brushed and brushless configurations as the changes needed to make the BL car competitive would compromise the cars setup in non BL configuration too much. Hence the C12 will stay as is and the company will further develop a specific BL version, the first picture of which is shown above.

Click here for the full statement… content