Red RC » Products

August 7, 2020

KO Propo EX-2 ST2 radio system

KO Propo have introduced their new EX-2 ST2 club-level radio system. The transmitter utilises the Extension Unit 2 steering wheel as well as upgraded angle sensors for the steering wheel and throttle lever that not only are about 100-times as durable as the standard potentiometers, they also offer a more linear output for greatly improved steering, throttle and brake feeling in both electric and nitro classes. The steering unit also offers dual ball bearings for the steering wheel shaft which optimises feeling and durability while a soft steering wheel return spring ensures a linear steering wheel feeling from the neutral point all the way up to the maximum operation angle. The ST2 transmitter is rounded out by the new V2.12 firmware as it is used with the high-end EX-RR transmitter. The radio system includes the compact size KR-241FH 4-channel receiver and it will hit stores at the end of August.

Source: KO Propo [kopropo.co.jp]

August 7, 2020

Phat Bodies V Rally 1/10th rally body shell

UK company Phat Bodies have introduced their new V Rally body shell for 1/10th scale rally and rallycross cars. Sporting large wheel arches the body supports 195mm wide chassis and it can be used with “dirt” high ground clearance or “tarmac” low ground clearance chassis setting, making it very versatile. The body is molded from high-quality polycarbonate, it comes in lightweight 0.75mm or more durable club racer 1.0mm thickness and includes a roof scoop, 2-piece rear wing, vinyl window masks and high-quality light, grille and vent stickers.

View more images here

August 7, 2020

Rusti Design XX4 shorty LiPo brace kit

Available from French brand Rusti Design is a LiPo brace kit for the vintage Team Losi XX4 buggy. The 3-D-printed braces were designed for the use with the TLR231092 22X-4 battery mount set of which the rubber strap and hook parts are needed as donor parts. Fitting the braces requires some DIY in the form of the drilling of four mounting holes, however Rusti Design supply a drilling jig with the brace kit. Using the braces will allow for a more professionally looking battery mounting and it required additional hardware in the form of 4-40×3/8” flat head and M3x10mm flat head screws.

View more images here

August 7, 2020

T-Works 1/8 off-road carbon fibre wing buttons

T-Works have introduced their new carbon fibre wing buttons for the most popular 1/8 scale off-road kits. The 1-piece wing button is machined from high-quality carbon fibre and it is available in six different specifications to cover Kyosho and Mugen, Team Associated, HB Racing, Agama, Tekno RC, and SWorkz kits. Using them will make for easier wing mounting, improved looks and better wing support, especially when running lightweight polycarbonate wings. The buttons come including gold-coloured mounting hardware.

View the other variants here

August 7, 2020

Muchmore lightweight Factory Team setup boards

Coming from Muchmore are their new lightweight Factory Team setup boards for 1/10th and 1/8th scale vehicles. Offering a sandwich hardwood core and plastic cover construction the boards are lightweight and thin while being easy to clean. A replaceable hard plastic sticker ensures the boards can be refurbished easily. The smaller board for 1/12th and 1/10th scale vehicles measures 420x320x12mm and weighs in at 105g while the larger 1/8th scale board measures 500x400x12mm at a weight of 150g.

View the 1/8th scale setup board here

August 7, 2020

LCG Racing BD10 SFX conversion kit

Following a first teaser image, LCG Racing have fully unveiled their SFX Symmetrical Flex conversion kit for the Yokomo BD10. After months of development and testing, the SFX conversion has already proven its capabilities in the hands of Nicholas Lee. The lightweight 7075 motor mount is designed with durability in mind and it works together with the symmetrical 2-pieces top deck. The design allows the use of the same top decks for both front and rear and it greatly increases the flex options as well as the ease of use. The rigid motor mount, which includes mounting positions for the battery stoppers, minimises longitudinal flex and makes the car more direct at corner entry and exit while increasing corner speed. By having a symmetrical flex design the car is more consistent and easier to drive, while the increased options help to adjust and fine-tune the car‘s setup to almost any track conditions and driving style. The SFX conversion also provides easier swapping of the top decks and better access to the drivetrain. The motor mount design allows the use of large pinion gears for stock racing but also works with large main gears needed for modified classes. Included in the set, that is available from now on, comes the new design motor mount, narrow top decks, top deck screws and 1mm aluminum washers.

View the converted chassis here

August 6, 2020

Xtreme Aerodynamics tool set & zipped bag

Xtreme Aerodynamics have introduced their new tool set that comes in a handy zipped bag for convenient storage and transport. The set includes 1.5mm, 2.0mm, 2.5mm, 3.0mm and 5.0mm hex head as well as 2.0mm and 2.5mm ball hex head wrenches, making the set ideal for virtually all scales and classes with the clutch adjustment tool and a slotted screwdriver especially targeting nitro drivers. The zipped bag comes in Xtreme Aerodynamics’ signature yellow and black colour and with a pre-cut inner foam for secure carrying of the precious tools.

Source: Xtreme Aerodynamics [xtremeaerodynamics.it]

August 6, 2020

Ruddog RC215 500W dual channel LiPo DC charger

The Ruddog RC215 500W Dual Channel LiPo Battery DC Charger is a compact and powerful device that allows to charge up to two battery packs simultaneously with up to 15A of charge current. When used in the combined ASYNC mode, a maximum of 25A of charge current is possible. The DC charger can be used with 1S to 6S LiHV/LiPo, 1 to 16 cell NiMH or 1S to 10S batteries and it works with 7VDC to 28VDC input. A powerful discharge function allows for up to 3A of discharge current or 15A when used in the Recycle mode. A 320×240 pixel 2.4 inch LC display allows to monitor the charger’s and batteries’ vital signs with the compact 98x69x35mm dimensions making it easy to store and transport the charger for weekly racing or travelling abroad.

View a list of the specifications and more images here