Red RC » Products

July 9, 2020

Samix SCX10 III 8-piece high-clearance link set

Samix have announced the release of their new 8-piece high-clearance titanium suspension link set for the Axial SCX10 III trail truck. It uses the same suspension links as the previously introduced 10-piece set, however it does not include the steering links. The lower suspension links are of an angled design for improved ground clearance in challenging terrain, improving the truck’s overall climbing performance while adding visual impact and corrosion resistance at the same time.

View more images here

July 9, 2020

Tamiya M-08 aluminium frame post

Coming from Tamiya and made for the M-08 M-Chassis kit is an aluminium frame post set. It includes machined aluminium posts that replace the standard B8 plastic parts for increased rigidity, a more streamlined appearance and a lower weight. The posts come blue anodised for surface protection and visual appearance and in sets of four.

View another image here

July 9, 2020

T-Works RC8B3.2 connector style on/off switch

T-Works have introduced their new connector style on/off switch set for the Team Associated RC8B3.2 buggy. The set includes a machined carbon fibre receiver box cover that incorporates a sturdy XT-style connector that acts as an on/off switch using the included jumper plug. The whole assembly does away with the need for a standard mechanical switch in favour of a more robust solution that is less sensitive to dust, dirt and moisture. The kit is a drop-in solution and it includes pre-wired standard universal-type receiver and battery connectors.

View another image here

July 9, 2020

R1 Wurks V16 Drag Racing Tuned 3.5T & 4.5T motors

Coming from R1 Wurks are their new V16 Drag Racing Tuned 4.5T 7500kv & 3.5T 9000kv motors. For the past few months, R1 Wurks been testing and gathering datalogs using their Digital 3 ESC, from some of the fastest RC drag racers around the U.S.. That amount of data allowed the company to understand the need for efficient power conversion, with the goal of generating the most power while controlling the amp draw to a minimum. With that goal in mind, R1 Wurkd created a line of custom built motors set for different budgets to make the most bang for the buck. Our base tune starts with the Drag Racing Tuned variant and upgrades go all the way up to the All Out Build. The full build comes with winding resistance measurements, rotor magnetic data sheet, sensor alignment, hand picked stator, full titanium screw kit pro installed and the gold standard in ceramic bearings, all pro installed. Other builds include hand-picked stators, aligned sensors and hand-picked stators, as well as aligned sensors, hand-picked stators and titanium screw kits. Full details can be found on R1 Wurks’ website here.

Source: R1 Wurks [r1wurks.com]

July 9, 2020

Smokem Racing R12 carbon fibre camber link shim set

Coming from Smokem Racing and made for the ARC R12 touring car is a carbon fibre camber link shim set. Made from 100 percent carbon fibre, their design allows racers to adjust the inner camber link position on the ARC R12 with ease. No longer there is a need to completely remove the upper link brace, add or remove spacers but with the shims drivers simply loosen the screws, remove or add shims as needed, then retighten the screws. The set comes complete with four shims in 1.0mm thickness and four shims in 1.5mm thickness.

View another image here

July 9, 2020

Ministry Of Bearing S35-4E fan mounts

Available now from Ministry Of Bearing is are their new carbon fibre fan mounts for the SWorkz S35-4E 1/8th electric buggy. Machined from high-quality carbon fibre the mounts attach to the centre bulkhead, pointing towards the motor can for sturdy and reliable mounting of a motor cooling fan. The mounts are available for 30mm and 40mm fan units and aluminium threaded inserts ensure proper mounting of the fan unit.

View another image here

July 8, 2020

JConcepts B6 series 15.5mm alloy servo horn

Coming from JConcepts and made for Team Associated’s 6th generation buggies and trucks is a 15.5mm aluminium servo arm. One of the critical points of racing comes from the steering servo and proper servo horn. The horn transfers all the torque from the servo to the steering bell cranks and this piece needs to be created with precision and durability. The JConcepts servo horn created for both 23T and 25T count has all the geometry necessary as a direct bolt-on for the B6, T6 and SC6 generation of vehicles. The broad base of the horn tapers to the connection area where the steering takes place. The heavy-duty boss on top protects the ball-end and provides a hefty surface for steering direction. Small ribs have been added on the sides to help strengthen the unit in a twisting fashion and a deep pocket hides the 3mm standard mounting screw. The entire horn has been retouched with chamfer highlight edging and laser etched with JC and the tooth count for high-end looks and authenticity.

View more images here

July 8, 2020

Rusti Design XX4 rear pivot brace

Rusti Design have introduced their new rear pivot brace for the vintage Team Losi XX4 buggy. Made of 5mm carbon fibre sheet the brace prevents the pivot block to be ripped off after hazardous jump landings or hard crashes. The carbon fibre part needs to be assembled with two bolts on the plastic part and it requires to flush the bossing on the rear bumper and longer flat head screws to be mounted on the chassis. Not included are the 4-40 UNC button head screws and 3/16” lock nuts needed for installation.

View more images here