Red RC » Products

December 13, 2019

Revtech X-Factor modified motors

Trinity have introduced the new Revtech X-Factor modified brushless motors in a range of 3.0T to 9.5T windings. The power plants utilise a highly machined aluminium case for exceptional heat dissipation and this, in combination with highest quality materials, gives virtually zero fade during a run. New and improved solder tabs now make wiring even easier. A huge variety of optional roots such as 12.3mm long, 12.5mm long, 11.5mm, 12mm, 12.5mm and 13mm allows to tune to power to the drivers preference. The motor is available in 3.0T up to 7.5T windings in even and .5 variants and also as 8.5T and 9.5T versions.

View more images here

December 12, 2019

Fenix G56-12 1/12th scale pan car – Coming soon

Fenix Racing have released a first image of their forthcoming new G56-12 1/12th scale pan car. The vehicle will utilise a V-link design to mount the rear power pod, promising exceptional traction and side bite while the highly adjustable front end with lower carbon fibre and upper moulded arms ensures high corner speeds. Full details and more images will become available soon.

Source: Fenix Racing [fenix-racing.com]

December 12, 2019

DE Racing 8ight-X & MP10 BumpSkids & rear skid plates

Coming from DE Racing are their new BumpSkids and rear skid plates for the TLR 8ight-X and Kyosho MP10 buggies. Starting with the BumpSkids, they combine a well functioning front skid plate with a refined front bumper to create the ultimate in protection, performance, and styling. As for the rear skid plates, like the front BumpSkids, these are ultra thin, they wear like aluminium and save the chassis from becoming overly scratched or damaged. They are sold in packs of three and use the original bulkhead mounting hardware.

View more images here

December 12, 2019

Xtreme Racing T4’20 carbon fibre motor spacer set

Xtreme Racing have introduced their new carbon fibre motor spacer set for the Xray T4 2020 touring car. When running a motor without or just a small chamfer, the motor can may hit the top plate when running a smaller spur gear. The set includes a 1.2mm and a 2.0mm thickness spacer that locates the motor further away from the motor mount and top plate, allowing top use a wider range of gear ratios with specific motors. The spacers are designed to be held into the motor so they are easier to install but can be removed if needed. The set also includes miscellaneous fasteners.

View another image here

December 12, 2019

Team Associated Women’s WC19 T-shirt

Team Associated’s new WC19 T-shirt is now also available for the racing ladies out there. The black T-shirts are 100 percent pre-shrunk cotton and available in three sizes for women. Colourful splashes behind the Team Associated logo emblazon the front while Team Associated’s Champions by Design logo is decorating the back.

Source: Team Associated [associatedelectrics.com]

December 12, 2019

Reds Racing Tetra V3.0 off-road clutch system

Coming from Reds Racing is their new Tetra V3.0 clutch system for 1/8th off-road vehicles. The updated clutch features a new dust-proof flywheel that has been redesigned compared to the previous version in order to better protect the engine’s front bearing from dirt even in very dusty track conditions. Furthermore, Reds Racing have improved the shoes and springs to optimise fuel consumption and performance. The shoes and springs can be used on the previous clutch versions and the V3.0 is available in a total of four variants; with 32mm or 34mm flywheels and as aluminium clutch of medium inertia, good on all types of track layouts and also as steel clutch with high inertia, recommended for low grip tracks. Both clutches utilise four aluminium shoes and 1.0mm springs but they can be outfitted with optional parts carbon shoes and 1.1 mm springs.

View another image here

December 12, 2019

Xray T4’20 2-piece 0.25 eccentric suspension holders

Xray are busy introducing more option parts for their all-new T4 2020 touring car. The latest to hit the light of the day are split 0.25 eccentric suspension holders that enable the driver to have even more control over the lower arm toe-in settings as they allow for 0.25 degree increments. The suspension hangers are machined from high-quality 7075-T6 aluminium and they come black anodised and laser-etched for easy identification. They are usable with the standard kit composite suspension inserts and are available from now on.

View another image here

December 12, 2019

Xray XB4’20 large volume centre differential set

Coming from Xray and made for their XB4 2020 1/10th scale 4WD buggy is a large volume centre differential set. Using the diff will increase traction on slippery track while also improving car handing over bumpy sections where it helps to absorb bumps better. The larger oil volume prevents the diff from overheating, extending its lifespan. The super-smooth gear diff set includes a composite case and cover with exchangeable spur gear. The set includes a 81T spur gear with a range of sizes being available to fine-tune the gear ratio. The internal gears are precision-moulded from tough composite material, ensuring long lifespan and super-smooth, efficient operation.

Source: Xray [teamxray.com]