Evo Race Factory have introduced their all-new ARS3 190mm touring car body shell for the ever growing FWD on-road class. Sporting a high waist, low roof design the body is a bit of a different approach compared to most FWD lids out there with more of a sedan-style silhouette rather than being a hatchback. The body will come moulded from clear high-quality polycarbonate and it hits stores very soon.
Coming from Exotek is a range of aluminium optionals for the TLR 8ight-XE 1/8th scale electric buggy. First up is a cooling motor mount whose 7075 alloy construction offers improved motor cooling because the stock rubber gaskets are removed therefore allowing the motor heat to directly transfer through the mounts and into the chassis. In addition, a fan bar is included that attaches to the motor mounts allowing the use of a high powered 40mm cooling fan. The new universal 1/8th scale motor clamping style also makes for easier motor install and removal by simply removing the two upper clamps to lift the motor right up and out. Lastly the motor position has been lowered by 1.5mm for a lower centre of gravity.
German Futaba distributors ACT Europe have introduced the new HPS CT700 high-performance servo. Featuring a machined all-metal case and all-metal gears, the servo was designed especially for the use in RC cars where the efficient HPS brushless motor ensures a cooler running servo and less power consumption. Offering a speed of down to 0.07s and a torque of up to 30kg-cm the servo measures 40.5 x 21.0 x 26.2mm and it weighs in at 54g. It is Furaba S.Bus2 and SR-Mode compatible, allowing to use the fastest transmission modes on the Futaba T7XC, T7PX and T4PM radios. An all-black receiver wire makes for a stealthy factory appearance.
Source: ACT Europe [act-europe.eu]
O.S. Engines have announced the soon release of their new O.S. Speed R2104 World Champion edition 3.5cc nitro on-road engine. The power plant will be issued to celebrate Shoki Takahata’s 2019 IFMAR 1/8th Nitro On-road World Championship title, which was also a maiden Worlds win for an O.S. Speed engine in the 1/8th IC Track category. The team went 1-2 in the main final with Takaaki Shimo taking the vice championship and to commemorate their effort, the World Championship edition will feature a gold-colour venturi insert , a two-tone black and golden cooling head as well as a laser-etched crankcase. Included in the special edition is also a T-2080SC based exhaust set. The engine will hit stores by the end of December.
Coming from RC Discharger are two new power supplies with 750W and 1200W power. The server-style power sources feature triple bullet-type outputs for maximum connectivity for DC chargers and accessories while a protection plate keeps the outputs from damage or breakage. The devices are usable with 100 to 240VDC input and they measure 38x89x197mm.
Source: RC Discharger [rcdischarger.com]
Xray have introduced the 2020 variant of their IFMAR World Championship winning XB4 1/10th 4WD electric buggy kit. The popular vehicle underwent some sort of a redesign for the new season with a longer chassis making for improved stability while a more narrow design in the bulkhead area allows the use of optional longer arms. The gearboxes also saw an update, making them more narrow to make way for the new narrow suspension mounts and thus updated arm positions. A rear gearbox raiser plate improved the gearbox’s position when running in high-bite track conditions and inside the bulkheads operate redesigned gear differentials with larger oil volume, resulting in more consistent performance over a run. Part of the new diff package are also separate new-module crown gears and composite diff covers for better serviceability and a lower weight. Also new in the driveline area are new module crown gears for more efficient operation as well as centre driveshafts with larger 2.5mm cross pins. New, longer front and rear outer driveshafts, an updated motor mount for easier pinion gear access as well as an all-new centre upper graphite brace and a shorter slipper assembly with a wider adjustment range round out the drivetrain package. Other features include new aluminium roll centre mounts on rear uprights with updated roll centre positions, a revised rear graphite shock tower can be mounted from both sides of the gearbox to fine-tune the shock setup weight balance, and reinforced servo saver stands make for improved steering precision while a new shape improves clearance. The kit is rounded out by an improved servo mount system to optimise steering consistency in high traction conditions. The kit has already shipped and should be available by the time you read this.
View a list of the key features and more images here
Coming from T-Works and made for the TOP Racing Rebel 12 pan car kit are two new lightweight screw kits. Available as UFO and Standard head sets, both kits include high-quality red anodised 7075-T6 aluminium screws as well as 64-grade titanium fasteners with both combined making for a significant weight saving compared to the standard steel screws. Both sets include 39 fasteners each and they are available now.
View the standard head screw set here
Coming from Revolution Design Racing Products are new aluminium optionals for the popular Sanwa M17 and MT-44 radios. First up is an aluminium steering wheel usable for both the M17 high-end and MT-44 intermediate level radios. It is a quick and easy way to personalise the transmitter to the maximum as it is machined from high-quality aluminium and of a cool new turbine design that greatly enhances the overall appearance of the transmitter while offering improved stability for more precise steering action. The steering wheel is available in seven different colours including black, blue, light blue, green, gold, orange and red while machined silver colour edge details and a laser-engraved logo make the wheel stand out. The part is a direct fit and can be combined with RDRP’s new Sanwa M17 RDRP0501 dial and nut set.
