November 23, 2019

AKA Scribble 1/10th buggy tyres

AKA have introduced their new Scribble 1/10th buggy tyre, the first of a range of new tyres coming for the 2020 season. The Scribble series of tyres is a clean sheet redesign and will set the foundation of AKA’s 1/10 buggy tyre line up going forward. The design objectives were two fold; The first design objective of the Scribble was to extend the performance window. To accomplish this the designers concentrated heavily on getting the tyre to wear even across the entire carcass no matter the tread depth. The Scribble carcass and tread were designed together to compliment the properties of AKA’s clay compound resulting in even wear across the tyre. The equal wear across the entire tread pattern creates a tyre that will hold its max performance for run after run without hyper sensitivity to tread height. The second design objective was to have a competitive tyre right out of the bag with little to no prep. The unique, flowing tread design has been developed specifically around the properties of AKA’s clay rubber compound. The height, width and density of the tread has been thoughtfully engineered to provide race ready lap times out of the bag with little or no prep. The tyre will hit stores in December as 2WD front, 4WD front and general rear tyre in Clay compound and including red closed cell inserts.

View the 4WD front and 2WD/4WD rear tyre here


November 23, 2019

Volante Super Precision 7-spoke wheels

Volante have announced the release of their new Super Precision 7-spoke wheels for 1/10th on-road rubber tyres. Realistically looking the precision-moulded rims set themselves apart from the usual dish rims and allow to build more scale looking wheel sets. The rims come in sets of four and are usable with most of today’s 1/10th touring car rubber tyres while also being available as pre-glued wheel sets utilising the new V7T rubber.

Source: Volante [volantetire.com]


November 23, 2019

Pro-Line Street Fighter HP 3.8″ belted tyres

Pro-Line have introduced their new Street Fighter HP 3.8″ belted tyres that come pre-mounted on black Raid 8×32 removable hex 17mm wheels. The tyres feature a high-performance herringbone weave pattern belt inside of the tyres that will prevent the tyre from ballooning or expanding during use. This will give maximum control to put the power down even at high speeds. The tyres are made using the soft M2 compound and utilise aggressive tread grooves for grip and durability. The tyres come as pairs and are pre-mounted on Pro-Line’s Raid 8×32 removable Hex 17mm wheels, making the ideal for all monster trucks that use 3.8″ wheels and tyres.

View another image here


November 22, 2019

Picco P3X 3.5cc nitro off-road engine

Kyosho Europe have introduced the new Picco P3X 3.5cc 3-port nitro off-road engine. An update to the popular Blast, the P3X features a new vacuum injected crankcase for durability, and a lightened high-quality silicone-filled and balanced crankshaft whose super strong material does not need additional DLC coating. Also new are a CNC-machine backplate with extra scoop for additional performance while a Japan-made blue seal front and high-quality ceramic main bearing ensure smooth operation in all RPM ranges.

Source: Kyosho [kyoshoeurope.com]


November 22, 2019

Shepherd Velox V10 advanced weight system

Following the release of the advanced weight system for the Velox V8.2 Shepherd now also introduce a version for the Velox V10. A prototype has already showed its performance in the hands of Patrick Nähr who claimed his first ENS victory at the season final in Ettlingen. The set is a direct replacement for the regular or brass battery mount and is suitable for battery packs with a maximum footprint of 15x32x85. It includes a 7075-T6 aluminium tray, two 18g balancing weights, a composite battery-brace as well as all necessary mounting hardware. The 18g weights are equipped with additional countersunk holes making it possible to stack weights if needed. Without stacking a total of five weights can be installed. To install the battery pack two holes need to be drilled in existing radio plates while all future batches will feature the mounting holes out of the box. The set as well as all individual items will be available from next week on.

Source: Shepherd [team-shepherd.com]


November 22, 2019

GForce Bullet-D 4200mAh racing pack LiPo battery

GForce have announced the release of their new Bullet-D 4200mAh LiPo battery pack that mimics the shaped of an NiMH racing pack. The oval diameter design comes in handy especially when looking for a battery pack that is compatible with certain Tamiya or Kyosho cars or when running in vintage racing classes. The battery is built from high-quality 50C cells for exceptional power supply, it measures 134x45x23.5mm, and it comes pre-wired with a T-type connector and an XH balancer port.

Source: GForce [gforce-hobby.jp]


November 22, 2019

LRP black brass battery weights

LRP have introduced their new under LiPo brass battery weights. The weights are ideal to up the overall weight of on-road and off-road cars while allowing to lower the overall centre of gravity when running low centre of gravity battery packs. The weights are available as standard battery sized 139x47x0.5mm 28g, 139x47x0.79mm 44g and 139x47x1.05mm 59g variants and also as shorty battery sized 97x47x0.27mm 10g, 97x47x0.76mm 30g, 97x47x1.0mm 39g and 97x47x1.65mm 65g plates. All come with a black surface coating and in packs of two per size.

View the other balance weights here


November 22, 2019

7075.it T4 2020 aluminium & brass optionals

7075 Special Parts from Italy have introduced first option parts for the Xray T4 2020 touring car. First up is a low centre of gravity aluminium main chassis that allows for easy placement of balance weights using single screws. Machined cut-outs enable the racer to position optional brass weights which not only adds to the overall appearance but the weights are also secured in a much safer manner compared to just using tape to securing them to the chassis. The main plate comes machined from high-quality 7075 aluminium, it sports a black surface coating for wear and it is available separately or including a set of low-profile brass balance weights.

Continue reading here