Red RC » Products

February 25, 2022

Willspeed RF2 conversion for Cougar LD2

Willspeed have produced their RF2 conversion for the Schumacher Cougar LD2. The conversion platform was designed and manufactured by engineers and racers alike for the true ultimate in performance on medium to high traction surfaces. The RF2 design focuses on moving the weight bias forwards by utilising a 5 gear transmission which allows the motor position to be moved further forwards creating a smaller located area of main mass which aids to control weight transfer. The billet aluminium tub chassis is the ultimate in chassis design, the centre of gravity is super low, the chassis has no additional guards or stiffeners removing unwanted tweak and is self integrally stiff. The aluminium selected for its natural dampening properties this not only allows for an incredibly agile platform its also super predictable. The end result, a platform that not only loves corner speed but it is also dependable and predictable lap after lap making going fast, easy.

View more details & images here

February 25, 2022

Mon-Tech GTI Vision Mini body

More new items from Mon-tech Racing. Following the GTI Vision FWD, the Italian brand is pleased to present the GTI Vision 1/10 Mini for the M-chassis category. The GTI Vision Mini is the first in a series of Mini 1/10 bodies that will be introduced by Mon-tech in 2022. The body is produced in Italy using high-quality Lexan polycarbonate and comes with a detailed decal sheet including headlights and grille stickers, window masks and wing mounting hardware.

View more images of the body shell here

February 25, 2022

Bittydesign Ahura 1/10 GT 190mm body shell

Bittydesign have released a new product for the 1/10 GT 190mm segment, the all the Ahura body shell. This project was born from the desire to create a body shell outside the box thanks to a futuristic aesthetic, proportions and shapes that make it unique. The body shell is universal and mounts on all 1/10 190mm models, while the wing complies with the measurements as per USGT regulation and can therefore be used at any race. The shapes inspired by a GT3 racing car have been adapted to the proportions and dimensions necessary for use with the 190mm electric models. The design phase took several months to finish every single detail, the attention to detail was obsessive in order to produce a body that could optimise aerodynamics and at the same time remain real in its proportions and aesthetics.

View more images of the Ahura here

February 25, 2022

RC Maker X4 fan shrouds, turnbuckle tool & M17 triggers

RC Maker have presented their brand new 3D Pro Products beginning with their adjustable, direct mount fan shrouds for the Xray X4. Mounting directly to your motor mount, the shroud features adjustable positioning so you can adjust the gap of the fan from your motor for optimal cooling running different classes. Available in 30 & 40mm. They have also got a handy turnbuckle tool for Xray, which makes building turnbuckles a breeze for the X4, T4, X12, XB4 and XB2. Last but not least, there is some different sized trigger inserts for the Sanwa M17, so you can tune your trigger to your finger size and position for comfort and consistency whilst behind the wheel.

View the other new items here

February 25, 2022

1up Racing competition ball bearing sets

Let your drivetrain glide on a set of 1up Racing competition ball bearings. Featuring polished deep groove chromium steel inner and outer races and precision balls, their bearings aren’t just incredibly smooth, they’re incredibly durable too. 1up have selected a high ABEC rating to reduce slop in the drivetrain for improved feel and overall traction. To ensure they roll freely, they feature dual metal shields and come pre-oiled with their clear bearing oil. Sets are available for Team Associated B6.3, B6.3D, B74.1, B74.1D, T6.2 & DR10, TLR 22 5.0, 22X-4, 22T 4.0, Awesomatix A800MMX, Mugen MTC2 and Xray X4

Source: 1up Racing [1upracing.com]

February 24, 2022

Reedy Zappers DR 6600mAh SQ battery

Reedy’s new drag specific Zappers DR 6600mAh SQ-configuration batteries are now available. The SQ, or ‘square’ configuration was the brainchild of the Reedy engineering team as a superior alternative to saddle packs. While the design ran out of favour in the 1:10 off-road racing world, it shines in the drag racing world thanks to its low centre of gravity and wide footprint, which provide excellent stability without sacrificing performance. Zappers DR batteries use state-of-the-art LiPo chemistry with advancements in construction that result in improved power output and internal resistance without sacrificing durability. The pack features a 3.8V/cell nominal voltage, which means that the battery can be safely charged to 4.35V/cell. It is not a secret that more voltage equals more power, so there is no easier way to increase power and top speed than a higher charge voltage. But even when the typical 8.44V (4.22V/cell) charging limit is enforced, Zappers DR shine thanks to their inherently flat discharge curve, which results in higher voltage when multiple passes are required between charges.

Source: Reedy [associatedelectrics.com]

February 24, 2022

Rêve D SPM large diameter button head screws

Rêve D have introduced this large diameter button head screw in their popular SPM (Super Precision Machine Cut) titanium series, with ultra-high precision machine cut. By making the shape of the screw head with a larger diameter of 7mm it is possible to securely fix parts without using washers or load spreaders. The screw, which is processed with high precision using a lightweight and highly rigid titanium material, not only reduces the weight of your machine, but also enables accurate machine build-up. Available in 3 types, M3×6mm, M3×8mm and M3×10mm.

View more images of the new screws here

February 23, 2022

Team Associated RC8B4 & B4e Team kit

Team Associated have released their new RC8B4 and B4e 1/8th buggies. Innovative front-end geometry with reduced kingpin inclination steering blocks places the wheel pivot in the centre of the front tire for increased stability and consistent steering through the entire steering throw. New gearboxes are specific to front and rear, with the front gearbox featuring a 3.5 deg. inclined pinion gear angle to straighten the centtr driveshaft for increased drivetrain efficiency and reduced phasing and vibration. The rear gearbox features a 0 deg. pinion gear angle and centre mounted rear chassis brace mount. A new front upper suspension arm design is designed to accommodate a wide range of flex and stiffness options with optional inserts to be made available for fine tuning flex and stiffness and will fit on the top or bottom of the arm. The arms also includes a moulded ‘wing’ insert for increased front-end downforce. There is also a new rear suspension and front lower suspension arm design too. A new rear wing mount has adjustable wing angle shims, significant strength improvements, an aerodynamic shape and extra clearance for shock position adjustment. The rear wing itself has more vertical fins for increased straight-line stability, a taller rear wickerbill height for increased downforce, increased strength in various areas to reduce bending fatigue and dimples on the backside as a template for cutout holes. Other updates include the rear chassis brace, new +1mm offset rear hub and for the gas version, a new fuel tank with many new features.

View more images of the RC8B4 & B4e here here