Red RC » Products

February 22, 2022

Reds Racing clutch retainer screws

Reds Racing’s new clutch retainer screws have been designed to provide maximum efficiency. They decided to use Titanium Grade 5 6Al4V over steel due to its high resistance and low weight. The total length of the screw is 10mm, 7mm of which are threaded. This means that the screw protrudes only 3mm from the crankshaft. In this way, you won’t risk any impact on the tank in case of chassis deformation. Moreover, these screws were designed to avoid any rubbing between the bearing and bell. In addition to that, the external diameter of the screws protects the bearing from dust and foreign bodies.

View the retainer screw here

February 22, 2022

T-Works MBX8R flywheel tool

T-Works have produced this new flywheel tool for the MBX8R. One end of the tool features a general flywheel wrench, while the other end is specific to the Mugen, shaped to firmly lock onto their clutch assembly. The entire tool has been made from 7075 aluminium and has been black hard anodised for increased durability.

View the tools usage here

February 21, 2022

Infinity IF14-2 solid aluminium chassis

For the Infinity IF14-2, Creation Model have produced this optional aluminium main chassis plate. This solid aluminium chassis is suitable for high bite carpet tracks, such as US style black carpet where you want to limit flex in the chassis. Machined from 2mm high quality aluminium and finished with black anodising.

View the top side of the chassis here

February 21, 2022

Exotek 22S alloy gearbox

Exotek release their ‘bullet proof’ gearbox for your high powered Losi 22S build. This heavy duty machined alloy gearbox keeps your gears in perfect alignment, your slipper and motor cooler and the wheelie bar pointed straight. A direct bolt on for the Losi 22S series it weighs 43 grams and the set includes just the left and right gearbox case.

View more images of the gearbox here

February 21, 2022

RC Maker V2 weighted tweak wheel set for TC

RC Maker have introduced their latest blacked out, innovative and convenient, V2 weighted tweak wheel set for touring cars. No more getting down on your knees at your pit seeing which wheel picks up first, with these weighted tweak wheels you can easily identify which wheel is lifting earlier. With offset weights, the tweak wheels will spin as soon as the earlier lifting corner comes off the ground, making it extremely easy to accurately identify what tweak adjustment needs to be made to de-tweak the car. The set of weighted tweak wheels features ABEC 7 bearings, black 7075 knurled thumb nuts and black coated, CNC machined weights.

View more details & images here

February 21, 2022

T-Works 22 & 16g tungsten balance weights

Coming from T-Works are two more tungsten weights, this time in 22 and 16 grams. The use of the heavy material allows for a low profile design of 1.4mm while still adding a good amount of weight compared to brass weights, with the adhesive backside ensuring easy mounting. The weight comes laser-engraved for easy identification.

Source: T-Works [rc-tworks.com]

February 18, 2022

Yokomo YD-2S rear toe control system

From Yokomo is this new rear toe control system that will dramatically improve the running performance of the YD-2S series. By installing a kingpin shaft on the rear hub carrier and connecting a linkage for toe control, it is possible to change the toe angle in response to suspension operation. Aluminium lower caster blocks, aluminium hub carriers and graphite arm plates are used for light weight and high rigidity. The damper is also mounted on the front side of the suspension arm, which reduces the weight of the rear overhang and gives it a racing look. For example, if the suspension is set to “Bump-in” which changes to “Toe-in” when the suspension is sunk, the car will have smooth turning performance at the entrance of the corner, but when the throttle is turned on at the exit of the corner, the car will accelerate with more rear grip. When the car is set to Bump Out, the rear grip is increased to facilitate acceleration, and when the car is set to Bump In, the car swings out dynamically from a stable straight to create a drift with a long distance. Also, the toe angle can be easily adjusted without steps, which greatly expands the range of settings.

View more images of the rear toe control system here

February 17, 2022

Protoform Nissan GT-R R35 Pro Mod body & Outlaw wing

Protoform are proud to announce a partnership with Nissan. This collaboration begins with bringing the car they call ‘Godzilla’ to the No Prep RC Drag Racing scene for the first time, the Nissan GT-R R35 Pro Mod. The officially licensed body is the ultimate aerodynamic upgrade to your Losi 22S No Prep Drag Car or other 13.2″ wheelbase drag car. They combined the signature wide-mouth grille, side vents and powerful stance of the R35 GT-R with some stretched, pro-mod drag racing proportions to transform your no-prep car into a scale-1/4-mile import beast. It features a built-in spoiler, but for top-level Outlaw Class racers, or you can pair it with the upgrade Outlaw Wing Kit for maximum stability and performance at blazing fast speeds. Just trim the rear spoiler lip off your GT-R™ and mount the wing on the conveniently marked dimples.

View more angles of the GT-R R35 here