Red RC » Products

February 1, 2022

Schumacher Mi8 1/10th touring car

Schumacher have introduced their new Mi8 1/10th touring car. The Mi8 has been developed by Schumacher’s world class engineering team to be faster and better handling than ever. With a lower centre of gravity, lighter weight and fine attention to detail, the Mi8 is a pleasure to build, maintain and to drive. The Mi8 contains all the features and adjustments you need from a high end touring car to take you to the top of the podium. Available with an alloy chassis optimised for carpet racing, or a carbon fibre chassis perfectly suited to asphalt.

View more details & images here

January 31, 2022

Avid 51T-54T 64P aluminium pinions

Avid are proud to announce the release of their 64P aluminium pinions in sizes 51T-54T available individually or in a set, that expand their already popular range. These 64 pitch pinion is made out of 7075-T6 aluminium, hard-anodised to reduce wear and friction, and in a pack of 4 (51, 52, 53 & 54). The details are laser etched onto the pinion for easy notification and it uses the common 1/8″ bore (3.17mm) and includes one set screw.

Source: Avid [avidrc.com]

January 31, 2022

NathoBuilds Fan mount shroud V2

NathoBuilds new fan mount shroud V2 is a perfect way to keep your cars looking trick and temps cool. It’s made from high-quality carbon fibre and 3D PLA+ material and suits most popular 4wd buggies. Designed and manufactured to last, the set includes SS screws with NBR snap lock case and can accommodate 30mm fans.

View the set here

January 31, 2022

Deadfly Fly Juice additive

Deadfly have released their brand new ‘Fly Juice’ additive. Fly Juice has been tested and developed by some of the UK’s top National drivers and has been specially created for rubber & foam tires plus indoor/outdoor surfaces, guaranteeing longer effect and better performance. It comes in a laser marked handy plastic bottle with integrated sponge applicator and sealing cap. All developed, produced and filled in UK. Fly Juice has 3 offerings in the form of Type A, Type B and Type C, each type can be used along side each other offering a greater control in your tire preparation.

Source: Deadfly [deadflyrc.com]

January 28, 2022

R1 Wurks Volta line of motors

R1 Wurks have announced their all new Volta line of motors. The Volta motors lines up right next to their proven V21-S with 13.5, 17.5, 21.5 and 25.5 turn options. This motor produces a ton of punch, mid range and top end and its sleek can design is made for maximum cooling characteristics which helps with this motors efficiency during the longer runs. When testing these Volta Motors with team drivers, they were jumping triples that nobody else could consistently with minimal fade during the run. These motors come with the all new Volta long rotor for maximum torque/overall performance out of the box, no need for any upgrades.

Source: R1 Wurks [r1wurks.com]

January 28, 2022

Willspeed TakeTwo AE B6 series front ball stud mount

New from Willspeed is their TakeTwo AE B6 series front ball stud mount. The front link positions have been lowered by 2mm (-2mm) to allow for lowered inside link mounting to increase initial roll, gain steering and allow further setup options. Intuitively designed to keep weight to a minimum with the complete part weighing in at 16g, only a 4 gram increase over the stock plastic component. Features WS logo on the front face and available in clear, blue and black anodised finishes to suit all manor of builds.

Source: Willspeed [willspeed.co.uk]

January 28, 2022

Axial SCX24 Jeep JT Gladiator 4wd

The 1/24 scale Axial SCX24 Jeep JT Gladiator 4WD makes any spot the perfect setting for RC adventures. Whatever course you follow, the SCX24 chassis meets every challenge with full-time 4-wheel drive, a trail-taming 3-link front/4-link rear suspension and much more. Realistic steel frame rails stand up to hard knocks. Worm gears on the axles increase ground clearance. The new, 22mm longer wheelbase increases stability while steel front and rear axles, front stub axles and steel dogbones let you crawl and climb with confidence. Power is supplied by a Dynamite 88T motor and 2S LiPo battery. An Axial 2-channel radio system is included for precise, dependable control. The authentic scale body includes a driver and detailed interior and is available in your choice of two colours based on the current Jeep® Gladiator factory colours. Scale Tuff Stuff Overland accessories are mounted on the bed rack. Officially licensed Nitto Grappler tires on KMC wheels add realism plus excellent grip on- and off-road. Two LEDs in the front bumper light up the trail for night-time crawling.

View more images of the SCX24 Jeep JT Gladiator here

January 28, 2022

Xray composite chassis side guards

For the XB2 and XT2, Xray have produced these new composite chassis side guards for bent sides chassis. Made from specially-formulated graphite composite mixture, they are perfect for high-traction conditions making the car more stable and predictable. Fits to all length of chassis. Fits XB2C, XB2D, XT2C, XT2D from 2020 version onwards.

Source: Xray [teamxray.com]