January 26, 2022

Exotek Racing XB2 7075 alloy idler gears

Exotek Racing have introduced these hard anodised 7075 alloy idler gears for the complete Xray XB2 series of gear boxes. Available in 38T, 36T and 25T, they are a must have for high powered racing applications. This is much stronger than the stock plastic idler gear but not indestructible so it is important to use black or white grease on the gears and reapply frequently to prolong its life along with proper slipper adjustments.

View the other idler gears here

January 26, 2022

Pirani RC MRX-6 belt tensioner

Italian brand Pirani RC have produced this belt tensioner for Mugen MRX-6R and MRX-6X. It replaces the two original side belt tensioner of the car (one front and one rear) into only one new type in the middle of the car helping to improve the free movement of the drivetrain and increase the life of the side belt. The plate is made of high quality aluminium 7075-T6 and hard anodised in black colour and the kit includes screws and nut to fix it following instruction in the package.

View the complete set here

January 25, 2022

JConcepts B6.3 titanium axle

JConcepts has designed a user friendly and light-weight titanium axle specifically for the Team Associated B6.3. The blooming flower design offers individual pads to support the wheel. This allows the part to reduce even more rotating weight on the axle and with the titanium material supporting the load, offers great durability. The titanium material axle anodised in black has second operation machining and JC laser etched logos for the best look possible. JConcepts has designed a user friendly and light-weight titanium axle specifically for the Team Associated B6.3. The blooming flower design offers individual pads to support the wheel. This allows the part to reduce even more rotating weight on the axle and with the titanium material supporting the load, offers great durability. The titanium material axle anodised in black has second operation machining and JC laser etched logos for the best look possible.

View the complete set here

January 25, 2022

Klinik RC Dry Air Filter for 1/8th offroad

New from Klinik RC is their Dry Air Filter for 1/8th nitro buggies and truggies. Klinik RC’s 100% Dry Air Filter system uses a proprietary synthetic media offering filter efficiency exceeding 99.8%. Stop dust and dirt from entering your carburettor and expensive engine. Simple maintenance and No Messy Oiling. Just blow the dust off from inside-out using low pressure compressed air and if extremely dirty, wash with Maxima Biowash and warm water, rinse from the inside out and allow to completely dr. Tne Dry Filter will replace dozens of foam inserts, oil and cleaners. The dry filter is unique because it’s not foam and it’s not a paper element. Its a synthetic membrane made by a leading desert race team in the USA.

Source: Schumacher [racing-cars.com]

January 25, 2022

T-Works 10 & 5g tungsten balance weights

Coming from T-Works are two new tungsten weights, in 10 and 5 grams. The use of the heavy material allows for a low profile design while still adding a good amount of weight compared to brass weights with the adhesive backside ensuring easy mounting of the weight. The weight comes laser-engraved for easy identification.

Source: T-Works [rc-tworks.com]

January 24, 2022

JConcepts B6.3 servo mount brace

JConcepts introduces this servo mount brace for the B6.3 line of vehicles. Constructed of light-weight aluminium, it has been a staple to racer’s vehicles going back to previous generation vehicles. The simple and sleek design with performance and tracking advantages have spoken volumes throughout the years on the racetrack. The mount fits snug inside the chassis servo mounting area increasing the support while the 2 screw mounting locations are beefy in design and zeroed in for a direct mount to the chassis. The brace has locations on each side for included 3x6mm set screws to help align and maintain servo position during racing conditions, crashes, and hard hits. The set screws are intended to touch-off against the servo case and provide additional support retaining the servo in the intended position which helps maintain consistent steering trim. The servo mount brace can be installed without any modifications or additional equipment in B6.3 vehicles. With a sleek wrap-around design, luster of aluminium, and etched JConcepts.net logo, the brace adds consistency, performance tune-ability with aesthetic appeal. Available in black or blue.

Source: JConcepts [jconcepts.net]

January 24, 2022

Factory Team parts for DR10, SR10, RB10 & Pro2 SC10

Associated release these new Factory Team parts, designed to add adjustability and increase the durability of your Team Associated car. Highly adjustable C and D arm mounts as well as rear hubs allow for fine tuning toe, anti-squat and roll centres to make your vehicle perform as desired on any surface you drive. All of these parts fit: the Pro2 SC10, DR10 RTR, DR10 Reakt Pro Mod RTR, SR10 RTR and RB10 RTR.

View the new products here

Tonisport
Mibosport
LC Racing
VP Racing
SRT
RCXX
Monaco RC
T-Works
RC Mart