Red RC » Wheels

February 17, 2022

Pro-Line Victory 35/85 belted street tires

Transform the handling performance of your Arrma 3S Street Bash vehicle with Pro-Line’s all-new Victory 35/85 belted street tires. Taking inspiration from full-size high-performance competition track tires to give your Vendetta or Infraction 570 Mega the ultimate tire for scale looks, street performance, and long-lasting wear. A High-Performance herringbone weave pattern belt reinforces the inside of the Victory for high-speed runs with zero tire expansion, while the S3 compound provides long-lasting tire wear. They come pre-mounted on grey split-spoke Arrma wheels so you don’t have to worry about gluing your tires or waiting for them to dry.

View another image of the tires here

January 20, 2022

Pro-Line 1/6 Method 305 NV aluminium wheel

Pro-Line is proud to announce another partnership, this time with one of the leading performance wheel manufacturers, Method Race Wheels. This collaboration begins with bringing their popular 305 NV Wheel style to your SCX6 rock crawler. These machined 12-spoke aluminium wheel faces bolt up to your stock Axial SCX6 bead-lock plastic wheels to create the ultimate scale rock-crawling wheel. All the details from the 1:1 Method wheel are recreated in 1/6 scale, including the 2-tone bronze & black anodised finish, debossed Method logos and black centre wheel-nut cap. The Method 305 NV wheel faces feature a 17mm Hex Pocket and match the stock SCX6 wheel offset.

View another image of the 305 NV wheels here

January 1, 2022

Fenix foam truer F1 wheel adaptor

As foam tires gain some popularity in F1, Fenix have released this wheel adapter that fits all the popular 8mm tire truers. Designed to be wobble free, it is black hard-anodised and is usable with all 14mm hex F1 rear wheel and 10mm front ball bearing wheels.

Source: Fenix [fenix-racing.com]

December 22, 2021

JConcepts Mono RC10 Truck front & rear wheels

JConcepts supports the vintage RC enthusiast with the release of new Mono wheels. The original offset wheels for the RC10T have been highly sought-after for years by drivers looking to outfit a restoration project or racers actively racing their vehicles. The 2.2” Mono wheels are inspired by the originals, feature the iconic dish shape with the front utilising the non-flanged 3/16 x 3/8” bearing and the rear the pin drive setup for 3/16” axles. The wheels include a vent hole on the outer diameter and an outer lip to reduce the ability for glue to run down the face of the wheel during application and curing. JConcepts wheels are moulded in a durable material with precise techniques to ensure dependability and performance. Mono wheels are available in bright white and fluorescent racing yellow, packaged 4 pieces per package and backed with JConcepts racing heritage and customer support.

View the other Mono wheel options here

December 20, 2021

T-Works 1/10th truck wheels

From T-Works comes these wheels suitable for the TLR22T 4.0 as well as the Associated T4.3, T5M and T6.1, Tekno ET410 and Yokomo YZ-2T F&R. Featuring a 12mm hex, they are available in both yellow and white and come in either a pack of 4 or 8 pieces.

View the other wheels here

November 16, 2021

JConcepts Hazard 1.9″ aluminium wheel

JConcepts has transformed the popular Hazard wheel into an aluminium and multi-material combination design that has a vibe like no other. In addition, included in the package are brass weights which cleverly assemble to the centre beadlocker of the wheel to add lower weight. The three-piece design consists of the aluminium machined inner and outer sections along with injection moulded centre beadlocker. The uniqueness of this combination allows quadrant mounted brass weights which drop in place and secure with steel hardware. The outside of the wheel provides all the detail with blasted finish, machined lip, built-in 12mm hex and threaded boss areas for assembly. The inner aluminium part balances the look and provides beefy locations for assembly with M2 x 6 screws to give the proper squeeze of components. A highly detailed, black anodised aluminium centre cap is also featured in the wheel set which installs after the wheel assembly is secured to the vehicle. Centre caps install over traditional 4mm wheel nuts and are secured with small and included M1.6 x 5 screws. Each Hazard wheel fully equipped with all 4 brass weights tip the scales at ~113g minus hardware.

Source: JConcepts [jconcepts.net]

October 28, 2021

SSD SCX24 aluminium & brass rims

For the Axial SCX24, these new SSD aluminium and brass rim are a unique option that combines stock wheel offset in a hybrid aluminium and brass beadlock configuration. Compatible with 1.0″ size tires, these three piece wheels look incredible and are a great way to dress up your SCX24. Plus, the additional weight of the aluminium and brass design adds 24 grams of weight per wheel (96g for four wheels), and will help keep your mini rig stuck to the rocks when the trail gets technical. Package includes two wheels.

Source: RC Mart [rcmart.com]

October 19, 2021

JConcepts Rustler & Stampede Super Dish wheel

JConcepts is bringing the Super Dish wheel to the line-up available in bright white and gloss black colours for racers wanting the retro look while being distinct in appearance. Available for the Traxxas Rustler & Stampede, the 2.2” size is compatible with a huge assortment of JConcepts stadium truck tires and all other brands on the market. The wheels are injection moulded in durable material and designed for reliable use on the track or in bashing sessions. The 2.2” bead areas are already scuffed for better glue adhesion and pre-vented in two places for air escape and proper breathing once glued and mounted to tires are added. At the base of the ‘super dish’ are recessed sections for weight removal and identifiable looks while on the back, the inner ribs provide the support in an array pattern and nipped and rounded in the proper areas. The 12mm hex area is recessed to support standard hexes and chamfered on the leading edge for easy on and off cycles.

View the wheel sets here