Red RC » Electric

December 26, 2020

Yeah Racing Hackslider mini gyro V3

Hold that perfect drift angle combined with high speeds with this Hackslider mini gyro V3 from Yeah Racing, pre-loaded with a customised firmware for Drifting. It comes with aluminium Heat-sink case for high efficiency cooling and features adjustments to suit every servo on the market, ranging from analog to digital servos and you can also reverse the direction which the gyro acts. The gain (or sensitivity) can be adjusted on the fly for drifters with transmitters featuring more than three channels and also can be adjusted on the gyro itself. With the super small footprint, you will be able to mount this gyro anywhere and create very clean installs.

Source: Yeah Racing [yeahracing.com]

December 22, 2020

Nathobuilds battery voltage checker

Nathobuilds have released their simple battery voltage checker. Great for seeing if your 1S-6S LiPo battery is charged, it features gold plated 4/5mm bullet connectors and displays voltage on a blue or green LCD screen. The checker is also reverse connection protected.

Source: Nathobuilds [nathobuilds.com]

December 15, 2020

Pilot RC Products Titanium Reedy motor screw set

Pilot RC Products have announced their new Titanium Reedy motor screw set. This Grade 5 Titanium screw set is produced to perform awesome and look even better and includes a full set of both case and timing screws. The Titanium material helps shed weight while increasing strength compared to the standard steel fasteners and can better withstand the forces seen in today’s super competitive motors to ensure that your timing and amperage settings stay the same without bending or warping.

View the screw set here

December 15, 2020

XactRC IRx 5mm bullet & 12 gauge wire

From XactRC come some wiring products including these IRx 5mm bullet connectors. Featuring a low profile top with a recess for soldering your wires to keep the wire low, it also helps prevent it from hitting the inside of the body. These solid connectors are gold plated for low resistance, high current/voltage using 6 prongs to keep efficient contact with your batteries. Includes two IRx 5mm bullets, one red shrink tube, and one XactRC shrink tube in black. Also from XactRC is this IRx black 12 gauge very flexible silicon wire, made from the highest quality materials to ensure you get the best connection with the least amount of resistance. Made with 680 strands of tin-plated copper wire, each with a diameter of 0.08mm to ensure less degradation of your wire compared to a bare copper wire stands. Offered in 3-foot or 25-foot lengths.

View the silicon wire here

December 14, 2020

Muchmore Fleta ZX V2 drag racing brushless motor

Muchmore is the latest brand to join the drag racing craze with the release of their new Fleta ZX V2 drag racing brushless motor. A newly designed stator and rotor provides maximum torque while producing some extreme RPM. Based on their tried and tested Fleta ZX platform, it incorporates the highly machined Flow-Max 2 aluminium can, heavy-duty solder tabs and an adjustable timing end plate. The motors are available in 3.5T and 4.0T variants.

Source: Muchmore [muchmoreracing.net]

December 11, 2020

Muchmore alu turbo cooling fans for motor & ESC

Two new aluminium turbo cooling fans from Muchmore for the motor and ESC. The cooling fans are available in 30mm and 40mm version and both feature a machined aluminium outer shroud and both come supplied with a fan mount to easily attach the fan to your car’s chassis plate. The 30mm version comes with a standard ESC plug but also includes an extension cable with JR type connector to connect to your ESC while the 40mm version comes standard with a JR type plug.

Source: Muchmore [muchmoreracing.net]

December 11, 2020

Team Powers Mini-spec Radon ESC

From Team Powers comes their new smaller Mini-spec Radon speed control. Approximately 30% smaller than the standard Radon Series Speed control it is compatible with Radon series speed control firmware. Supporting Ch3/Ch4 Aux Input signal to control different item function values, this can be set directly from the LCD card. Comes supplied with 14AWG high density copper soft wire.

View more details here

December 11, 2020

XactRC IRx charge leads

XactRC’s new IRx charge lead is a 2-foot long 2S charge lead that is a must for those looking for low IR’s when charging. Using the highest quality bullets & plugs and high strand tinned copper wire that has the best performance over time compared to a bare copper wire that will degrade, it features a very flexible silicone tubing over the wire, black XH balance plug and a waterproof shrink wrapped balance plug for increased strength when plugging into your battery. It has been finished off with a black nylon mesh for each wire and centre of the lead which is finished off with their printed XactRC logo to hold it together. A great product to help you get the edge out of your batteries and will last to rigorous charging cycles. Available in two versions, one with 5mm & 4mm bullet connectors and one with 5mm bullets & XT60 plug.

View the bullet only version here