July 14, 2014

Wild Turbo Fan Mad Max 3D fan mount

Wild Turbo Fan Mad Max 3D fan mount

New from Wild Turbo Fan and Mad Max Products comes the Mad Max 3D fan mount. Different from conventional fan mounts with only a small contact area, the unique 3D design allows a much stronger connection to the motor using a custom made carbon fibre cross brace and an aluminium stopper. This fan mount is usable with 30mm to 40mm fans including WTF’s Windy fan and will fit the Awesomatix touring car and most belt driven cars. The design allows to take of the fan using only one screw after initial assembly and the mount is of a very low weight at only 5.8g. Included with the mount comes all needed hardware as well as two different carbon mounting brackets.

Click here to view more photos


July 11, 2014

Yokomo YZ-PS25A 25 Amp power supply

Yokomo YZ-PS25A 25 Amp power supply

Yokomo introduce the YZ-PS25A power supply for the use with 100 to 240VAC input. The device offers 12VDC and a maximum of 25A of output current, enough even for very powerful charger and tyre truers. An LC display informs about the current voltage, wattage and temperature while a separate 5V/1A USB port allows you to power your mobile devices. Due to the design of the power supply it can be directly mated with Yokomo’s YZ-110Duo charger with the help of two dual bullet-type connectors, limiting the amount of wires on your pit table for a clean and sleek look. Both the power supply and charger are also available as a combo set from mid-July.

Click here to view more photos


July 10, 2014

Hacker Tensoric8.2 speed controller

Hacker Tensoric8.2 speed controller

Available now from German company Hacker is their latest 1/8th brushless speed controller, the Tensoric8.2. Designed for the use with 2S to 6S LiXX cells, the speedo builds on the experience gained with the Tensoric8 and it features a completely redesigned and more powerful PCB power control board, a newly designed heatsink and a switched high voltage BEC system that allows to choose between 6V or 7.4V output for the use with standard or high-voltage compatible servos. All that is housed in a new fibre-reinforced case with lower aluminium heatsink. Mounting holes in the lower case make it possible to mount the speedo to the chassis or radio tray, doing away with the need to use double-sided tape which results in improved reliability. From stock the ESC comes with a software profile optimised for Hacker Skalar8 brushless motors but with the use of the optional Progbox V1 or V2 the controller can also be adapted to any other brushless motor while allowing to fine-tune the countless software parameters as well.

Click here to view the specifications and more photos


July 1, 2014

Scorpion Z-1410-8500kv Mini-Z brushless motor

Scorpion Z-1410-8500kv Mini-Z brushless motor

Following the release of their first ever line of car-related brushless motors Scorpion now also have an optional motor for Kyosho Mini-Z VE vehicles available. Made to fit both the Mini-Z on-road and buggy chassis, the motor is made using aero grade aluminium and ultra high quality 0.2mm stator steel with high temperature resistant magnets and enamel wires, to work with high efficiency and to produce higher peak power and higher torque in combination with a lower running temperature. Weighting in at 20.5 grams the motor is ultra light weight to increase top speed and acceleration while improving the car’s handling at the same time.

Source: Scorpion [scorpionsystem.com]


June 27, 2014

Hitec X1 Pro charger & ePowerBox 17A power supply

Hitec X1 Pro charger & ePowerBox 17A power supply

Hitec introduce the X1 Pro DC/DC battery charger and ePowerBox 17A power supply. Starting with the charger, the multi-chemistry device delivers a powerful 180 watts with an adjustable charge current rate of 0.1 to 16A and a single output. The X1 Pro design includes docking capability with the ePowerBox 17A power supply upping its ante in convenience and portability. The efficient power supply converts 100 to 240VAC volts into 17A of continuous 13.8VDC power, making it compatible with a wide variety of DC chargers. Available as separate versatile units or as a cohesive combination.

Click here to view the specifications and more photos


June 24, 2014

NVision Factory Pro 5800 square LiPo battery pack

NVision Factory Pro 5800 square LiPo battery pack

NVision is the latest brand to introduce a square-type 2S LiPo battery pack. Build from high performance cells that are capable of 100C burst rates, the pack is ideal for all high-power applications. The special design mimics the dimensions of a side-by-side saddle pack battery but the single case does away with the need to use a jumper wire for charging and during use. The hardcase pack is equipped with a single 2mm connector tube for the balancer harness and dual 4mm tubes for the power wires and it is available now.

Source: nVision [nvisionweb.net]


June 24, 2014

Trinity introduce the D4 brushless motor

Trinity introduce the D4 brushless motor

Following much speculation about the follow-up motor of the successful D3.5, Trinity now officially introduce the D4 electric brushless motor. Designed to meet all ROAR specifications the motor is based around a new stator design and a 3-piece heatsink can with an updated endbell for improved bearing alignment and increased airflow for lower operating temperatures. Other features include windings made from certified pure copper wire, grade 5 ball bearings, and new larger silver-plated solder tabs. The motor is 8 grams lighter than the previous D3.5 and available as 2.5T to 9.5T modified and 13.5T and 17.5T ROAR Spec stock motors. The motors should hit stores by the time you read this.

Source: Trinity [trinityrc.com]


June 23, 2014

TrakPower 5800mAh square LiPo battery pack

TrakPower 5800mAh square LiPo battery pack

Hobbico introduce the TrakPower 5800mAh square LiPo battery pack. Build from 90C cells the battery mimics the dimensions of a side-by-side saddle battery pack making it ideal for many 2WD and 4WD trucks and buggies. The pack features a black-colour protective hardcase and 5mm bullet-type connector tubes. Includes come also a pre-wired balancer lead and bullet connectors.

Source: TrakPower [trakpowerusa.com]