Red RC » Electric

May 14, 2014

Tuning Haus charge accessories & mounting tape

Tuning Haus introduce several new products such as a pre-wired charge lead set, 4/5mm bullet connectors and two mounting tapes. Starting with the charge lead, the harness is designed for the use with the popular iCharger series, as well as many other chargers. The main leads are 460mm long and constructed from 10AWG silicone wire. The convenient double-sided bullet plugs allow convenient charging of packs with either 4mm or 5mm receptacles. The unused plug sides are covered with included rubber caps to safeguard against accidents. Balancing leads are configured for precision balance charging and the harness is finished with a mesh wire wrap to keep pit space work areas organised.

Click here to continue reading

May 14, 2014

Reedy 2S charge harness for 5mm connectors

Available now is this Reedy 2S charge harness for all 2S LiPo battery packs with 5mm bullet type connectors. The harness comes pre-assembled with 5mm gold-plated male plugs, and a JST-XH balancer connector. The 12AWG silicone wires can be equipped with a plug compatible to your favourite charger.

Source: Team Associated [rc10.com]

May 13, 2014

Intellect 6000mAh square LiPo battery pack

Designed to replace a standard 2S saddle pack with a single ‘square’ battery is this new 6000mAh 90C pack from Intellect. Eliminating the need for a connecting wire and reducing the number of internal connections, power output and efficiency are improved. 4mm sockets with access from both sides and a 2mm balance port allows users to balance charge the battery in the same manner as stick and shorty batteries.

Source: Schumacher [racing-cars.com]

May 8, 2014

Novak 4×4 SCT brushless system

Novak 4x4 SCT brushless system

Novak introduce a new budget brushless motor and speed controller combo for 4×4 short course trucks. Included is the proven 6.5T 3400kv Ballistic 550 brushless motor and the newly updated Crusher brushless speed controller. The ESC offers 2S to 4S operating range, a 5A BEC system, complete on-board programming, a sealed case, auto-detect LiPo cutoff, and ESC thermal protection. The sensored system is ideal for bashers, club racers and speed fanatics alike.

Source: Novak [teamnovak.com]

May 8, 2014

GForce PS1200 high output power supply

GForce introduce the PS1200 power 15-30VDC power supply. The high output device is usable with 100-240VAC input and offers a selectable output voltage of 15-30VDC with up to 50A current. Offering a full-blown 50A output and two 10A outputs the power supply also features two 5V/2.1A USB ports, a temperature controlled fan and several safety features such as over voltage and over temperature as well as reverse polarity protection.

Source: GForce [gforce-hobby.jp]

May 6, 2014

Muchmore Fleta ZX Modified 12mm & 12.8mm rotors

Muchmore Racing have two new rotors for the Fleta ZX Modified brushless motors available. First up is the super mild 12.0x5x25.3mm rotor that offers a mild power curve, ideal for 2WD and low-traction applications. The rotor comes with a grey marking ring and laser-etched size markings. The second new rotor is the larger diameter 12.8x5x25.3mm high power band offering. It comes with a blue marking ring and is ideal for all applications that require a high-torque motor such as 4WD buggies and touring cars.

Source: Muchmore [muchmoreracing.net]

May 5, 2014

ProTek Surpreme Power 100C square LiPo pack

A Main Hobbies introduce the 7.4V 5600mAh 100C square LiPo hardcase battery out of their Supreme Power series of high-performance packs. The “Square” style battery pack is an option for applications that use a side by side saddle pack setup, such as 2WD buggies and stadium trucks. When compared to a saddle pack, the square design eliminates the need for a jumper wire for increased efficiency, and at the same time cleans up the charging station by eliminating cluttered charging cables. The battery pack uses 5mm bullet connectors that can be accessed from either side of the case, allowing you to position the battery terminals in the direction that best suits your application. The battery is not yet ROAR approved, but uses the same hard plastic case that is required for use at ROAR sanctioned tracks and events.

Source: A Main Hobbies [amainhobbies.com]

April 28, 2014

Hobbywing Quicrun brushless motors & controllers

German Hobbywing distributors Hype introduce the Quicrun series of “sports” brushless motors and speed controllers. The controllers are developed to work with sensorless and sensored motors and are LiPo and NiMH battery compatible. There is also a waterproof line of controllers available and a port for an optional programming card makes adjusting the speedos to your likings easy. Available are a 30A 1/16th scale ESC, two 60A 1/10th controllers with and without sensor port, as well as a 150A 1/8th variant. As for the motors, Hobbywing comes with a 3800kv sensorless 1/10th scale and 2000kv sensorless 1/8th scale offering beside four 1760kv to 3450kv sensored 540-size motors.

Click here to view the other new speedos and motors