Red RC » Electric

July 24, 2013

Much More Fleta ZX optional modified & stock rotors

Much More Racing introduce a line of optional modified and stock racing rotors for the Fleta ZX series electric brushless motors. The colour-coded offerings allow the fine tuning of the motor’s characteristics by using different diameters in order to create high RPM or high torque motors with intermediate broad power band variants available also. The modified stators are 25.3mm of length and come in five variants from ‘high RPM’ 12.2mm up to ‘ultra high torque’ 13.5mm while the four 24.3mm long stock stators are ‘broad power band’ 12.3mm up to ‘ultra high torque’ 13.5mm parts.

Click here to view the stock rotors

July 24, 2013

Tekin Redline T8 Gen2 8th brushless motors

Tekin introduce the Redline T8 Gen2 brushless motors for 1/8th buggy and truggy kits. The latest generation of Tekin’s successful 1/8th off-road motors offer an optimised stack design and ultra-smooth powerband while featuring an updated 6061-T6 aluminium heatsink can design. Just like the previous line the 4-pole motors come as short can 4030 buggy and long can 4038 truggy motor with a wide range of windings from 1350kv to 2650kv available.

Click here to view the features and another photo

July 24, 2013

Reedy WolfPack 5500mAh 60C 7.4V LiPo Battery

New from Reedy comes the WolfPack 5500mAh 60C 2S LiPo hardcase pack. The battery is made from high-quality cells and targets the cost-oriented club racer who is after an affordable high performance pack. Sporting standard 139x47x25.1mm dimensions and 4mm sockets the battery comes in a protective hardcase, weights 301g and is ideal for both on-road and off-road racing.

Source: Reedy [teamassociated.com]

July 19, 2013

Tourex Power Switch & alloy servo bushings

German Tourex distributor RMV Deutschland introduce an electronic on/off switch called Power Switch and also aluminium servo bushings. Starting with the switch, the MCU controlled offering does away with the problems associated with conventional mechanical switches as it is housed in an enclosed case and therefore offers very good dust protection. The switch is best used in nitro vehicles and offers a NiMH and LiPo mode with the latter including a low-voltage protection. Upon arming a multi-colour LED also indicates the capacity left in the receiver battery. The switch comes pre-wired with JR-compatible connectors and two kinds of bottom covers. Also new are special aluminium bushings to replace the rubber servo grommets on steering and throttle servos. The machined parts sport a diameter of 3.7mm and an upper countersunk washer part while being gun metal anodised. The bushings come as 8-piece set and make for a rock-solid servo installation.

Click here to view the servo bushings

July 15, 2013

Much More LiPo battery for the CTXW tyre warmer

Designed for the CTXW tyre warmer is this 3S 4600mAh LiPo battery pack from Much More Racing. The internal power source allows the use of the tyre warmer unit without mains power making it possible to heat the tyres while waiting in the pits or the starting grid. The softcase pack comes build from 40C cells and is pre-wired with a Tamiya-style plug.

Click here to view another photo

July 13, 2013

Reedy Sonic 540 Mach 2 replacement stators

Reedy have additional replacement stators for their Mach 2 line of brushless motors available. New are a 13.5T and 17.5T stock stator that come marked and with heavy duty solder tabs. They are ideal to upgrade an existing motor instead of buying a complete one.

Source: Team Associated [rc10.com]

July 12, 2013

Gens Ace IMars2 DC multi-chemistry charger

New from Gens Ace comes the IMars2 DC multi-chemistry charger. Micro computer controlled and coming with a 32 digit backlit LCD display the device is able to charge and discharge 1S to 6S LiXX, 1 to 16 cell NiXX and 2V to 24V Pb batteries. The charger’s menu is controlled via four buttons and the 100W charge circuitry allows charging rates of up to 10A. The white case is equipped with an XH balancer port and 4mm output connector tubes while the software offers several charge modes and adjustable LiXX cell voltage settings.

Source: Gens Ace [gensace.com]

July 10, 2013

Much More Power Master Mini Evo

Much More introduce this compact power supply called the Power Master Mini Evo. It offers up to 10A of constant current, features an adjustable output voltage of 12.2V to 14.0V and an 5V/1A USB charging port. The device measures only 160x70x45mm, weights 377g and is equipped with a single cooling fan, new output terminals and overload, short circuit and overheat protection. Available in black or blue colour it is ideal to power chargers, tyre warmers, pit lamps and many more.

Click here to view another photo