November 27, 2012

Speedzone Peerless Series BL motor line

Speedzone “Peerless” Series BL motor line comes in a variety of turns and is built with the highest quality and tolerance. Engineered for 1/12 and 1/10 scale R/C vehicles, the motors are available in standard 540 and 550 sizes. The 550 versions are specifically designed for the Short Course 4WD class. And with the growing popularity of SC, Speedzone also has a 2wd Short Course Edition in the 540 line-up. Motors are bench tested to ensure sensor, stator and dual precision bearing seating are all functioning to a strict quality control. The Peerless design features symmetrical vent openings, which in conjunction with the case and stator structure reduces the motor temperature and maximizes efficiency during an operating cycle. The end result is a stronger motor carrying the maximum torque and rpm with less fade during a race, all contributing factors to a longer life span for the motor.

View more images & details here


November 20, 2012

LRP 4500mAh 40C/80C 11.1V pack

A new VTEC Competition Car Line 3S battery is ready, the 4500mAh 40C/80C 11.1V. It features higher C-rate for more power and higher capacity for longer run times. This is achieved through the use of even better, thinner and more efficient cells. The latest materials and an optimised electrolyte make the high-end battery ready for the use in 1/10 onroad and offroad cars.

Source: LRP [lrp.cc]


November 20, 2012

Elangears Elan-R compact charger

Elangears have released the follow up to their EL-01D compact charger with the release of the Elan-R. The updated device sports a clearer orange LCD screen and more power. Powered by DC 11V – 16V it now has a charging output of 0.1 to 15A and a discharge current of 0.1 to 7A making it a significant update on the previous version.

View another image of the Elan-R here


November 20, 2012

Team Orion Vortex R10 Stock

Racers were asking for a stock version of Team Orion’s successful Vortex R10 Pro speed controller and the Vortex R10 Stock is the result. Now you can squeeze the extra power out of your stock racing motors, while keeping total control with the awesome throttle and brake feeling of their US National winning ESC software. The R10 Stock has been factory programmed with the 0° timing software, which is optimized to give the best possible performance when using 0° timing.

Source: Team Orion [teamorion.com]


November 17, 2012

Hitec H4 DC/DC multicharger

Hitec announce their new H4 four port DC multicharger. Housed in a sleek aluminium case with backlit graphic display and four computer controlled 120W ports the charge can make use of NiMH, LiXX and Pb batteries. The 8A independent ports can also be paired into two 240W outputs for even more charging power. The charger sports the usual line of safety features, is upgradable with the latest firmware and PC-interface capable using Hitec’s own HPP-22 PC interface.

Source: Hitec [hitecrcd.com]


November 17, 2012

S-ePower Electrical Switch

The S-ePower Electrical Switch is an electronic on/off switch with build-in LiPo battery low-voltage cut off to protect receiver batteries from damage. It features an integrated battery indicator, large power switch and dimensions of 39.2×17.5×9.5mm and weights 11g. The switch is useable in a voltage range of 5V to 10V and is able to handle a peak current of 14A. Designed by Japanese company KO Propo it is a direct for the S-Workz S350 PSP radio tray and also fits many other vehicles.

Source: S-Workz [sworkz.com]


November 14, 2012

Hitec X1 MF charger

The Hitec X1 MF is a multi-chemistry charger with a single 80 watts charging port for charging rates up to 10 ampere. The beefed-up brother to the X1 AC Plus sports a rotary dial design for intuitive menu navigation and easy operation. Its features include a built-in balancer, motor RPM and servo tester. The universal balancing board supports most batteries on the market. Upgradeable firmware ensures you can keep it up to date as battery technologies evolve.

Source: Hitec [hitecrcd.com]


November 13, 2012

Hitec ePowerBox 30 AC power supply

The Hitec ePowerBox 30 is a 30A AC power supply designed to provide DC chargers with an adjustable output of 12 to 18VDC and a peak current of 30A. Powered by 100 to 240VDC the power supply features a backlit LC display, dual 4mm output jacks and a fan unit for temperature control as well as a black heatsink case.

Source: Hitec [hitecrcd.com]