January 19, 2010

CRC Maxxcell 5200mAh 1S LiPo pack

CRC Maxxcell 5200mAh 1S LiPo pack

CRC have entered the battery market with their new Maxxcell line of LiPo racing batteries. Featuring a low profile terminal design, convenient 4mm bullet tubes (photo shows prototype), low internal resistance (IR), high average discharge voltage and long run time, the Maxxcell LiPo is a proven winner. The 50C peak discharge rates deliver the punch, while a true 5200mAh delivers the run time. The 4mm tubes and bullet connectors closely replicate the solder tabs most every racer has used for years. Wired batteries with connectors are inconvenient and difficult to use as each manufacturer uses different placement, wire lengths and connectors, plus space is tight in most 1:12th road racers, all that wire and connector bulk takes up valuable room. With the bullet connectors, the wiring is much cleaner, efficient and lightweight. The pack is ROAR legal and is built to fall within the rules of IFMAR, EFRA, BRCA and ROAR.

Source: CRC [teamcrc.com]


January 18, 2010

Speed Power 3.7V 5500mAh 45C LiPo pack

Speed Power 3.7V 5500mAh 45C LiPo pack

Speed Power have released this 1 cell 5500mAh racing LiPo battery, perfect for 1/12th scale racing. This hard case 3.7V pack features a discharge rate of 45C, weighs in at 151 grams and comes supplied with a Deans plug connector. EFRA and ROAR approval pending.

Source: Speed Power [speedpowerrc.com]


January 18, 2010

Speed Passion Ultra high active power connectors

Speed Passion Ultra high active power connectors

Speed Passion have introduced two new 5mm ultra high active power connectors. Featuring a special design, that is non reversible and has a clamping system to prevent them coming apart, these high performance racing connectors are available in 2P versions for battery connectors and 3P for brushless motor connectors.

Click here for more connector images


January 18, 2010

Vampire Racing 4400mAh 40C LiPo saddle pack

Vampire Racing 4400mAh 40C LiPo saddle pack

Vampire Racing have announced that their 4400mAh LiPo saddle pack, which was the most used battery type at the 2009 EFRA European Championships in Bilbao/Spain, has been updated. To provide you with better performance and even more power the discharge rate of this pack is now 40C instead of 30C. Available now from Vampire Racing dealers.

Source: Vampire Racing [vampire-racing.com]


January 16, 2010

Speedzone 5000mAH Pro 50C 1S Lipo

Speedzone 5000mAH Pro 50C 1S Lipo

Speedzone have released their first 1S 3.7v Straight LiPo Pack. The 5000mAh pro series packs have a 50C rating and a maximum charge rate of 5C, come with high performance 4mm bullet connectors and will ship with Speedzone battery rails/guides. The purpose of the battery rails is to help maintain the position of the battery pack in the car. Packs are ROAR approved and will fit all popular 1/12 scale link cars and WGT cars and come with a 60-day manufacturing warranty and a 6-Month ‘No Questions Asked’ warranty.

Click here to view an image of the battery mounted


January 14, 2010

Speed Passion Cirtix Slotless sensored BL motors

Speed Passion Cirtix Slotless sensored BL motors

Speed Passion have introduced their ‘revolutionary’ Cirtix series of 1/10th and 1/8th scale slotless sensored brushless motors. Bridging the gap between the raw power and high efficiency of a slotless motor design, and the zero cogging smooth low end of a sensored system. The best of both worlds is now here for any mod 1/10th offroad or onroad vehicle, or 1/8th buggy and truggy. The Cirtix motor series features all the incredible power and efficiency of a slotless motor design, which means more power, longer run time and less motor heat in any mod 1/10th application, as well as stronger and smoother braking. These efficiency gains no longer have to come at the expense of common sensorless ESC cogging at startup and low speeds, as the Cirtix motors are the first slotless motors compatible with any sensored ESC. When combined with Speed Passion’s newly redesigned sensored 1/8th scale ESC, the Cirtix 1/8th scale motors provide all the brutal horsepower needed in any 1/8th scale application, as well as the accuracy and control of a cog-free sensored system. Both of these new motor lines are built to ROAR legal specs, and approvals are pending at this time.

Click here for more images of the new motors


January 14, 2010

Much More Hybrid balance charger & discharger

Much More Hybrid balance charger & discharger

Much More have released their new Hybrid balance charger & discharger. This microprocessor controlled AC/DC system features a super compact design and special blue LCD screen. A 5 amp charge current and 1 amp discharge system, a built in voltage balancer and real time individual monitoring ensure optimum handling of Lithium cells. This unit can handle all the usual cells including NiCd, NiMh, LiLo, LiPo and LiFe and has a maximum charge and discharge of 50 watts. Available in black, blue and grey.

Source: Much More [much-more.co.kr]


January 14, 2010

IB LiPo line up for 2010

IB LiPo line up for 2010

Team Epic are showing off the new for 2010 LiPo cells from IB. The new standard configuration packs are now able to boast a true 50C rating and will come in 5600mAh and 5000mAh versions. For cars that require saddle packs, as well as 1/12th scale using one 1 cell, IB now offers new smaller sized packs that come in 5200mAh with 45C and 5000mAh with 35C.

Click here to see the other packs