Red RC » Electric

April 16, 2009

Robitronic EFRA & BRCA legal LiPo packs

Robitronic have announced the release of their range of EFRA and BRCA legal LiPo packs. The packs are delivered in a durable hard case for maximum safety in the event of a crash and come in standard and saddle pack configurations. Clearly marked 4mm gold connectors and 2mm balancer-connector they are supplied with 10 cm long, super flexible 3,5mm² heat-resistant silicon-cables for easy connection. The saddle packs are available in 5000mAh with a 25C rating and 4600mAh with a 35C rating while the standard racing packs come in 5000mAh with both a 35C or 40C rating.

Click here to see the other packs

April 15, 2009

CS Factory Pro 4000mAh LiPo saddle pack

CS Electronic have released their Factory Professional 4000mAh LiPo saddle pack. Using high quality cells, this pack has a discharge rate of 35C, giving plenty of run time and power for all applications. Mounted in hard cases with 4mm gold connectors, these Korean produced cells correspond to EFRA regulations and are supplied with cables with 4mm connectors pre mounted as well as balance connector with 2mm gold contact.

Click here for more photos

April 11, 2009

Reedy LiPo charging sack

Reedy have released their LiPo charging sack which reduces the risk of damage in the case of a LiPo battery fire during the charging process. Constructed using heat and fire-resistant material, the charging sack is conveniently sized at 20cm x 22cm (7 ⅞” x 8 ⅝”) to accept typical 2S-4S car packs. Due to its flexible fabric, the sack can be folded for easy transport and storage, plus, inserting and removing the battery is easy thanks to its hook and loop closure design.

Source: Reedy [rc10.com]

April 10, 2009

Xceed C1 Charge & PDC-1 Power block

Xceed have released two new additions to their electronics range with the C1 Charger and PDC-1 power block. The high end C1 charger handles NiMh, NiCd, LiPo and Li-Ion with 3 different charging modes, peak charge, step charge and flex charge at 0.1A to 10A charging current. Discharging is also possible from 0.1A to 20A and additionally the charger has a USB port for charging your entertainment devices as well being supplied with LiPo balancer port. The simple to use interface is displayed on a 2 line back-lit screen and is controlled by 4 top mounted buttons. Also new is the PDC-1 which allows you to attach up to 5 devices to your power-supply. Each socket is secured with its own fuse and the socket will glow up with a colored light to show its in action, and four of the outputs have their own on-off switch as well.

Click here to see the PDC-1

April 8, 2009

Tekno RC Lektron Series BL motors

Tekno RC have announced the release of their World class line up of brushless square can motors. The Lektron Series has been in testing for the last few month and have proved to be a success. The lighter and more efficient design makes these motors have the highest output from the smallest package. Available in 2200kv, 1800kv and 1500kv and are perfect for use in 1/8th scale buggies.

Source: Tekno RC [teknorc.com]

April 6, 2009

CS Electronic Mega RX pack

CS Electronic have released this Mega receiver pack for use in large scale vehicles. Configured as a hump pack, this 6.0V battery supplies 5000mAh of power, enough to easily drive the electronics in your 1/5th or 1/6th scale car during a long final. Comes supplied with BEC Flex silicone cables and a pre mounted Tamiya connector.

Source: CS Electronic [cs-shop.de]

April 4, 2009

Losi Intelligent LiPo Balancer

Losi have released this simple plug n’ balance designed 2-6 Cell Intelligent LiPo Balancer, which offers the perfect way to protect, maximize the performance and extend the life cycles of your LiPo batteries. It includes automatic cell count detection and confirms each cell condition by displaying the actual voltage of individual cells. It is supplied with three adapter styles that are compatible with Losi, Thunder Power and E-flite brands and can be used in conjunction with a LiPo balance charger or independently with a LiPo battery only.

Source: Losi [losi.com]

April 2, 2009

LRP Fusion “2009” Micro Modified motor

LRP is releasing a new range of high performance brushed motors, specially developed for micro cars. LRP XTEC engineers have designed a micro modified motor, using all its experience from the big 540 size motors to power your micro model. Fully re-buildable 370 size design, this micro modified motor combines all features current 1/10 modified motors are equipped with, including high-end materials. The Fusion “2009” Micro Modified 370 motor also features a unique mounting system, which allows a simple installation into your car with M3 (17mm) and M2.5 (14.0mm) screws.

Click here to see the full feature list