Red RC » Electric

December 13, 2019

Donathen RC custom sensor wires

Donathen RC have introduced their new custom sensor wires, fully sheathed offerings that can be customised with more than 20 sleeve and six heat shrink colours. The wires feature reinforced high-quality black colour connectors, black colour high-flex silicone wire, and they are available in sizes of 50mm up to 275mm. Due to the tubed-design they are extremely usable for heavy duty off-road applications where the sheathing prevents dirt, stones or rotating parts from harming the delicate wires. The sensor wires are also available as “Wolf Style” extra reinforced or regular variants.

View another image here

December 13, 2019

Rêve D 7.4V 3700mAh shorty LiPo battery pack

Rêve D have announced the soon release of their new 7.4V LiPo short battery pack. Built from high-quality 100C cells the lightweight 3700mAh battery is ideal for all applications that require a low weight with the 3700mAh capacity still allowing for good run times. The low-profile hardcase pack weighs in at 156g, it measures 93×46.5×18.5mm and it is equipped with 4mm connector tubes and an industry standard 2mm balance connector. While being intended for drift car racing, the pack can also be used for formula, pan car and off-road buggy racing.

Source: Rêve D [teamreved.com]

December 13, 2019

Revtech X-Factor modified motors

Trinity have introduced the new Revtech X-Factor modified brushless motors in a range of 3.0T to 9.5T windings. The power plants utilise a highly machined aluminium case for exceptional heat dissipation and this, in combination with highest quality materials, gives virtually zero fade during a run. New and improved solder tabs now make wiring even easier. A huge variety of optional roots such as 12.3mm long, 12.5mm long, 11.5mm, 12mm, 12.5mm and 13mm allows to tune to power to the drivers preference. The motor is available in 3.0T up to 7.5T windings in even and .5 variants and also as 8.5T and 9.5T versions.

View more images here

December 12, 2019

Yokomo Racing Performer 3.5mm motor connectors

Coming from Yokomo’s Racing Performer series are new heavy-duty 3.5mm motor connectors. The female tube-style connectors are of a hexagonal design which makes soldering a lot easier while the “heatsink” design allows for improved motor terminal cooling. The european-style bullet-type male connectors can be used for straight for 90 degrees angled soldering, allowing for more wire routing options. The connectors are of a heavy-duty design meaning they are less prone to unplug even in the event of a crash and they are available as 6-piece tube and plug set or as 3-piece tube set.

View more images here

December 10, 2019

Maclan Racing 2020 Graphene V3 LiPo batteries

Coming from Maclan Racing are their new 2020 Graphene V3 LiPo batteries. The series offers different dimension profiles for both on and off-road with new ULCG case design packs of 19.5mm height for competitive on-road racing and an all-new 20mm height shorty for off-road competitions. All packs offer improved cell formulas with better weight/capacity ratio over the previous versions and available will be standard packs of 8500mAh (25.1mm/318g), 6800mAh (22.5mm/270g) and 5500mAh (19.5mm/230g). As for the shorty packs, these come as 6100mAh (25.1mm/225g), 4500mAh (20mm/165g) and 4000mAh (18.5mm/155g) variants. All are built using high-performance LiHV cells for a lower internal resistance, further improved overall performance and even greater durability.

View the standard and shorty battery packs in comparison here

December 9, 2019

Yokomo YZ-114 Plus AC/DC charger

Coming soon from Yokomo is their new YZ-114 Plus AC/DC charger. With its 100W charge circuitry the device is good for charge currents of up to 12A while being compact in size, taking only a small amount of pit space. The charger offers several charge modes including balance, fast and storage charging, it incorporates a 5V/2.1A USB output and is future-ready thanks to an LiHV charge mode for the latest generation of LiPo cells. Monitoring the battery’s vital signs is made easy thanks to the back-lit display.

View a list of the specifications here

December 6, 2019

LapMonitor introduce new waterproof transponder

LapMonitor have introduced a new transponder for its popular lap counting system. The new variant is fully compatible with the LapMonitor decoder and it can be used with up to 96 cars on the same track. The transponder is now water resistant and weights only 5g for the Molex connector version and 7g for the variant with a universal receiver plug.

View the Molex connector variant here

December 6, 2019

RC Maker 3D Pro ESC wire organiser

RC Maker have introduced their new ESC wire organiser for the use with most brushless electronic speed controllers. Wiring is difficult, especially on the new mid motor chassis with the ESC behind the motor. The belt is in the way and there really isn’t much room. That is why the designers have gone and made it a whole lot easier for the drivers. 3-D-printed from high quality composite material, the wire organiser keeps all three motor wires, plus the sensor wire bunched together, and stuck down. The part is also very useful for keeping the wires organised in 1/12th on-road, and 1/10th off-road chassis and it accepts any wires, 12 gauge or smaller, and all sensor wires, flat or bunched. The organisers is usable floating or taped down using optional double sided tape.

View more images here