January 29, 2018

ORCA Generation 4 Graphene LiHV battery packs

ORCA have introduced their new Generation 4 Graphene LiHV high-voltage Lithium-Polymer battery packs for a range of competition applications. Available are a 8500mAh standard size pack, two 6300mAh and 5500mAh standard length low centre of gravity batteries, as well as a 5400mAh shorty and a 8500mAh 1S pan car pack. All 2S packs feature through-type cases so they can be accessed from either side or stacked for multi-pack applications and the batteries are built using ORCA’s 4th generation Graphene cells for improved performance and exceptional durability.

View the other new battery packs here


January 27, 2018

Dash AI Series program card

Dash have introduced a dedicated programming card for the AI Pro competition brushless speed controller. The box allows to easily fine-tune the speedo’ software settings without the need for an additional PC

Source: Dash [dash-rc.com]


January 26, 2018

Reds Racing VX2 540-size brushless motor

Reds Racing have introduced their new VX2 540-size brushless motor line. With a new low internal resistance design the motor offers improved performance and efficiency while the new high airflow can enhances cooling efficiency by 20 percent compared to the 1st generation motor. The new high power stator does away with a separate insulator which reduces weight and improves cooling while pure copper wires and low resistance collector rings guarantee a maximum in power and RPM. The motor complies with IFMAR, ROAR, BRCA and JMRCA rules and it is available in 5.5T to 8.5T modified as well as 10.5T, 13.5T, 17.5T, 21.5T and 25.5T stock windings.

View the features and more images here


January 26, 2018

Muchmore Fleta ZX V2 Specter outlaw stock motor

Muchmore have introduced their new Fleta ZX V2 Specter brushless outlaw stock motor. It builds on the proven ZX V2 setup but features a special short stack stator for reduced internal resistance and a sintered rotor with the combination of both being good for up to 35 percent more power output compared to traditional stock motors while delivering a maximum in terms of RPM and torque. In addition the 12.3×5.0×24.2Z MR-FZR27TiZ rotor with titanium shaft makes for a lower rotation mass, resulting in razor-sharp throttle response. Other features include Grade 5 ball bearings, an aluminium endplate for improved heat dissipation as well as silver-plated solder tabs. The motor does not comply with ROAR and EFRA rules and is available in 13.5T, 17.5T and 21.5T windings.

View the Ti rotor here


January 26, 2018

Team Orion Ultimate Graphene LiPo & LiHV batteries

Coming from Team Orion are their new Ultimate Graphene LiPo and LiHV battery packs. Marking the pinnacle of development, the new packs offer an ultra low internal resistance, improved capacity, as well as reliable and stable power supply from start to finish. The Ultimate Graphene LiPo range includes two families of batteries, the standard voltage Ultimate Graphene LiPo and the high voltage Ultimate Graphene LiPo HV packs. The new batteries are available in all popular formats, shorty, LCG shorty, stick as well as 4S block for 1/8. All are built to meet ROAR, EFRA, BRCA, and IFMAR specifications, they utilise 120C cells and heavy duty gold-plated connectors.

Source: Team Orion [teamorion.com]


January 25, 2018

Revtech 6750mAh 15.2V LiHV battery pack

Coming from Trinity is the new Revtech 6750mAh 4S 15.2V LiHV hardcase battery pack. It is made using high-quality 110C Graphene high-voltage LiPo cells for low internal resistance and improved power output and the pack’s dimensions allow to use the battery in all applications that require a standard 4S pack. The battery will become available by mid-February and it comes pre-wired with an XT90U connector.

Source: Trinity [teamtrinity.com]


January 24, 2018

Trinity Monster Fan 30mm cooling fan

Trinity have introduced their Monster Fan 30x30mm high-speed cooling fan. It weighs in at 7.7g, is usable with 6V to 8.4V input and offers up to 24,000RPM at 8.4V input for loads of cooling capability for speed controller and fans. The unit comes pre-wired with a red BEC-style connector and including a black extension lead.

Source: Trinity [teamtrinity.com]


January 24, 2018

HRC Racing 6S hardcase LiPo battery pack

HRC Distribution have introduce the HRC Racing brand 6S hardcase LiPo battery pack for 1/8th scale applications. The pack is of the same 138x48x47mm dimension as most 4S packs, allowing to put more power into 1/8th buggies, trucks and monster trucks without having to upgrade the battery compartment. The battery is made of high-quality 4900mAh 60C/110C cells and it comes pre-wired with an industry-standard balancer port and a T-type power connector.

Source: HRC Distribution [hrcdistribution.com]