December 20, 2017

ProTek Graphene LiHV & lightweight RX battery packs

AMain Hobbies have introduced two new Silicone Graphene LiHV battery packs as well as a lightweight LiPo receiver battery. Starting with the LiHV packs, first up is the 2S 7.6V 100C Silicone Graphene LCG pack with a capacity of 5600mAh. It measures 138.5×46.5×22.5mm, weighs in at 245g and comes in handy in all applications that require a medium capacity and lightweight battery. The hardcore battery utilises 5mm bullet-type power connectors and a standard 2mm balancer tube.

Continue reading here


December 19, 2017

EcoPower Electron 2S 800mAh LiPo receiver battery

AMain have expanded their range of EcoPower Electron LiPo battery packs by several softcase variants. Usable for RC car applications is the 2S 7.4V 800mAh 25C pack with JST connector that will make a lightweight receiver battery in many nitro applications. The pack measures 30×56.5x15mm an weighs in at 47g. An XH balancer port makes for safe recharging. The whole range including the many all-new packs can be found here.

Source: AMain [amainhobbies.com]


December 19, 2017

KO Propo Advantage Capacitor C module

Coming from KO Propo is their new Advantage Capacitor C module for the use with high-performance brushless speed controllers and modified motors. The capacitor module will improve overall motor power and torque especially in the second half of a run when the battery is starting to fade, resulting in better lap times and more consistency. The capacitor module is especially recommended for the use with modified motors, it fits virtually every 1/12th and 1/10th competition brushless speed controller and it is also usable with Stock motors, however KO Propo have a dedicated spec racing capacitor range available that can be discovered here.

Source: KO Propo [kopropo.co.jp]


December 15, 2017

LRP Competition Car Line 2018 LiHV batteries

LRP have introduced their 2018 Competition Car Line series of LiHV battery packs. All are made using the new Graphene-2 high-voltage 120C/60C cells for improved power output, a lower weight and improved cell life when charged to the standard 4.2V cut-off voltage. The hardcase packs utilise 5mm bullet-type connectors and they are available in several configurations including the 8000mAh TC Stock Spec, 6400mAh TC LCG Stock Spec and 6000mAh 112.5mm long Mid Shorty pack. Also new are the 5800mAh Stock Spec Shorty, the 4600mAh 25.1mm Light Shorty Stock Spec and 4200mAh 22.5mm Real Shorty batteryies. The range is rounded out by the 8000mAh 1/12th Ultra LCG 1S pack and the 6200mAh 1/12th Ultra LCG Stock Spec battery.

Source: LRP [lrp.cc]


December 14, 2017

Muchmore professional circle laser infrared thermometer

Muchmore have introduced a professional circle laser infrared thermometer. The compact device measures only 150x25x27mm and it weighs 54g without battery. It offers a measuring range of -33°C up to 500°C, it sports a backlit display and its 9:1 optical range circular laser pointer allows for precise temperature measurement of parts such as motor and engines, batteries, speed controllers, tyres and more.

View another image here


December 13, 2017

Reedy S-Plus competition spec class motors

Coming from Reedy are the new S-Plus competition spec class electric brushless motors. The heart of the S-Plus is a thin leg stator that allows shorter wire lengths, resulting in great reduction in resistance. The thin-leg stator also reduces the motor’s weight, as handling and chassis turning flexibility improves. Machined parts such as the can, timing cap, back plate, and sensor assembly have been placed on a diet. An entire section of the front plate has been removed to reduce weight with an added benefit of allowing the user to re-position it to lower CG depending on which type of car it is being installed in. A savings of nearly 30g has been achieved. Additionally, the motor’s length has been reduced by more than 2mm, which aids left/right balance and moves mass towards the centre of the chassis. An all-new high-strength, balanced rotor is more powerful that its predecessor. Because the rotor is interchangeable with those in 540-M3 spec motors, a wide range of tuning options are already available. Precision stainless steel ball bearings have been fitted to accommodate high RPM loads with exceptional efficiency and reliability. Three versions, 21.5, 17.5, and 13.5, are available with more versions to follow.

View the features and another image here


December 13, 2017

Maclan Racing Race Formula Graphene LiHV batteries

Maclan Racing have announced their all-new Race Formula Graphene LiHV battery packs. These new 2018 chemistry Graphene packs provide lower weight with better discharge curves. The 120C batteries also offer lower operating temperatures, lower internal resistance, better run time, increased cycle life and voltage. Available are a 8500mAh standard-size pack, a 6400mAh standard size LCG pack, a 6000mAh shorty and a 3600mAh LCG shorty pack all of which allow fro 10C maximum charge rates, and they are constructed using 5mm connector tubes.

View the other battery packs here


December 13, 2017

Trinity Monster Max Killer Orange end plate kit

Trinity have introduced their limited edition Monster Max Killer Orange end plate kit as a direct replacement for the Monster Max or the Monster Horsepower motor. The set is limited to 100 pieces and includes a sensor side end plate, pinion side end plate with bearing as well as the sensor board cover plate. The parts are only available as set and not separately.

Source: Trinity [teamtrinity.com]