March 19, 2011

Cactus Classic Friday qualifying report

Fri-MaifieldAction

What an epic day of qualifying! 48 heats twice through, started at 8am and ended at 10:30PM. Round 1 of the 25th annual Cactus Classic is saw Team Associated’s Ryan Maifield dominating the field. With his home track advantage and his cars looking stellar around the track, he finished with TQ’s in 2wd Modified Buggy, 4wd Modified Buggy, and Pro-2 Short Course.  Ryan had some minor motor issues in Pro-4 SC but otherwise would have likely TQ’ed that as well. I asked him what the plan for round 2 is and if he is going to change anything up. He said, “Everything is working really good today. I’m going to put a new motor in the SC-10 4×4 and hopefully have a better run.”

Continue reading the report here


March 18, 2011

Day 1 in Poland belongs to Hagberg

Day 1 in Poland belongs to Hagberg

The opening day of the Polish ETS encounter was very much an Alexander Hagberg affair with the Swedish ace ending the day at the top of the time sheets.  The factory Xray driver improved with every outing and setting the fastest lap of the day in the fifth & final practice and will now carry No.1 on his LRP powered T3’11 in the top heat for the four rounds of qualifying that make up tomorrow’s schedule at Arena Legionowo.

View our complete event coverage here.


March 18, 2011

Hagberg sets early practice pace in ETS Poland

Hagberg sets early practice pace in ETS Poland

The Yokomo Euro Touring Series has arrived in Poland for round 4 of the 2010/11 Series and setting the early pace in the impressive new Arena Legionwo building is Team Xray’s Alexander Hagberg. With three rounds of free practice complete, the 21-year-old Swede heads championship leader Ronald Volker by an impressive margin of over 1/10th of a second while the next three drivers are separated by just 2/1000ths.

View our complete event coverage here.


March 18, 2011

2011 Cactus Classic – Thursday update

2011 Cactus Classic - Thursday update

The 2011 Cactus Classic is taking place this weekend at the Scottsdale RC Speedway in Arizona, USA. This annual electric race attracts top drivers from around the world and this, its 25th year, is no exception with top Europeans such as Lee Martin, Hupo Honigl, Joern Neumann, Marc Rheinard and Viktor Wilck joining the top US stars to battle it out for this year’s titles in 4wd, 2wd, SC and Truck. With 430 entries, making 48 heats it is making for a long day for everyone and the blazing heat is also taking its toll. Open practice has been underway since Wednesday and the drivers are closing in on their final race setups ahead of Friday’s first 2 rounds of qualifying. Red RC will be reporting from the event throughout qualifying through to Sunday’s A-mains so stay tuned.

View Thursday’s image gallery and Short Course video here


March 17, 2011

Losi reports from 2011 JBRL Electric Series Rd1

Losi reports from 2011 JBRL Electric Series Rd1

This past weekend Southern California racers gathered at Hot Rod Hobbies for the first round of the 2011 JBRL Electric Series and Losi sent us this report. As always, round 1 has a large turnout and this year was no different with 280 entries spread throughout the various classes. With TLR being the headline sponsor for this year’s series, many local team drivers were in attendance. In qualifying Losi Project Manager Keith Whisler set the TQ’s in both Sportsman Stock Buggy and Sportsman Stock Truck. In Modified Buggy, TLR Team Driver and Project Manager Frank Root took the TQ over a field of world class drivers. Root was running the new TLR 22 in mid motor configuration in preparation for the upcoming Cactus Classic. In the Sportsman mains Whisler took advantage of both his TQ positions and completed the sweep of both classes. To take the wins, Whisler used Xcelorin ESC’s and batteries, the Spektrum DX3R, and Losi tires in his TLR vehicles. In Pro 2, Losi finished with 3 XXX-SCT’s in the top five. In a very close race with several position changes, TLR Team Driver Casper finished with 3rd place, TLR Team Manager Kevin Gahan in 4th and Losi Project Manager Ryan Dunford rounding out the top five. In Pro 4, TLR Team Driver Mike Truhe finished 2nd driving the new Losi TEN-SCTE. Fellow Team Driver Aaron Lane fought hard through the entire race to finish 4th with his TEN-SCTE. Round 2 of the TLR sponsored JBRL will be at OC/RC on April 2nd, 2011.

Source: TLR [tlracing.com]


March 17, 2011

Stephane Bouche wins French season opener

Stephane Bouche wins French National season opener

The first round of the French 1/8th scale on road championship took place in Toulouse last weekend. During qualifying the track was wet and making the best of those conditions was Motonica/Vox driver Sebastien Zatla who took TQ in front of Shepherd/GiMar driver Richard Volta and Motonica/Max driver Stéphane Bouche. In the final Richard Volta took the lead in the first laps, but after a few minutes it was young talented driver Arnaud Mathieu who took the lead only to run out of fuel. One minute before the end of the the race, it was Volta in the lead by 2 seconds from Stephane Bouche with his Motonica team mate Jerome Papaconstantinos in third. All drivers were pushing hard after 44 minutes of racing when Volta made a mistake at the end of the straight allowing Stephane Bouche to the front and take the win on his debut race with the new Motonica P81 RS. Richard Volta recovered to take 2nd and Jerome Papaconstantinos took 3rd.

Source: Andelle Competition [sasandelle.free.fr]


March 16, 2011

Cavalieri leads Associated’s challenge at EOS pilot event

Cavalieri to head Associated’s challenge at EOS pilot event

Two time World Champion Ryan Cavalieri is to contest the ‘Euro Offroad Series’ pilot race with Team Associated confirming that one of the biggest names in off road racing will travel to Sweden for the April 1-3 event. The 24-year-old reigning 4WD US National Champion will team up with former European Champion Peter Pinisch and Petit RC Race winner Paul Bradby as part of the Team Associated challenge in Tomelilla where they will go head to head with official team entries from Losi, Tamiya and Team Durango.  Last week Team Losi Racing confirmed 2011 Reedy International Race of Champions winner Dustin Evans will make the trip from Colorado to contest the indoor clay event. Commenting on the latest big name driver announcement, EOS Race Director Scotty Ernst said:

We are so excited that Team Associated are sending Cavalieri to our pilot event and together with Losi confirming Dustin Evans’ entry it is a massive endorsement for the EOS and what we are trying to create for 1:10 Off Road in Europe.  The quality of the entry is going to make for great racing and with most of the top guys also doing Short Course Truck I think we can really showcase this class which back in the US has done great things for our hobby.

Read the full release here


March 16, 2011

ETS Rd4 participants to collect Hudy 3.0mm Allen wrench

ETS Rd4 participants to collect Hudy 3.0mm Allen wrench

With the fourth round of the Yokomo Euro Touring Series taking place this weekend in Poland, event sponsor Hudy have been in touch to remind entrants that they can once again collect their free Limited edition tool, which this week will be a 3.0mm Allen wrench. Given to Pro Stock and Hobby drivers competing in Europe’s largest racing series, the Slovakian company has already handed out their 1.5mm, 2.0mm and 2.5mm wrenches at the previous 3 rounds. Part of their 25 Years Anniversary limited edition series the tools feature super-lightweight CNC-machined Swiss 7075 T6 aluminium handles that reduce weight by 30% as well as a diamond-pattern surface for unsurpassed grip. The new generation of Hudy tips is hand-made from special world-renowned, top-secret, self-developed Hudy Spring Steel, individually precision-ground, sized and shaped for perfect fit with fasteners and the unique hardening processes make the tips ultra-durable. Each tool includes a press-fit protective black cap in the handle end; optional color-coded plastic caps (violet, red, blue) are available to customize the tools to your preferences. A laser-engraved ETS logo is the finishing touch.

Source: Hudy [hudy.net]