December 13, 2019

RPM X-Maxx shock shaft guards orange

RPM have announced the release of select Traxxas X-Maxx option parts in orange colour. First up are the shock shaft guards for the popular Traxxas truck. Rocks, dirt and debris striking the shock shafts lead to dents, dings and burrs, which, in turn, lead to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. The shock shaft guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between seal replacement and shock rebuilds. The guards are a simple design, replacing stock shock spring cups with ones that have mounting holes for a thin but tough shield that rises up to the base of the shock body. The guard completely blocks debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. As an added bonus, RPM increased the length of the tubular spring support of the spring cup by nearly 2mm. The added length helps prevent the spring from jumping off of the spring perch when the conditions are less than ideal. The guards are sold in pairs with two packs being needed to outfit a complete truck.

View another image here


December 13, 2019

Yeah Racing 15mm offset aluminium hex adapters

Coming from Yeah Racing and made for many of today’s 1/10th scale crawlers are 15mm offset aluminium hex wheel adapters. The parts allow to easily widen the track width of a truck which can lead to a more stable ride in challenging terrain. Machined from aluminium the black anodised hex adapters are usable with 12mm hex wheels and they come in sets of four including suitable wheel screws.

Source: Yeah Racing [yeahracing.com]


December 13, 2019

Xray Racing Series Slovenia Rd2 – Report

Round 2 of the Xray Racing Series Slovenia was held at the Genius Ring recently and in 13.5T Touring it was a fight between round 1 winner Nejc Mihelic and Italy’s Mattia Collavo. In the end Nejc managed to stay on top for another TQ while in the 21.5T Formula class it was Herfried Pucher who took the TQ without any problems, since main rival Matej Dobnikar could not attend this round.

Continue reading here


December 13, 2019

Rêve D 7.4V 3700mAh shorty LiPo battery pack

Rêve D have announced the soon release of their new 7.4V LiPo short battery pack. Built from high-quality 100C cells the lightweight 3700mAh battery is ideal for all applications that require a low weight with the 3700mAh capacity still allowing for good run times. The low-profile hardcase pack weighs in at 156g, it measures 93×46.5×18.5mm and it is equipped with 4mm connector tubes and an industry standard 2mm balance connector. While being intended for drift car racing, the pack can also be used for formula, pan car and off-road buggy racing.

Source: Rêve D [teamreved.com]


December 13, 2019

Revtech X-Factor modified motors

Trinity have introduced the new Revtech X-Factor modified brushless motors in a range of 3.0T to 9.5T windings. The power plants utilise a highly machined aluminium case for exceptional heat dissipation and this, in combination with highest quality materials, gives virtually zero fade during a run. New and improved solder tabs now make wiring even easier. A huge variety of optional roots such as 12.3mm long, 12.5mm long, 11.5mm, 12mm, 12.5mm and 13mm allows to tune to power to the drivers preference. The motor is available in 3.0T up to 7.5T windings in even and .5 variants and also as 8.5T and 9.5T versions.

View more images here


December 12, 2019

Fenix G56-12 1/12th scale pan car – Coming soon

Fenix Racing have released a first image of their forthcoming new G56-12 1/12th scale pan car. The vehicle will utilise a V-link design to mount the rear power pod, promising exceptional traction and side bite while the highly adjustable front end with lower carbon fibre and upper moulded arms ensures high corner speeds. Full details and more images will become available soon.

Source: Fenix Racing [fenix-racing.com]


December 12, 2019

DE Racing 8ight-X & MP10 BumpSkids & rear skid plates

Coming from DE Racing are their new BumpSkids and rear skid plates for the TLR 8ight-X and Kyosho MP10 buggies. Starting with the BumpSkids, they combine a well functioning front skid plate with a refined front bumper to create the ultimate in protection, performance, and styling. As for the rear skid plates, like the front BumpSkids, these are ultra thin, they wear like aluminium and save the chassis from becoming overly scratched or damaged. They are sold in packs of three and use the original bulkhead mounting hardware.

View more images here


December 12, 2019

Xtreme Racing T4’20 carbon fibre motor spacer set

Xtreme Racing have introduced their new carbon fibre motor spacer set for the Xray T4 2020 touring car. When running a motor without or just a small chamfer, the motor can may hit the top plate when running a smaller spur gear. The set includes a 1.2mm and a 2.0mm thickness spacer that locates the motor further away from the motor mount and top plate, allowing top use a wider range of gear ratios with specific motors. The spacers are designed to be held into the motor so they are easier to install but can be removed if needed. The set also includes miscellaneous fasteners.

View another image here