April 29, 2024

Grand Prix 3D RC10 Motor Plates and Guards

Australia’s Grand Prix 3D has introduced their precision-crafted RC10 Replica Motor Plates and Motor Guards, the ultimate upgrade for your RC10 builds, restorations, and of course their GP3D ’89 & ’91 Stealth Worlds replicas.  Available in iconic gold anodised, sleek black anodised, and raw/unanodized finishes, these motor plates and guards are engineered for both style and performance.  Enhance your RC10 with these high-quality parts, ensuring your ride stands out on the track or shelf.

View more images here


April 29, 2024

EXO Design Ultima Front Shock towers & RC10 bumper

Retro conversion kit producer EXO Design has made some recent additions to its range with the release of new front shock towers for the Kyosho Ultima and a nylon front bumper for Team Associated’s RC10 Classic.  The reinforced front shock towers are made from 3.5mm carbon fibre and are available for both the original Ultima shocks as well as for those running big bore shocks on the buggy. They feature extra mounting positions for fine tunings of the suspension set-up. EXO Design are keen to highlight the bumper for the RC10 is not 3D print but made from nylon material.

View more images here


April 28, 2024

Bittydesign P-GT3R 1:10 GT 190mm body

Continuing to expand their range of bodies for the GT class, Italian company Bittydesign has released the all new P-GT3R body shell made for 1:10 190mm electric touring car platforms.  The body shell is universal and mounts on all 1:10 190mm models, the wing complies with the measures as per USGT regulation (10mm height) and can therefore be used at any race.  The shapes inspired by a GT3 racing car have been adapted to the proportions and measures necessary for use with the 190mm electric models; the design phase took several months to finish every single particular, the attention to detail was obsessive in order to propose a body that could optimise aerodynamics and at the same time remain real in its proportions and aesthetics.  Included in the kit are a complete set of screw, nuts and large plastic washers to fix properly the rear wing, the front nose flaps (mounted with double side tape) and a decal sheet pre-cut and windows mask.

View more images here


April 28, 2024

T-Works RC10B7 Alu & Brass front bulkheads

T-Works has released aluminium and brass front bulkhead options for the Team Associated RC10B7 1:10 2WD Buggy.  Available in 0 degree and +/- 2.5 degree variants, the machined aluminium bulkheads are the same as the original while the brass versions weigh a heavier 26grams and 27grams respectively for the 0 degree and +/- 2.5 degree options.  This allows you to fine tune the front end weight balance of the buggy depending the track conditions.

View more images here


April 28, 2024

175RC RC10B7 Carbon Battery hold down system

New from 175RC is this Carbon Fibre battery hold down system for Team Associated’s RC10B7 1:10 2WD Buggy.  This system features carbon straps that replace the stock plastic holders, and uses quick release urethane straps to keep your battery in place during hard cornering and landings.  These straps provide a nice cushion for your battery to ride against, instead of hard plastic tabs wearing on the case, and causing your battery unnecessary stress.  This system also comes with upgraded Ti-Look screws for that Factory Team look.

View mounted here


April 28, 2024

VP Pro 1:10 Buggy tyre inner sidewall adapters

Having previously released them for 1:8 Buggy, VP Pro has now released their Inner Sidewall Support Adapters for 1:10 Buggy tyres.  Sold as a pack of 12-pieces, by adding the inner sidewall support adaptor which is glued into place, the sidewall becomes much stiffer helping to alleviate the issue of soft rubber flex too much in high grip conditions.

View more images here


April 26, 2024

2024 Philippine Masters Chassis Focus Index

Last weekend Red RC made our third trip to Manila for the world class offroad event that is the Philippine Masters.  Famed as being Asia’s biggest annual 1:8 Offroad race, the Circulo Verde track is renowned for its difficulty and 3D style build with this year’s 12 edition of the race using a new method to seal the surface.  This resulted in minimal tyre wear even over the 1-hour Main final in which Team Associated’s Davide Ongaro recovered from an early flame out to take his fourth win in the capital city.  The first time Sparko was officially represented at the race, a great driver by Ryan Pavidis netted the American runner-up spot.  Great to see the legendary Atsushi Hara back racing at the the front end.  It was great to once again do a chassis focus with him, Sworkz hooking him up for the event, and it great to see the former World Champion enjoying his racing so much once again.  Attracting 205 entries from 16-nations, we got the chance to photograph buggies from 9 drivers representing 7 different manufacturers as well as the TQ & winning Sworks truggy of Bulgaria visitor Plamen Petrov we will have compiled into our latest Chassis Focus Index.

View Chassis Focus Index here


April 26, 2024

Smokem A10-25 Caster Indicators

Australia’s Smokem Racing has released new Caster Indicators for use when setting up your ARC A10-25 1:10 Electric Touring Car.  The set if four, they make setting up and maintaining your ARC A10-25 an absolute breeze.  Made from high quality 3D-printed polymer, the Caster Indicators simply slip over the A10-25’s alloy steering hubs.  Designed to suit all popular setup stations, they even provide clearance over the bearing clamping cap screws.

View mounted here