October 9, 2010
…internal turbulence, a special selected bronze material for the bushing is used to decrease the internal friction and wear. A special and new way for the lubrication of the crankshaft-pin is used for this conrod to increase the lubrication film and reduce friction. The specially selected bearings chosen for the TecnoPower engines are of the high-speed type to obtain the highest reliability and performances. The glowplugs used for the “T01” are of the conical/turbo type and made out of Stainless Steel. TecnoPower T01 Engine Specs Part# 01001-23T Type: Truggy Displacement: 3.83 cc(.23) Bore: 17.05 mm Stroke: 16.80 mm Intake Ports:…
September 18, 2010
Schumacher have announced the the release of this new steel idler gear upgrade for the CAT SX & SX2. Providing longer life than the original plastic CNC gears, with more running between rebuilds, there is now also a larger range of gearing options, especially helpful for stock racing. The slipper now locates on the spur side and has easier access than before. The arrangement is sold as standard with 33T and 22T, slightly different than the kit standard 33T/23T, therefore gear ratios should be adjusted accordingly. 31T/24T, 32T/23T, 34T/21T & 35T/20T are also mountable with the use of industry standard…
July 21, 2010
New from KM Racing for their H-K1 200mm chassis is this range of optional parts. To bring the car up to regulation weight as well as putting that weight in the correct place KM have released 2 new copper battery plates in either 25g or 30g weight. Also new are a complete range of anodised aluminium pinion gears in 15T, 17T, 20T, 22T & 23T. Other new parts include a front carbon bumper plate set, foam bumper, a 800mAh NiMh AAA receiver pack and finally a pair of CNC machined POM rear belt tension adjusting hubs. Source: KM Racing [km-rc.com]…
February 25, 2010
CSO Products have released two complete sets of pulleys for the Kyosho V-One RRR Evo2 WC and V-One S3. These hard coated 7075 T6 aluminium pulleys are sold in sets of 5 with both featuring a 23T, 27T, 21T and 2 x 18T with the only difference between both is the 21T brake pulley which is a single piece, incorporating pins for the brake disc, on the RRR set. Source: CSO [cso.com.hk]…
February 17, 2010
…spring for the V10 for high grip conditions this spring is now available as an optional part. Still protecting the servo from being damaged it offers more pressure on the servo saver. The existing range of pinions for the Velox V10 Competition Clutch is now completed by a 16T pinion for the first gear. This suits very small tracks where a lot of power from the bottom is needed an joins the previously available 17T and 18T pinions for the first gear and 21T, 22T and 23T for the second gear. To adjust the off-set at the Velox V8 several…
February 8, 2010
New for the World Championship winning V-One RRR 1/10th scale 200mm chassis comes a range of new optional parts from Kyosho. The new parts include a lightweight racing brake disk for improved fade free stopping power, multi-offset wheel hubs for fine tuning the setup on your car, a 3-D racing clutch assembly for great power delivery, an aluminium middle shaft mount and a variety of hardened pinions in 16T, 17T for the first gears and 21T, 22T and 23T for the 2nd gear. Source: Kyosho [kyoshoamerica.com]…
November 11, 2009
The Indonesian 1/10th EP TC National Championship was held on the BE Mall Carpet track, Bandung last weekend. The race ran with 2 class, Modified and Stock 23T / 11.5 BL and the race format consisted of three 5 minute qualifying sessions for both classes, three 5 minute finals for Modified and three 7 minute finals for the Stock class. Most of the drivers used foam tires with 35 shore for stock class and rubber tyres with 24 shore for the modified class. It was young Xray driver Bowie and experienced Tamiya racer Wato that took the TQ spot in…
September 9, 2009
Team Titan have released a range of new pinions for the Serpent 733 Centax WC clutch. Made from coated 7075 T5 aluminium they come in 16T, 17T & 18T first gear pinions and 21T, 22T & 23T 2nd gear pinions. Source: Team Titan [team-titan.com.tw]…
