Red RC

December 5, 2024

Infinity IF18 Sway Bar Stoppers

Infinity has released new Sway Bar Stoppers for the front stabiliser on its World Championship winning IF18-3 1:8 Onroad Car. By making the contact surface with the bearing spherical, smoother movement of the sway bar is achieved. Durability has also been greatly improved by using steel. The Stabiliser Stoppers available in 2.3, 2.5, and 2.7mm. Also new from the Japanese manufacturer is a new Steering Knuckle Plate for their IF15-2 and IF15-2W. This allows for a greater steering angle of the outer tire in corners than the standard kit version. This will make tighter cornering possible, and can improve high speed steering on larger tracks.

View IF15-2 Steering Knuckle Plate here

December 5, 2024

Gonzales joins Team EAM

Team EAM has announced the addition of US Offroad racer Matthew Gonzales to its race team. The 2-time ROAR Spec National Champion and Modified A-Main finalist will use their batteries in all his vehicles for the upcoming events. The former double winner of the annual Kinwald Klassic will be present at most of the 1:10 Offroad events for technical support of the Hobbywing team as well as he will squeezing in racing as much as possible. Better known as “Matty G”, he is a specialist for horsepower in stock classes, with EAM stating they are very proud to have him on board and to have him choose to use their batteries.

Source: Team EAM [teameamotorsports.com]

December 5, 2024

Reedy Zappers SG6 Competition HV-LiPo

Reedy has released a new line of HV-Lipo batteries it is calling Zappers SG6. Incorporating new advancements in cell manufacturing and battery construction they have improve power output, lower internal resistance and increased durability. Featuring a 3.8V/cell nominal voltage which means that the battery can be safely charged to 4.35V/cell, this can be useful in applications such as 1:8 eBuggy where maximum power output and run time are critical. Even when the typical 8.40-8.44V (4.2-4.22V/cell) charging limit is enforced, the SG6’s inherently flat discharge curve results in higher voltage deeper into the race and more consistent power output from start to finish. Available in nine configurations for a variety of onroad and offroad applications, a high quality, durable hard case helps prevent damage while embedded socket connectors keep power robbing resistance to a minimum. Male ESC connectors are included with each Zappers SG6 HV-LiPo battery.

Source: Reedy [associatedelectrics.com]

December 4, 2024

MR33 Tire Warmer PLUS+ 4S Battery Mount Set

MR33, working together with Boom RC, has released this 3D printed bracket & cover for the SkyRC tire heating station meaning you can carry your 1:10 Touring or FWD car to the track with fully powered tire warmers on. Having noticed that the new Matrix D36 in particular needs a lot of heat to function optimally, the decisive factor is how much heat is still present in the tire at the start of the race. The Tire Warmer +Plus is compatible with the SkyRC Tire Warmer and is attached with 4 existing screws. Operation is designed for a Gens Ace Redline 2.0 6000mAh 15.2V 140C 4S battery. You can park your vehicle on the foam-padded surface like on a car stand. To connect the heating station and 4S battery you need a normal 13AWG silicone cable which you have to solder to a 5mm Glod connector (battery side) and to an XT60 connector (device side).

View more images here

December 4, 2024

Futaba T10PX Black Edition

Famed Japanese radio manufacturer Futaba has announced a new limited Black Edition of their high-end T10PX wheel transmitter. With the 10PX the radio of choice of record breaking three in a row Electric Touring Car World Champion Bruno Coelho, along with the exclusive black metallic Black Edition wheels and a subdued carbon-look body, the Black Edition also comes standard with an aluminium steering housing and aluminium brake lever that offer dramatically improved rigidity, making it suitable for entry into the racing scene.

View features and more images here

December 4, 2024

Reds Racing Xtract Tool

Italian engine brand Reds Racing has unveiled the REDS Xtract Tool which they are billing as the perfect companion for nitro engine enthusiasts looking for a hassle-free and efficient way to remove engine cylinders. Designed with innovation and precision, this new tool is engineered for both performance and portability, making it an essential addition to your toolbox. Lightweight and High-Strength it is produced using cutting-edge 3D printing technology and high-strength polymer materials. A sleek and easily portable solution. Whether you’re working with REDS Racing engines or other brands, the Xtract Tool is designed to fit seamlessly. Easy to use it simplifies cylinder extraction, saving time and effort while ensuring a secure grip that won’t damage components. Available in two versions, for Buggy Engines it is compatible with cylinders measuring 16.26mm, perfect for off-road setups. For Onroad and GT Engines it is specifically tailored for cylinders measuring 16.0mm.

Source: Reds Racing [reds-racing.com]

December 4, 2024

RSRC MP10T/MP10Te Carbon Fibre parts

RSRC, the brand of multiple European 1:8 Buggy Champion and factory Kyosho driver Reno Savoya, has extended their carbon fibre parts range with suspension arm insets for the Kyosho MP10T/MP10Te 1:8 Truggy. They have designed a ‘sandwich panel’ system that leaves the internal reinforcements of the suspension untouched, with a 1mm plate on top and a 1mm plate underneath. This will greatly improve the wishbone strength during big hits with very few front lower arm breaks due to the stiffeners. It also improve handling making the truggy more precision. The ‘sandwich panel’ fits the MP10T nitro and electric truggies.

View more images here

December 4, 2024

JConcepts RC8B4.1 P2 Body

Continuing the roll out of their P2 body for 1:8 Buggies, JConcepts has released their latest body shell for the Team Associated RC8B4.1. Debuting it at the 2024 Mugen Challenge and then bringing it to the recent IFMAR 1:8 Offroad World Championship in Spain, the P2 was originally created for the 1:10 racing. Building up a prototype using styling cues from the World Championship winning body used by Spencer Rivkin in 2019, and reaching back to 2010, JConcepts experimented with a tall stabilising fin on the rear of the body. For a fresh season of competition, they incorporated a small mini fin placed behind the rear of the cab that does not interfere with the engine head. In the rear, the ramping feature that is so popular on the P2, creeps up behind the cab and engine head to create extra force and stability.

View more images here