Red RC » P Off Road

May 22, 2023

T-Works Precision Balancing Brass Weights

Coming from T-Works is a Version 2 of their 5g and 10g precision balancing brass weights. Machined from high quality brass and finished with a black hard anodising, the weights also feature gold-colour writings for easy identification. The screw-on universal weights fit any type of car, helping to up overall weight or fine-tune weight balance and can be mounted at different ends to effect chassis flex. Measuring 13.5 x 4.9mm for the 5 grams and 13.5 x 9.5mm for the 10 grams they are available separately.

Source: T-Works [rc-tworks.com]

May 22, 2023

SMJ Low Viscosity CA glue

Japan’s SMJ has a new Low Viscosity CA glue intended gluing rubber tyres with low viscosity and good fluidity for easy work and excellent adhesive strength. Packaged in moisture-proof aluminium pack with zipper, it comes with two types of nozzles: an ultra-fine needle nozzle and a micro nozzle to facilitate tire gluing work.

Source: SMJ [smj-rc.com]

May 22, 2023

Donathen RC Sheathed Sensor Wires

American RC wiring and cables specialists Donathen RC has introduced two new sheathed sensor wires. Available in 2 different variations, tube or flat style, either style has their choice of one of 24 sheathing colours, and one of 6 heat shrink colours. In total the customer has the choice of length from 50mm-610mm. These sensor wires differ from our “Fully Protected” version in that the sheathed sensor wires only have mesh sheathing covering most of the sensor wire, leaving the ends exposed. With the ends exposed it offers the most amount of flexibility.

Source: Donathen RC [drcproshop.com]

May 22, 2023

LC Racing BHC-1 Alu Option Parts

LC Racing has released a number of optional aluminium parts for their BHC-1 1:14 2WD Buggy. Direct replacements for the standard plastic parts included with the kit, the new offering of option parts include the Front Bulkhead Hinge pin mount, Rear Chamber link mount, RF Hinge Mount, RR Hinge Pin Mount. All parts have an anodised finish in LC Racing’s traditional red colour.

Source: LC Racing [lcracing.net]

May 19, 2023

Raceform Bling Series Colorway Lazer Car Stand

Singapore’s Raceform has added a new Bling Series Colorway Lazer Stand to its range of racing accessories. Made from the most premium plexiglass in the industry, the latest Bling Colorway with the highest Hologram Glitter count in the market will definitely attract attention on your pit table. The carefully designed futuristic Lazer Car Stand now features detachable sides for ease of space to fit into your race luggage. EVA foams padding on the top and bottom of car stands to prevent slippage and also protects scratches from sandy under-chassis. Flip the stand up for shock building – one side for 1:10 scale and the other side for 1:8 scale for medium and large car stand. The Stand is design to fit even the longest shock length in the market and is available in 3 sizes – Small (190mm x 115mm x 33mm(H)) for 1:12 and 1:10 On Road, Medium (190mm x 115mm x 48mm(H)) for 1:10 Off Road and Large (190mm x 115mm x 90mm(H)) for 1:8 Offroad.

View more images here

May 18, 2023

JConcepts Finish Line radio bag

JConcepts has released its own Finish Line radio bag to provide protection for one of the single most expensive purchases in RC. In many instances, radios are abused during racing conditions and not properly stored when they are inactive. Storage choices for radios are quite slim and once priced and evaluated, some racers prefer not to have them simply because they do not travel very well in their luggage or typical race gear. The new Finish Line radio carrier with outer woven fabric gives it a very luxurious look at first glance, however, the handy new item is designed with travel, cushion, ease of use and protection in mind. The lightweight design consists of a woven fabric outer bag which has a convenient and easy access zipper closure and inside has a Velcro closure pouch for additional easy access items. Inside, a high-density, form fitted foam, pre-cut to specific models cushions all sides of your pricey possession. The bag can be ordered for the Futaba T10PX, Futaba T4PM or Sanwa MX6.

Source: JConcepts [jconcepts.net]

May 17, 2023

JConcepts 1997 Ford F-150 MT body

In their latest Monster Truck body release, JConcepts has added the 1997 Ford F-150 to its extensive range. On the RC scene, very few options exist to bring 1997 to the latest builds and chassis on the market, until now. JConcepts together with Ford licensing has produced the 10th generation truck to fill the void in the market, and above all, allow racers to consistently build, detail, and tune their RC vehicles into their personal favourites. The new shell starts with a 13” wheelbase design which aligns with the latest LMT, and long wheelbase RC monster trucks on the market. In today’s racing, the 13” wheelbase remains one of the most popular and the 1997 drops down on the chassis with great proportions. A single cab design was built to emulate the most famous 1:1 truck featuring the gen 10 softer body lines, rounded front-end and extended front chin style bumper. Large wheel wells are incorporated into this body to clear the large monster truck tires on the market while still providing the stock Ford look. The side windows are large, recessed and help the product sit with a racing stance while maximum scale visibility can be seen out of the front windshield.

View more images here

May 17, 2023

1:8 Buggy Euros Warm-up Race – Announcement

Famed Spanish offroad track RC Redovan has announced that it will run the Warm-up Race for this year’s EFRA 1:8 Nitro Buggy European Championship over the weekend of June 16-18. Having hosted last year’s IFMAR World Championships, the Baldo brothers owned track previously host the European Championship in 2016 and has become one of the world’s most iconic tracks thanks to its elevation change from the left to the right side of the massive track. The timetable for the Warm-up Race will see Friday practice, Saturday qualifying and Sunday Finals. One very important detail to note for racers is that under Spanish law, if you do not have a special license of precursors, in order to use 25% nitro fuel you will be required to buy the fuel within the grounds of the circuit. The organisers will have fuel available from the main brands including Runner Time, Merlin, Energy and Nitrolux. As at the World Championship, the fuel must remain deposited at the circuit from Friday to Sunday for all drivers including Spaniards. Registration for the Warm-up Race is open now – click here

Source: RC Redovan [Facebook]