Red RC

February 7, 2024

Aerox plastic specific side cutters

New from Aerox, the accessories brand from Schumacher, are these plastic specific side cutters. Designed to remove plastic parts from a sprue it is available in a double edge or single edge jaw design. The Slim Double Edge cutter has two sharp cutting blades with the slim, thin & sharp jaw blades enabling easier removal of smaller parts with less clearance around the sprue. It is best for use on plastic parts with a diameter of less than 3mm. For hard plastics cutting diameter is limited to 1.5mm. It has an adjustable screw to protect the precision blades from damage. The Extra Slim Single Edge cutter has a single edge with one sharp blade with a strong focus on plastic gate cutting.

View cutter tips here

February 7, 2024

Lugz RC Ghost Barz 1:10 Buggy Tyres

American tyre brand Lugz RC Racing has has announced its latest 1:10 buggy release with the new GHOST Barz. Based off of their existing BARZ tyre, the new Ghost variant shortens the existing tread pattern from .6mm to .1mm while the carcass has been thickened to add overall support. The tyre is designed as a semi directional, one direction will give slightly more forward traction & less side grip or reverse the direction and have slightly more side grip and less forward traction. Also a great tuning option on the front of the car, before doing set up changes to the vehicle to add or loose steering, try rotating the tyres.

View close up of thread here

February 6, 2024

RUDDOG RR482V2 2.4GHz 4-Channel FH4 Receiver

New from Ruddog is the RR482V2 2.4GHz 4-Channel FH4 Receiver that is specially designed to be compatible with the latest generation Sanwa radios with FHSS-4 and FHSS-3 transmission. The second generation, and smaller, RR482V2 is the ideal choice for anyone looking for an inexpensive but high-quality alternative for their Sanwa remote control. The RR482V2 is compatible with the Sanwa’s M17, MT-44 and others (see full list below) and works seamlessly with these Sanwa transmitters. Supporting FHSS-4 and FHSS-3 ensures smooth operation in SHR or SSR mode. Measuring only 18.5 x 20.5 x 28.0 mm and weighing only 5 g, the RUDDOG RR482V2’s compact and lightweight design means it fits in most vehicles.

View specs/radio list here

February 6, 2024

EXO Design`87 JJ Ultima Replica Conversion Kit

EXO Design has started shipping its latest conversion kit intended for the Kyosho ’87 JJ Ultima Replica 60th Anniversary limited chassis. The kit includes a 7075 T6 chassis and 8 separate carbon fibre parts, all made with 100% carbon fibre plate, aluminium stand offs, washers and screws. The kit has reinforced front and rear 3.5mm shock towers and in addition to using original shocks it is compatible with modern 1:10 buggy shock systems. Extra mounting positions on the shock towers are available for fine tunings. Another feature of the conversion is the adjustable battery mounting positions with three easy to use options.

View more images here

February 6, 2024

Blitz Pista-10 1:10 190mm GT Bodyshell

New from Blitz is the Pista-10 2 door GT body designed for all 1:10 190mm electric power touring cars. With a super low stance, the high-performance aerodynamic body provides a stunning look and easy handling for all levels of driver. The rear wing comes with 2 cut lines allowing driver choose a higher or lower wing, the higher wing gives more stability while the lower wing can give the car more steering. The PISTA-10 comes in standard weight and or a 0.5mm lightweight version and is supplied with window mask and light decals.

View more images here

February 6, 2024

Reedy W24 Pullover Hoodie

Reedy Power has introduced a new addition to its team wear for 2024 with the new W24 Pullover Hoodie just in time for the Winter racing season. The simple design features the iconic Reedy Power logo on the front of the black base colour Pullover Hoodie which is a 50/50 cotton and polyester blend fabric for comfort, warmth, and easy care.

Source: Reedy [associatedelectrics.com]

February 5, 2024

Infinity IF11-2 1:10 Formula chassis

Creation Model has released their new 1:10 Formula chassis, the Infinity IF11-2. The car latest IF11 has been reborn as a wide-tread and foam tire-compatible model. The hybrid monocoque chassis which is the identity of the Japanese manufacturers competition Formula car, has been retained. New features of the IF11-2 are the rear wing mount is integrated with the rear diffuser, reproduced for the first time ever in an Infinity kit using 3D printed nylon resin molded parts. One of the symbolic parts of the IF11-2, it is based on the IF11’s concept of combining scale and performance at a high dimension. Most of the carbon plate parts and the rear bulkhead have also been redesigned. Stable rear grip and traction. The new design provides sufficient steering response and high cornering speeds. The IF11-2 was developed with a focus on achieving a high dimensional balance of these elements. The front wheel is suitable for large-diameter wheels with an inner diameter of 40 mm or larger. Smaller diameter wheels (36mm inner diameter) can be accommodated with optional parts.

View more images here

February 5, 2024

Drake & Anderson join Hobbywing

Continuing its 2024 driver announcements, Hobbywing has confirmed top American racers offroad legend Adam Drake and 1:12 star Kemp Anderson have joined its official team line-up. A major figure not just on the offroad track but on the racing scene in general, Drake will be a huge asset to the electronics manufacturer and with Mugen Seiki now involved in the 1:10 offroad market with the release of their MSB1 1:10 2WD Buggy, his deal with Hobbywing should be mutually beneficial. Kemp, a leader driver on the US onroad scene, shot to international fame in December when he became the Top Qualifier at the IFMAR 1:12 World Championships in Florida using a Hobbywing ESC and motor and now for 2024 officially becomes a team driver as he continues his racing programme with Awesomatix.

Source: Hobbywing [hobbywing.com]