Red RC

October 19, 2023

Awesomatix A800R new parts release

Awesomatix has released a number of new parts for it A800 1:10 Electric Touring Car. A new Rear Belt Tensioner for A800R mounts on the chassis right behind the motormount further reducing belt skipping on the rear pulley and extends the lifespan of the belts. They also have a new APS Additional Progressive Spring set which is designed for use on A800R. Progressive conical tapered springs of the APS set press on the lower suspension arms and add a progression into the suspension spring rate. Test results showed more consistent lap times with improved overall feeling on the low-med grip asphalt and carpet tracks. Two types of springs are included in the APS set – SPR-P1 spring, adding ~13 gf/mm average suspension rate on the wheel and a slight progression, and SPR-P2 spring, adding ~20 gf/mm average suspension rate on the wheel and increased progression. The SPR-P1 spring is mainly recommended on the rear end of the car, while the SPR-P2 is recommended for the front end of the car. It is also possible to add only the progression into suspension rate without increasing the total average suspension rate. In that case you should soften the main leaf springs settings by 13gf/mm when using SPR-P1 and 20gf/mm in case of SPR-P2 usage.

Continue reading & more images here

October 19, 2023

Xpress Execute XQ11 alu chassis

Just in time for the indoor season, Xpress has released an aluminium chassis plate for their Execute XQ11 1:10 Electric Touring Car. The chassis which features extra holes for fine tunes chassis weights, is perfect for racing on carpet tracks but is also a great option for tuning the car for high grip outdoor asphalt tracks.

Source: Xpress [rc-xpress.com]

October 19, 2023

Peru set to host 2025 1:8 GT World Championship

After a very successful second running of the IFMAR 1:8 GT World Championship in Sydney, Australia, last week, the third edition of the race is to travel to South America in 2025 with Peru set to be announced as hosts. Headed up by Michael Stone, New South Wales Radio Controlled Racing Car Club did a superb job of hosting the 2023 event helping to raise the profile of IFMAR’s newest World Championship considerably compared to the inaugural event held in Florida in early 2020. With the raised profile, Peru looks set to bolster the class further given the large following for the category in the region. The Miniautodromo Polo Bracale in Lima, Peru, is lined up as the host circuit and already has a strong track record having hosted the recent RCtarget backed COPA America race. Located in the Magdalena del Mar district, next to the beach and very close to the most popular districts of Lima, the track length is 280 meters, with a 50 meters straightaway and an average width of 5 meters with the surface a fine grade asphalt. Speaking to RCtarget/IGT8 boss Paolo Morganti during his participation at the Worlds in Sydney, the highly experienced international racer believes the track is a perfect setting for a Worlds and has the people required to put on a World class event. He also said costs associated with being at a race such as eating out are low. An official announcement on the host of the GT Worlds is expected from IFMAR shortly.

Image: APERCAR [Facebook]

October 19, 2023

Yokomo ‘Super Dog Fighter’ re-release

Yokomo has announced details of the upcoming re-release of its late 1980’s ‘Super Dog Fighter’ 1:10 4WD Buggy, the Japanese brand the latest manufacturer looking to enter the retro market. If you are a long-time RC car user, you may be familiar with the ‘Super Dog Fighter’ kit which became the foundation of modern racing off-road cars. The not only had a great record in Japan but also in world-class races, and is known for having fans all over the world. There have been many requests from passionate fans for a long time, and commercialisation has been considered many times, but now the reprint has finally been realised. However, there are no resin part molds left from that time, and the design is based on measurements of existing machines, and the current release date is scheduled for December 2023.

Continue reading here

October 19, 2023

VP Pro Liquid Mask

Adding to its line of RC accessories, VP Pro is now offering Liquid Mask. Supplied in 100ml bottles with a convenient flip-up cap it is ready to spray or brush with no thinning required. Allowing for precise & detailed designs, the easy to apply liquid gets into difficult areas of your body shell and is blue in colour for clear distinction between masked and unmasked areas.

Source: VP Pro [vp-racing.com]

October 19, 2023

OfficinaRC PFTE Chassis Skin Frictionless & Ultra Thin Roll

OfficinaRC has released a range of PFTE CSF (Chassis Skin Frictionless) chassis protectors & PFTE Ultra Thin Roll of tape. Always at the forefront of providing innovative solutions for rc enthusiasts they are proud to present the ultimate solution to the common problems encountered by racers. During use on carpet, dirt from the tires and additives tend to accumulate on the chassis with this buildup making the model increasingly clumsy lap after lap, compromising performance and driving experience. The new PFTE line is specifically designed to address this issue. Thanks to the innovative material used and the precise shape suitable for the frames of the most popular models, PFTE minimises the accumulation of dirt on the frame. This means you can enjoy smoother and more consistent driving, lap after lap. The PFTE line is available for the following models: Xray X4 2024, Xray X4 2023, Awesomatix A800R, and Awesomatix A12. For those who have models where pre-cut protection isn’t available, OfficinaRC also offer a convenient 3cm wide roll that can be used to protect the frames, allowing for custom applications to suit your needs.

View key features & more images here

October 19, 2023

STRC SCX10 Pro machined Brass Option Parts

In their second wave of option parts release for the Axial SCX10 Pro 4×4 Crawler, ST Racing Concepts has produced Front and Rear CNC Machined Brass Axle tubes as well as Brass shock components. While the kit already includes steel axle tubes, the Brass components provide an approximately extra 10-11% in weight to further improve the crawler’s capabilities. The brass shock components adds the final touch to the shock absorbers and provide further weight to the axles.

Source: STRC [teamstrc.com]

October 19, 2023

RUDDOG 35mm Alu HV 4WD Direct Mount Fan

New from RUDDOG is their 35mm HV 4WD aluminium fan that is specifically designed for shaft-driven 4WD buggies. It enhances cooling efficiency and can be directly mounted onto the chassis brace, eliminating the need for an additional fan mount. It’s seamlessly compatible with top-tier 4WD buggies, including Team Associated B74.2, Xray XB4, TLR 22X-4, and Yokomo MO 2.0. With a unique aluminium Direct-Mount Fan Case, the 35mm fan diameter ensuring high airflow and dual ball bearing improve durability and Ultra High Speed for optimal cooling. The direct mount design minimises space and weight.

Source: Ruddog [ruddog.eu]