Red RC

October 24, 2023

Exotek Reflex 14B/T/MT alu option parts

California based Exotek Racing has released a series of aluminium option parts the Team Associated Reflex 14B, 14T, and 14MT series of 1:14 4WD offroad chassis. Made from heavy duty alloy with a polished blue finish, at the front end of the chassis the parts includes steering hubs with machined bearing pockets and heavy duty construction for smooth and precise steering operation, alloy caster hubs and steering cranks. The steering cranks includes 4x M7x4 bearings and m2.5×6 and m2x6 steel hardware. At the rear, Exotek has produced heavy duty alloy rear hubs which are also in their blue finish and carry Exotek branding.

View more images here

October 23, 2023

T-Works MTC2R Lower Arm Pivot Insert Nut Driver

T-works has released a Nut Driver specifically designed for the Lower Arm Pivot Insert on the Mugen Seiki MTC2/MTC2R 1:10 Electric Touring Car. The Hard Coated 7075-T6 driver features a specially machine tip for easy mounting and removal of the lower arm pivot inserts.

View close up of tip

October 23, 2023

Landén doubles in Swedish National Cup – Report

Over the weekend the second & final round of the 1:10 Buggy Swedish National Cup was held in Borås where it was Team Associated driver Alexander Landén who completed the series double. The largest indoor event for a long time in Sweden, the race attracted 63 2WD and 43 4WD drivers who arrived Saturday morning to a freshly built layout for the series decider. In 2WD, right from the start it was quite clear that Landén seemed to be the one to beat this time. Locking out all four qualifying rounds we also had the opportunity to test some new ideas on the setup during the fourth round, which improved the car even more for the finals. Behind Alexander, Xray drivers Hampus Berg and David Ronnefalk would line up 2nd and 3rd on the grid. Alexander secured the win by taking the first two rounds with relative comfort, being the only driver scoring 19 lap runs. Hampus Berg won the final leg and by that securing second and third place went to Otto Ausfelt (AE) tied on points with Ronnefalk. This also meant that Landén was crowned the overall Series Champion.

Continue reading here

October 23, 2023

Phend is 2023 Masters of Dirt Master

The ninth annual Masters of Dirt took place at BeachRC in South Carolina over the weekend where Dakotah Phend was crowned the overall Master of the event for his combined results in 2WD & 4WD Buggy and Stadium Truck. Attracting over 450 entries, qualifying for 4WD saw three different drivers post TQ runs with TLR’s Brennan Schimmel the overall Top Qualifier on tie break from team-mate Phend with Team Associated’s Aydin Horne securing P3. In 2WD, Phend secured pole having TQ’d Q2 & 3 from new World Champion Tater Sontag whose TLR topped the opening round. Rivkin’s Associated completing the Top 3. With single 10-minute A-Mains, Phend led 2WD from start to finish as Schumacher’s Broc Champlin came through from P5 to finish just ahead of Rivkin. With the event concluding with the 4WD A-Main, it was Rivkin who came through for the win over 3-seconds up on Ryan Maifield and Phend with both Schimmel and Sontag non finishers. In Stadium Truck, Phend took both the TQ and win with Rivkin and Horne completing the podium.

Image: Masters of Dirt [Facebook]

October 23, 2023

3Racing Cero Ultra 2.0

3Racing has released a new version of their competition level 1:10 Electric Touring car platform, the Cero Ultra 2.0 which they are recommending for asphalt use. In the second generation of Cero Ultra, the main improvement is to use a shorter and narrower chassis to improve cornering efficiency. The belt length is now a shorter S3M345 x 2 to achieve a shorter chassis and more direct acceleration output. The front and rear lower wishbones have been carefully improved to more room for the anti-roll bar movement and a shorter wheelbase. The lay-down front and rear absorbers mounting make the body roll more efficient, the main chassis has a new weight distribution position and a shorty battery socket, and the diameter of the lower wishbones rolling shims has been increased to improve the durability of the chassis plate, a caster has been added to the rear upright to increase the speed of all corners, and the steering system has changed to M4 X 7 bearings To improve accuracy, the upper deck was shortened to accommodate the twist of the chassis.

View more images & features here

October 23, 2023

Kinwald Klassic double for Gonzales

1Up Racing/Team Associated driver Matthew Gonzales completed the double at the Kinwald Klassic at Hobby Action in Arizona over the weekend winning both 2WD and 4WD Buggy. The fourth annual running of the race that is held in honour of Offroad RC great Brian Kinwald and helps raise funds for the Crohn’s Foundation, qualifying at the recent World Championship host venue would see Gonzales reign. Securing the 2WD TQ in the final round of the three qualifiers ahead of Kyle Davis who also set his fastest time in Q3, in 4WD it was a similar story as he took the TQ ahead of Riley Wortman. In the finals, Gonzales continued his form winning A-Main encounters to win 2WD from Scott Spear while in 4WD 4WD Wortman and Davis completed the podium. After his sterling work with the track preparation and maintenance for the World Championships last month, Jake Thayer was back enjoying his racing taking the TQ and win in 17.5 2WD Buggy.

Image: 1up Racing [Facebook]

October 21, 2023

Team Associated ‘crystal clear’ RC10

With Team Associated attending this year’s famous SEMA Show, the leading automotive aftermarket trade fair for the United States, and using that as the starting point for the pending 60th Anniversary of Associated Electrics (1964) and 40th Anniversary of the RC10 (1984) they have created some a little special. To pay homage to the RC10, they decided to make a special display piece, and since AE know its racers love the SLA prototype race cars they have shown over the years, they decided to make an RC10 version the same way. Utilising the RC10 Classic SolidWorks models, they were able to produce crystal clear parts. They have also kept the chassis, nose plate, motor plates, and shocks silver to give that prototype feel and awesome wow factor.

View more images here

October 21, 2023

Bittydesign P10R 1:10 Rally body shell

New from Italian body shell manufacturer Bittydesign is the P10R 1:10 Rally body. Universal, it mounts on all 1:10 190mm models, both touring car chassis as well the ones created specifically for the rally category and is compatible with Tamiya TT-02 chassis in all its variants. Made with high quality and genuine polycarbonate 0.75mm Lexan it comes with a complete set of screw, nuts and large plastic washers to fix properly the rear big wing and is sold clear with protective film outside and a pre-cut decal sheet and windows masks. Resembling the Ford Puma WRC, the design phase took several months to refine every detail, the attention to detail was obsessive in order to propose a body that could best optimise aerodynamics and at the same time remain real in proportions and aesthetics.

View more images here