July 4, 2024
Schumacher has released two updated ‘V2’ versions of popular items for their LD3 2WD Buggy and ST2 2WD Truck. A new V2 version brass pivot block becomes the heaviest of the optional blocks in the material now weighing 30 grams rather than the original 40 grams. V2 Alloy 5 Deg yokes increase durability over the plastic kit version and include adjustable lock stop screw, which can accurately enable you to set steering lock. Source: Schumacher [racing-cars.com]…
July 3, 2024
…adds style to your B7, but much needed strength. Included in it are a 7075-T6 Aluminium Motor Mount, a One-Piece Servo Mount, and a 0° Bulkhead with 4 tapped holes with set screws to remove any slop through wear. A new Rear Ball Stud Mount raises the ball stud +2mm so you don’t have to run as many ball stud washers, keeping your ball stud bent free. Their Arm Mount D HD is beefed up on the sides for extra strength. In addition to the visual parts, Avid are also offering a range of hardened hinge pins. Source: Avid [avidrc.com]…
July 3, 2024
…printed bumper. Produced using thermoplastic polyurethane for optimal strength and flexibility, the FlexBumper absorbs hits better and doesn’t transfer them as much into the chassis structure. More robust and sturdy, it always goes back to original shape and don’t drag on the floor after a crash. The MXLR FlexBumper for the AT1, AT1S, XQ1, XQ10, XQ10R, XQ11, XQ1S, XQ2S, XQ3S matches the original footprint, but with a lower overall profile! It’s a direct replacement for the kit foam. The lower overall profile helps to keep the weight in an acceptable range with it coming in at 9.8grams. Source: MXLR [maexler.com]…
July 2, 2024
…tools or complicated procedures to adjust the clutch and it can be easily assembled and set without any tools, allowing for quick and hassle-free setup. The new clutch system comes with 3 preload adjustments on the front plate to fit any type of ground and engine output. You can change the spring preload on the front plate from H to M and to L (High, Medium and Low position). The 1.1mm spring was introduced (available as an optional part) to further increase the number of setup combinations to best suit your driving style and track conditions. Source: Reds Racing [reds-racing.com]…
July 2, 2024
…for innovation, style and commitment to excellence align perfectly with 1up Racing’s mission to deliver world-class products to our customers.” On his move to 1up Racing Epp said, “I can’t wait to get started!,” Eric said about the new position. “I’ve watched Randy grow this brand from simply selling battery tape and grease into the ultra-cool, wide-reaching, attractive RC brand and media company that it is today. Getting to work with both Randy and Joe Pillars to grow the 1up brand is super exciting. The sky’s the limit for 1up Racing with this group of talent.” Source: 1up Racing [1upracing.com]…
July 2, 2024
…that can respond to all kinds of road surface conditions. There is also a Rear Roll Post Type B that does not fasten the rear roll post to the top deck with screws, and allows natural chassis flex without losing chassis pitching rigidity and roll rigidity. Combined with the front roll post, it provides a higher level of mechanical grip. Finally the Japan manufacturer has added 6mm ball bushing O-rings. These O-rings secure the 6mm ball bushings for the TC10/3 front and rear lower suspension arms, replacing C-clips and improving road gap travel for a smoother ride. Source: Axon [team-axon.com]…
July 2, 2024
Yokomo is now offering its larger 2.2-inch wheels for its YZ870c vintage 4WD Buggy in florescent yellow. The YZ-870C’s distinctive wheel hubs are retained, but the wheel outer diameter is increased to allow the use of 2.2-inch size tyres, which are widely available on the market today. This greatly expands the tyre options for both dirt and carpet surfaces, allowing you to enjoy driving with increased grip. The wheels do not have air holes, so require drill holes using a taper reamer or similar tool. Source: Yokomo [teamyokomo.com]…
July 2, 2024
…the 2WD Buggy. The Retro-Mod Buggy Body is a nostalgic throwback that pays homage to the golden era of RC racing. The body design captures the essence of classic RC aesthetics while incorporating modern engineering and performance enhancements. Perfect for enthusiasts and collectors alike, the Retro-Mod Buggy Body brings back the iconic style of yesteryears, reminding us of the roots and rich history of RC racing. Each body is sold clear and ready for paint with included window masks with wings sold separately and its is compatible with the Team Associated RC 10B6.1, RC 10B6.2 and RC10B6.3. Source: LFR [leadfingerrc.com]…
