The recent 2016 Team Associated Off-road Championships were held at Trackside R/C in Brookfield, Wisconsin and in the 13.5T 4WD class it was Paul Ciccarello who grabbed the overall TQ after taking round TQs in three of the qualifiers. Paul would then also come out on top in the opening two A-mains to take the overall win from teammate Kyle Gannon.
Source: Serpent [serpent.com]
MCD Racing have introduced an aluminium carburettor insulator for the Zenoah G320 engine. The aluminium construction fixes flexing issues associated with the standard composite part that can overheat during long runs. In addition the alloy part utilises two composite bushings that help with isolation for an overall better performing assembly and thus engine. Available are also separate sets of temperature plates and gaskets.
Traditionally December is VRC Worlds month. Not only the annual (RC) holiday season, but surely the most anticipated month in virtual RC racing. Thousands of racers from all over the world are now preparing for the VRC Worlds. This year VRC will introduce a new class – Rally X – and VRC will kick of the VRC Worlds with the very first World Championship for Rally X on November 29th. This class is based on the 1/8 electric buggies with lowered suspension, special wheels and tires and of course special Rally X tracks.
MCD Racing’s popular Astro-Max tyres are soon also available in a 180mm diameter variant. Designed for astroturf tracks, the tyres offer an asymmetrical design with one sidewall featuring added ribs and an increased number of outside row pins while the other side offers a plain sidewall and less pins. This allows to adjust the corner characteristics and side bite to your liking. The tyres are meant to perform especially in wet conditions and they are available in white medium compound as tyres with inserts only or including disc wheels.
Revolution Design Racing Products have introduced a titanium front axle set for the Team Associated B6-series of buggies. The parts are a direct replacement for the standard aluminium axles and thanks to the Grade 5 titanium material the axles are both lightweight and tough, making them the ideal choice for hardcore racing. Included comes an aluminium shim set to adjust the track width in a ±1mm range, allowing to adapt the steering feeling and side bite to your likings. The design of the axle furthermore makes using an “outlaw” setting possible for all non-sanctioned racing classes such as open club racing. Running the buggy in the widest configuration further enhances the overall steering and grip created.
The Silverstone RC MCC venue in Northhampton played host to round two of the BRCA Micro Nationals this past weekend. It was a cold November morning and the drivers were greeted with a twisty technical track, with a few jumps and added features to keep even the best drivers on their toes. Ben Cosgrove went on to take TQ in rounds three and four and this meant that he was tied on points with Phil Sleigh for the TQ battle. Ben had the fastest round time so that would give Ben the overall TQ. The A-main would be a close fought affair with the overall win going to Ben Cosgrove with Phil Sleigh in second and Eugene Galley third.
Coming from Shepherd and made for the Velox V10 are 1mm shorter wheel axles for the standard CVD driveshafts. Complementing the respective dogbone-specific parts introduced earlier this year the high-quality and hard-coated 7075-T6 aluminium axles have a 1mm shorter wheel hex which allows the use of different offset rims. Furthermore the shorter wheel axles give a different setting of the front and rear end geometry resulting in a longer arm while still being within the allowed 200mm maximum width. The -1mm CVD wheel axles are available in sets of two from now on.
Source: Shepherd [team-shepherd.com]
JConcepts have introduced the Fin 0mm offset spring cups for the Team Associated B6-series off-road buggies. The cups are a 0mm off-set which is a popular setting on the rear of the Team Associated B6 and B6D. The aluminium material comes anodised in either blue or black and provides a healthy footing for the hot new spring of choice or the trusty stock AE spring set. The cups feature a unique shock shaft path which helps lock the spring cup in position during hard crashes or collisions. Finishing the parts off is an etched off-set identification and JConcepts.net logo.
View the black colour cups here
