Turkish large scale specialist manufacturer MCD Racing has released a new rear bumper for its Duox 1:5 gas-powered touring car kit. Developed and extensively tested, this bumper prevents body entrapment in the tire and protects the entire rear of your car. With its robust construction, it ensures maximum strength and durability. By assembling the rear bumper to the chassis, you have to remove the rear crash bar from your *TCA/TCB/TCN bodyshell.
Better known for their onroad racing heritage, Italy’s BMT has released its new 802 PRO 1:8 competition buggy. Compared to its predecessor, the 801, the 802 PRO gets new differentials, new engine mounts and a new 34mm clutch. The buggy features a new radio plate with adjustable battery position and a new servo saver with ergal plate. Finishing off the main updates is a new bodyshell.
Following on from the signing of former Large Scale World Champion Russell Grenenger last month, Hong Nor has announced that former front running nitro onroad racer Mirko Morgenstern has joined their team. The German driver will campaign Hong Nor’s electric GTSe ’23 1:8 GT chassis and commenting on his move to the team said, “I’ve been watching Hong nor for a while. The Gruber-Racing team has done a great job over the last 2 years and has consistently placed the chassis further ahead in the races. in addition, the development of the chassis is really great. After a few talks with team manager Pasquale Kögel, who explained the chassis to me in more detail, I made everything clear with team boss Toni Gruber I’m also looking forward to the time with the GTSe ’23 and hope for maximum success.”
Source: Hong Nor [hongnor-racing.com]
Czech brand MIBO has introduced the Electric Bubble Puller, a practical tool for every RC car racer. It is designed to create a vacuum and pull all air bubbles from your damper or differential oil with a push of a button. Just connect a power supply or battery and you are almost done. With practicality in mind, 2 variants were selected to fit most racers. Even those, who race in more than just one class, can have just one vacuum pump. Two variants of the Bubble Puller are available with one intended for 1:10 racers, both onroad and offroad, and a large version for offroad racers for both 1:10 and 1:8 use. Both of them have a compact, quality design and reliable operation, which simplifies the process of removing air bubbles, making it quicker, easier and more effective. Using an electric vacuum pump for removing air bubbles from RC car damper oil offers several advantages. It helps prevent foaming and cavitation, which can lead to unpredictable suspension behaviour and reduced damping effectiveness and also improves their performance and responsiveness. The package also includes a quality case, ensuring the protection of the pump during transport and storage.
Having launched their new IF14-2 Team Edition at the end of 2022, Infinity has added an 84 piece titanium and aluminium screw set to its parts listing. Titanium is used on the underside of the chassis where strength is required. Aluminium screws are used on the upper surface of the chassis to reduce weight and lower the centre of gravity. The use of aluminium screws also optimises the rigidity balance and flex characteristics of the entire chassis. The upper screws are finished in red colour reflecting Infinity’s branding.
Source: Creation Model [creationmodel.net]
In the latest release of the Beretta body range, US offroad bodyshell manufacturer Leadfinger Racing has introduced a variant to fit Agama’s N1 along with a front wing for the buggies unique front suspension design. The Beretta was developed in mind to give the N1 an aggressive look that would reflect chiseled body lines and deliver a dominating stance unlike any other body on the track. After the first prototype was revealed, the new look surprised Agama fans and complemented the one-of-a-kind characteristics of N1’s unique design. Starting at the top, the cab has been lengthened to better fit Agama’s stock air filter while offering plenty of room for racers to use an aftermarket filter of their choice. To provide a more streamlined look, Leadfinger slightly raised the front and the rear posts with the included spacers and 3mm screws. This allows the body to flow evenly front to back without sacrificing the Beretta’s low-profile design. The enlarged cut lines also allow better clearance for both pairs of shocks. One of the biggest attributes and most noticed is Leadfinger’s front wing (sold separately). This new wing design not only adds aerodynamics but protects the springs form scratches and dirt build up. No need to be concerned about longevity, Leadfinger has backed their design with the correct thickness for maximum durability.
JConcepts has introduced their Swiper tyre which has been in development since 2021 and is intended for 1:8 Dirt Oval racing. Designed to compete on dirt oval track surfaces which require a hefty treaded tire that can go the distance, the Swiper tyre can pull double duty for SCT based vehicles and 1:8 buggy inspired dirt oval vehicles in a variety of conditions. The 2.2 x 3.0” bead-based diameters work well with all SCT wheels and JConcepts own wheel specifically designed for 1:8 dirt oval vehicles. The profiled carcass is advanced with deep pads of directional tread poised to bite specific surfaces. The platform has a heavy center bar section of tread that provides openings and can help drive a vehicle in wet or slightly loamy conditions. The side tread is equally spaced, grooved and cut to slice through the dust, marbles, and small debris associated with dirt oval racing. The inner carcass includes ribbing to help brace and support the lower end of the sidewall while a specially built firm closed cell insert supports the upper sidewall and top of the carcass. The Swiper tyre is available in blue (soft), Aqua A2 (medium soft long-wear) compounds. The included Dirt-Cell insert is a harder based material, stealth black in colour, with minimal sculpting to provide the most amount of support for increased durability and drive-ability.
Source: JConcepts [jconcepts.net]
A new international outdoor electric onroad event has been announced for the calendar in 2023 with the inaugural running of the Electric Singapore International Challenge on September 9-10th in Singapore. The RCMC Singapore Club, along with top international racer Nicholas Lee and Chhua Joo kiah are looking to bring back the racing in style with the creation of one big exciting weekend for the on-road racers. A venue that proved hugely popular with racers and multiple World champions having visited and raced in the past. The big flowing outdoor track is located in the East Coast, near to the World famous Changi airport. The story of the inaugural event is set to be shared with the world as it unfolds with Inf1nity sponsoring and supporting the event. The World famous Scotty Ernst is also set to be on the microphone for this race. The E-SIC will see 4 classes in action; 1:10 Modified, 1:10 13.5T Boosted, FWD 17.5T Blinky and 1:5 Superbike. So save the date, September 9-10, 2023, and get ready to be part of this exciting chapter in Singapore’s racing history.
Source: E-SIC
