Red RC

July 19, 2016

Mara & Götzl successful at Czech Open Rd6

Round six of the Czech Open series was held at the Horni Jeleni track this past weekend. Jiri Mara (Serpent) grabbed the pole position for the Nitro Buggy main final with Max Götzl (Xray) on the 2 spot on the grid. Right from the start of the main both were in a close battle for the top spot but in the second half Max started to make some mistakes, allowing Jiri to stretch the lead and to bring home the win in front of Max while Tomas Kapicka (Kyosho) completed the top 3 result. With the second place Max Götzel would take the win in the Junior ranking from Fanda Kalenda and Milan Mudra (both Xray).

View the final results and the Junior podium here

July 19, 2016

Jan Ratheisky doubles at TOS Vienna

Last weekend’s Tonisport Onroad Series Austria was held at the 1. MRC Wiener Neustadt track in Vienna. The event attracted about 80 entries with both local drivers and also guests from abroad attending in several electric on-road classes. In Touring Stock and Formula, Xray’s Jan Ratheisky was the man to beat as he claimed the top qualifier position in both categories and he also brought home the win with Toni Matteo (Tamiya) and Nikolai Måheim (VBC Racing) coming in second and third respectively in the Touring Stock class while the Formula podium was rounded out by Andreas Stiebler (Xray) and Matej Dobnikar (Xray).

View the Formula class podium here

July 19, 2016

Arrowmax black & gold V2 tool base

Arrowmax have introduced their new black and gold coloured V2 tool base. The version 2 incorporates slots for Arrowmax’ popular multi shock clamp and the V2 turnbuckle wrenches along milled-out holes to hold various 22mm, 18mm and 14mm tools. Overall a total of 24 tools and wrenches can be stored on the pit table with the new variant coming in a luxurious black and gold finish, matching Arrowmax’ respective Anniversary tool range.

View another image here

July 19, 2016

Serpent Cobra GT Nickel-coated clutch bell

Coming for Serpent’s nitro-powered Cobra GT cars is a Nickel-coated 2-speed clutch bell. Made from lightweight 7075-T6 aluminium and sporting a Nickel plating the clutch bell is about 60 percent lighter than the standard steel version, scrubbing valuable rotational mass for improved acceleration. The CNC-machined bell features precision-machined bearing fits and it can be used with alloy, the original black or the new yellow clutch shoes as well as a mix of those.

Source: Serpent [serpent.com]

July 19, 2016

Saheeb & Hong win at Singapore EP Buggy Nats Rd4

Round four of the Singapore Electric Buggy National Series was held at the city-state’s downtown Urban PlaySpace track this past weekend. In the 4WD class, Dennis Chiang (Xray) took the provisional TQ, before an EFRA-inspired SuperPole shootout gave the pole position to young China-based racer, Koh Boon Yang (HB Racing). In the finals, each of the four rounds that were held before the rain came produced different winners with the top 4 drivers all being tie on points. Ultimately Ismail Saheeb (Xray) was declared the overall winner on a tie-break, with Dennis claiming second, and Boon Yang finishing third.

Continue reading the report here

July 19, 2016

Jörn Neumann wins final West Division Offroad regional

The final round of the German West Division 1/10th Off-road regionals, qualifier for the Nationals, was held at the RCRT Duisburg track. A pretty big track for 1/10th scale buggies the lap times were in the 38 to 39 seconds region and most drivers opted to run rear motor cars in the 2WD class. One of the few drivers to campaign a mid motor vehicle was Jörn Neumann and he pretty much dominated the field by taking all three qualifiers and also the opening two 15-car A-mains to grab the day’s win from Patrick Fischer (Team Associated) and Thorsten Schmitz (Serpent).

Source: Serpent [serpent.com]

July 19, 2016

Exotek DEX410v5 wing mount set & front diff hoop

Exotek have introduced two new aluminium option parts for the Team Durango DEX410v5 off-road buggy. First up is a heavy duty wing mount set that matches the stock geometry. Machined from 7075 aluminium and coming black anodised the extra strong wing mounts will withstand the rigours of racing while also adding some visual impact. The parts work with the stock wing spacers and also fit the DEX210F. Also new is the heavy duty front gearbox holder for the Durango DEX410 series. A must have for high-power applications the diff hoop is made of 7075 alloy for greater durability and it comes polished and anodised in black.

View the other new parts here

July 19, 2016

VP Pro 1/8th buggy tyre holder

Coming from VP Pro is the Tyre Collector for 1/8th scale buggy wheels. Made from aluminium and designed to hold all industry-standard 17mm hex rims the tyre holder helps to easily and conveniently store tyre without having to worry about mixing them up. The tool comes black anodised and with laser-etched VP Pro markings.

Source: VP Pro [vp-racing.com]