Red RC

July 7, 2016

Exotek introduce new TLR 1/10th option parts

Exotek have introduced a range of option parts for the Losi XXX-SCT and TLR 22-4. First up is the 12mm front hex and hub conversion kit for the XXX-SCT 2WD short course truck. The front conversion allows to use the stock rear 12mm hex wheels on the front but also the mounting of Associated SC5M or Traxxas Slash front hex wheels on all four corners of the XXX-SCT. The set includes 7075 alloy hubs with trailing spindle design for improved drivability, it also comes with hard steel axles for maximum durability and four rubber-sealed bearings. The set is rounded out by 2mm alloy spacers to adjust overall track width.

Continue reading here

July 7, 2016

Shepherd Velox V10 -1mm dogbone wheel axle

Shepherd have introduced a new option part for the Velox V10. The new dogbone wheel axle has a 1mm shorter wheel hex part which allows the use of different offset rims. Furthermore the shorter wheel axle allows to run a longer arm setting in order to achieve a different rear end geometry, while still being within the allowed 200mm maximum width. The wheel axles are available in a set of two from now on.

Source: Shepherd [team-shepherd.com]

July 7, 2016

Swiss Racing Cup Rd5 & Rd6 – Report

Round five and round six of the Swiss Racing Cup were recently held at the Sitterdorf track. In the 1/10th 200mm class, Patrick Fankhauser (Xray) qualified on the 4 spot during Saturday’s round five, but winning the semifinals allowed him to grab the pole position for the A-main that then saw Patrick being under pressure of TQ holder Philipp Buehler (Xray). Positions swapped due to a small mistake by Patrick but swift refuelling by his dad got him back into the lead that he would hold onto until the end to take the day’s win from Philipp Buehler with Michael Schäfer (Xray) completing the top 3 result.

Continue reading the report here

July 7, 2016

BRCA 1/8 Circuit Nationals Rd5 – Report

The fifth round of the BRCA National series took place last weekend at the Cotswold Model Car Club, returning to this track for the second time this season. For the first time in quite some time the weather at Cotswold was to remain warm and dry for the weekend ahead. During Saturday’s practice the grip was quite low in the morning with some drivers struggling to get a reference point for setup, but the track came good by around midday and allowed the drivers to start working on their car setup. Mark Green was setting the pace with the usual pack of drivers closely edging towards his pace. Sunday morning headed into the qualifying which was dry and most drivers managed to get good clean runs in every round. After four rounds of qualifying the Nitro A-final saw Mark Green taking the pole position from Tim Wood and Andy Hastings.

Continue reading the report here

July 7, 2016

Boots takes opening qualifier in Spain

Elliott Boots has TQ’d the opening round of qualifying at the 1:8 Offroad European Championships in Redovan, Spain. The reigning champion was fastest over the first of the five 5-minute qualifiers from fellow British driver Darren Bloomfield, the former champion just under a second off the Kyosho driver. Turning out to be an all Champions affair at the top of the time sheets, former back to back champion David Ronnefalk would post the third fastest time followed by former double champion Robert Batlle. Having topped seeding yesterday Daniel Bernabe would struggle in the opening qualifier with a combination of running on new tyres that left him with an aggressive car and not getting the set-up on his SOAR correct for today’s cooler overcast conditions. The Spaniard would also have a 4-second mistake on his last lap. This left João Figueiredo to be the surprise of Q1 with last year’s Euro B Top Qualifier getting a P5 ahead of Neil Cragg who completed the Top 6.

Continue reading this report here or view our complete event coverage here.

July 7, 2016

Carlos Manuel wins at Portuguese IC Track Nats Rd4

Round four of the Portuguese Nitro On-road Nationals was held at the Pista das Travessas in Sao Joao da Madeira. Carlos Manuel would take the TQ after troublefull qualifiers with the Superpole being won by young Tomas Andrade. With track temperatures reaching 60 degree Celsius tyre wear was very high and a new set of tyres only lasted about 15 minutes. The main final was then dominated by tyre tactics and it was the pole setter who made the best out of the conditions, setting flying laps in the first 15 minutes to get enough margin on the second placed driver to change all four tyres. At the end Carlos would bring home the win three laps ahead of runner-up, Hugo Mendes with Tomas Andrade rounding out the top 3 result.

View the final results here

July 7, 2016

Benes, Novotny & Korinek win at Offroad Party Rd4

Round four of the Czech Offroad Party series was held in Kolin over the weekend. In the premier 1/8th Nitro Buggy class Xray’s Frantisek Kalenda would take the TQ after the qualifiers and starting from the pole position into the triple 10 minute A-mains, Frantisek looked to bring home secure wins but technical issues in A1 and A2 made way for Jiri Benes (Xray) with Lukas Resetar (Xray) coming in second. Frantisek Kalenda had to settle for third overall.

Continue reading the report here

July 7, 2016

Simon Kurzbuch successful at Swiss Nationals Rd4

The fourth round of the Swiss Nitro On-road National Championship was held at the MRC Langenthal club that also celebrated its 40th anniversary that weekend. After four rounds of qualification once again it was Simon Kurzbuch claiming the TQ spot in the 1/8th class. In the main final the reigning World Champion continued to show a strong performance as he crossed the finishing line some two laps in front of Silvio Hächler with Ali Renato securing himself the final podium spot another seven laps down.

Source: Shepherd [team-shepherd.com]