Red RC

July 6, 2016

Patrick Hofer wins Swiss 1/8th Buggy Nats Rd5

The fifth round of the Swiss 1/8th Buggy Nationals was held at the ORCM club in Montagny. The weather conditions were pretty challenging with heavy rain on Saturday and burning sun on Sunday, meaning the track surface would break up, revealing loads of stones on the racing line which made car setup pretty difficult. The A-main event was highlighted by the engine flame-outs of various drivers and with about 10 minutes to go, the race for the win was a 2-horse battle between Patrick Hofer and Joachim Kallen. Both raced nose to tail with Joachim in front, fending off all attacks by Patrick. Then, in the last corner of the final lap, Joachim’s engine stalled “LeMans 2016 style”, handing Patrick the win in an exciting final.

Source: Team Associated Switzerland [facebook.com]

July 6, 2016

Surprise as Bernabe tops Boots in 1st controlled practice

Surprise as Bernabe tops boot in 1st controlled practice

There were a few surprised faces at the end of the first round of controlled practice at the 1:8 Offroad European Championships in Spain as the name Daniel Bernabe appeared at the top of the timing screen ahead of reigning champion Elliott Boots. A former European Semi Finalist, Bernabe would take his SOAR to the fastest 3-consecutive laps in the first of the two seeding rounds by just 6/100th of a second from yesterday’s free practice pace setter. Behind them 3/10th back, David Ronnefalk would complete the Top 3, the Warm-up Race winner finally showing some strong form around the massive RC Redovan track as he posted the fastest lap with a time of 52.654.

Continue reading this report here or view our complete event coverage here.

July 6, 2016

Ruddog RP120 sensored brushless speed controller

Ruddog Distribution have introduced their all-new RP120 sensored brushless speed controller for 1/10th scale applications. Rated at 120A and sporting an aluminium case the ESC is designed with both on-road and off-road racing in mind. The integrated heavy-duty switch minimises wiring and several timing and turbo functions, programmable using an optional programming box, give extra performance for boosted racing classes. The controller comes including a replaceable receiver wire, capacitor board and all-black power wires.

View the features, specifications and more images here

July 6, 2016

Yokomo BD7 high-torque rear drive belt

Available now from Yokomo is the high-torque rear drive belt for the BD7 touring car. Made from a new high-strength material the belt will not only last longer than the standard part but also improve acceleration out of corners as it is less prone to stretch and skip.

Source: Yokomo [teamyokomo.com]

July 6, 2016

Modify T4’15 & ’16 centre balance weight

Modify T4'15 & '16 centre balance weight

Japanese brand Modify have introduced their new centre balance weight for the Xray T4 2015 and 2016 kits. Weighing in at 20g the weight is fastened along the battery and electronics compartment using already existing holes in the chassis plates of both cars, allowing to easily install or remove the part in seconds. Sitting on two low-profile pods the weight also only has minimal influence on chassis tweak and it comes in a stealthy black finish.

View more images here

July 6, 2016

T-Works RX8’16 titanium & steel hardware sets

T-Works RX8'16 titanium & steel hardware sets

New from T-Works come several hardware sets for the Xray RX8’16 1/8th on-road car. First up is the 64 titanium turnbuckle and anti-roll bar ball end set. Included are two steering and two rear camber link turnbuckles as well as four anti-roll bar ball ends, all made from high-quality titanium and designed to replace the standard steel parts. The set makes for an overall lower weight and added “bling”. Included is also a suitable 4mm turnbuckle wrench. Also new and made for the RX8’16 is a 140-piece 64 titanium screws set and a 100-piece gold-plated steel M3 screw kit. The titanium kit will significantly lower the overall weight while the gold-plated screw add visual impact while retaining weight.

View the other new sets here

July 6, 2016

Ping, Law & Yeung take 2016 Chinese Offroad titles

LRSat-Track-1

Following the conclusion of the onroad section of the Chinese Nationals, the attention then moved to the action taking place on the offroad track at the ARC International Raceway in Xiamen. With the weather calling for extreme heat and humidity, unlike during the onroad action there was no rain allowing the race to be run without interruption. After 2 days of intense competition, we had 4 new National champions crowned.

Continue reading the race report here

July 6, 2016

Velder wins at Benelux Buggy & Truggy Masters Rd4

Round four of the Benelux Buggy and Truggy Masters was held at the astro track in Appingedam in the north of the Netherlands. Due to a rainy week before the race, the track was in pretty beat up condition as it was dirty, slippery and soaked, meaning on Saturday only limited practice was possible. But come Sunday morning the track conditions were ok to race and the opening qualifier was held in slippery but dry conditions. Unfortunately after heat 1 it started raining again, making the remainder of the day the wheeled equivalent of boat racing. The TQ in the worse conditions was taken by Jarno Pijpers ahead of Jordy Velder and Bart Mullink.

Continue reading the report here