Red RC

May 11, 2016

Ruddog RP540 sensored competition brushless motors

Available now from Ruddog Distribution are the RP540 sensored competition brushless motors. Made using the latest technologies in terms of development and production the motors weigh in at a lightweight 170g and they are utilising high-grade materials including Japan-made steel stator plates and 99.9 percent high-temperature pure copper wire. Large, machined openings in the all-aluminium can improve cooling and provide constant performance over the entire runtime, even under the hottest of conditions. Furthermore the motors feature pre-shaped heavy-duty solder tabs, adjustable timing and they are available in a range of windings including 4.0T to 8.5T modified and 13.5T to 21.5T stock variants.

View another image here

May 11, 2016

Dirt Racing Products Dirt Bands tyre gluing bands

JConcepts have introduced the yellow-colour Dirt Racing Products Dirt Bands rubber tyre glueing bands. A uniquely moulded design, specifically developed for tyre mounting, the rubber band is produced in a high-elasticity material capable of stretching to a full assortment of different sized tyres including 1/10th, SCT and 1/8th buggy tyres. A finely detailed array of ergonomically shaped handles allows the user to adjust the rubber band to the sidewall of each tyre to apply the pressure where it is needed. The Dirt Bands are coloured in Dirt’s signature yellow colour and will include four bands per package.

Source: JConcepts [jconcepts.net]

May 11, 2016

VP Pro Electric Tool Holder tray

VP Pro have introduced their Electric Tool Holder tray for the use with tool tips found on electric-powered rotary tools. A common sight especially in 1/8th scale racing the rotary tools allow for swift and easy tool tip changes and this is were VP Pro’s tool holder tray steps in as it holds up to 24 different tool tips along with a glow igniter and also two quick-change handles. The tray measures 142x58x16mm and it is made from lightweight yet durable black-anodised aluminium. Laser-etched logos round out the high-quality look.

View another image here

May 11, 2016

Bittydesign Ascari 190mm touring car bodyshell

Following several teaser images Italian company Bittydesign have introduced their all-new Ascari 190mm touring car bodyshell. Developed in cooperation with surface modelling engineers and car designers the body features an all-new look with performance to match. With a focus on consistent steering, thanks to the stepped front-end design, and balanced rear downforce, utilising a channeled roof and rear window section, the EFRA-legal body also offers high overall grip thanks to sculptured side skirts, making it ideal for both asphalt and carpet racing. It is made using lightweight 0.75mm Lexan material and it comes including window masks, decal sheet and lightweight wing mounting hardware.

View more images here

May 11, 2016

TLR 22-4 2.0 1/10th 4WD buggy – Coming soon

The latest TLR vehicle to receive a year 2016 treatment is the company’s somewhat ageing 22-4 1/10th 4WD buggy kit, according to several leaked images and an official announcement. No details are known yet but it is understood that the kit will feature updated front wishbones for increased durability while the rear end received a make-over with a new aluminium camber link plate sporting vertically mounted inner camber ball studs for easy roll centre adjustments. It is also highly likely that the 2.0 kit will take a shorty LiPo pack right from the box and it may also feature revised front and rear differentials. All information about features and specifications will become available on the 12th of May.

Source: TLR [tlracing.com]

May 11, 2016

Hobbywing WiFi Express module

Hobbywing have introduced their new WiFi Express module for the use with the Xerun and Ezrun range of brushless speed controllers. Used in lieu of the LCD Programming Box the device allows for easy setting changes of the controller’s software using an iOS or Android-based mobile device while also giving access to the data logging feature of the XR10 Pro speed controller. On top of this the module makes for easy firmware updates to stay up-to-date with the latest releases. The device is powered by the controller’s build-in fan port, it measures 25.7×25.7×8.8mm and weighs in at only 11g.

Source: Hobbywing [hobbywing.com]

May 11, 2016

Exotek XB2 optional rear suspension holders

Coming from Exotek and made for the XB2 2WD off-road buggy are new rear/front brass and rear/rear aluminium suspension holders. Starting with the RF suspension mount, the part is machined from heavy brass material to add 18 gram of weight in front of the rear axle. Doing so will add traction and stability when track conditions call for it with the mount sporting a protective black coating while remaining the stock geometry. The RF mount is usable on both the Carpet and Dirt Edition kits.

Continue reading here

May 11, 2016

Hanna, Mitch & Bernard win at Force Series Rd2

Round two of the Force Series was held in Perry, Florida at Blue Rock Raceway. With other races being scheduled at the same time, the turnout was uncertain, but the Force Series didn’t disappoint on Saturday with a total entry count over 125. The Blue Rock track conditions, a mix of hard packed blue groove areas with some dust mixed in, stayed about the same for round one of practice but the mains saw an increase of more dust at the beginning and it tapered off as the sun would fall and the race finished under the lights. Both A1’s for E-Buggy and E-Truggy saw JR Mitch and John Bernard both found wins, but it was only John who came back in A2 with a win, as Griffin Hanna won A2 in E-Buggy which gave him the overall win.

Continue reading here