Red RC

May 10, 2016

Rick Vrielijnck wins opening Dutch 1/8th national

The opening round of the Dutch 1/8th Nitro On-road National Championship was held last weekend at the Real 80 track in Groningen in the North of the Netherlands. 51 drivers where welcomed with sunny weather conditions which lasted the whole weekend. This year the Dutch championship is run under a different racing format. Both (Premier) NK and (secondary) Nomac class, drive together in a combined “ABC” system. After the combined race, seperate championship points are given to the drivers in their respective class. After qualification all drivers are divided in this ABC system, and per lower final 2 bump up spots are available for the 2 fastest drivers to bump up to the next final. Because of this system, there where very nice battles in almost al lower finals to be seen between drivers fighting for these 2 bump-up spots. After all finals where run, Rick Vrielijnck won the A-Final, and came out as winner of the premier NK class. 2nd spot went to Joey Sorber, and 3rd to Jeffrey Rietveld.

View more details here

May 10, 2016

X-Race Grand Final report

The Xray X-Race Grand Final was held last weekend at the company’s on site facility, the Hudy Arena and Alexander Hagberg gave this report. ‘Great weather, and a great atmosphere as always, gave the racers that came to Trencin this past weekend a really enjoyable experience. Drivers were able to compete in 6 different categories, at the beautiful Hudy Arena outdoor circuit! Practice ran all Friday, with qualifiers on Saturday, and finals on Sunday as always.

Continue reading the full report here

May 10, 2016

T-Works SRX8 turnbuckle set

T-Works have released this complete set of turnbuckles for the new Serpent SRX8 1/8th scale buggy. Made from titanium, they replace the standard kit versions and offer increased strength and lower weight. The set includes the 4 upper links, as well as the steering links and the servo link. Also included are two turnbuckle tools, in 4mm and 5mm, to work with the supplied turnbuckles.

Source: T-Works [rc-tworks.com]

May 10, 2016

Blitz GSF-II 1/10 190mm TC body

Team Titan Blitz have introduced the Blitz GSF-II 190mm 1/10th sedan body. Building on the characteristics of the original GSF, the GSF-II has been further refined to provide outstanding steering response and increased stability. The updated aerodynamic design provides a noticeable increase in stability both on and off power while the improved steering response provides more accurate handling, which makes the GSF-II suitable for both asphalt and carpet racing on all traction conditions. Supplied with reference marks for the ARC R10 and R11 chassis, as well as standard markings to allow you to mount onto all other brand chassis, it meets the 1/10 190mm GBS body rule and is FEMCA approved. Available in standard 0.8mm, lightweight 0.7mm, as well as a super lightweight 0.5mm version. Supplied unpainted with protective film, window mask, wing mounting hardware and sticker sheet.

View more images of the GSF-II here

May 9, 2016

Yaniv Sivan takes 6th Isreali title with Rd10 win

The 10th and final round of the Israeli League took place this past weekend at the Ein Vered racing track. With great weather Yaniv Sivan took the TQ spot ahead of fellow Kyosho drivers Omer Assayag and Ofir Avitan. The A final saw a big battle between Yaniv Sivan, Omer Assayag and Italy Eskenazi but after 10 minutes both Omer and Itay retired due to technical issues. Meanwhile Ofir Avitan who had a bad start took the second position with Gil Harush and Tal Siles in 4th after a flame out. After 40 minutes of thrilling battles Yaniv Sivan won with Ofir Avitan 2nd and third going to Tal Siles which managed to pass Gil in the final minutes. This would seal the title for Sivan, his 6th in total, with Ofir Avitan ending the series as runner up, while Tal Siles finished 3rd.

View the final series results here

May 9, 2016

2016 Victorian State Titles report

Last weekend saw over 190 entries converge at the Keilor Club in Melbourne, Australia for the 2016 Victorian Titles sponsored by JConcepts Australia. Racers were treated to an outdoors track with a combination of high speed sections, elevation changes and a huge triple jump, with a natural clay surface that grooved up through the weekend providing great racing. The JConcepts 3D tyre was chosen as the control tyre for all classes. The weather was perfect for practice and 2wd day with sunshine and 26C temps, however mother nature won on Sunday with heavy rains cancelling the 4wd portion of the event. The entry list was stacked with 7 of the 2015 Nats A finalists in attendance and entries from all around Australia, including 2014 National champs Josh Pain and Chris Sturdy, as well as the Queensland young guns Mitchell Steer and Alex Bernadzik.

Continue reading the report here

May 9, 2016

Robert Pietsch wins Hot Race Nitro Cup

The Hot Race Nitro Cup took place last weekend in Gubbio, Italy, the host of this summer’s 200mm World Championships. Using the same handout Hot Race tires as those to be used at the Worlds a lot of drivers used the event to gain knowledge on the track and tires.Qualifying would see former 1/8th World Champion Robert Pietsch take the top spot in qualifying with his Picco powered Mugen, ahead of the Tesla powered Capricorn of Dario Balestri, with super fast French race Leo Arnold with his Orion powered Xray in 3rd. Unfortunately the rain arrived before the finals could be won and so the even was called on the qualifying results. In the two support classes it was Roberto De Cesare that won the 1/8th class, which was run in the wet, while in the 1/10th National class the win went to TQ man Federico Iezzi.

Source: Hot Race [hotracetyres.com]

May 9, 2016

Samix Axial Wraith titanium links

More new titanium links from Samix, this time made for the Axial Wraith crawler. Machined from high-quality materials and coming surface treated and laser-etched the parts not only add strength while reducing weight but they also make for some visual impact at the same time. The links are available for the front and rear upper and lower as well as for the steering system and they are direct replacements for the stock parts.

Source: Samix [rcsamix.com]