Red RC

August 22, 2023

AGFRC Position Feedback Servos

New from servo manufacturer AGFRC is their range of Position Feedback servos. Beside the normal hobby servo function, these servos can provide position feedback via a potentiometer through the additional fourth orange wire, which is capable to measure the output angle directly. Available in two high torque 40Kg models and a 50Kg Super high torque high torque model, they all feature steel gear chain design for heavy duty application. Simply hookup the analog feedback wire to any Analog pin of Microcontroller. With this position feedback function, you can ensure the servo has reached its designated position or detect any potential impediments, of course, this allows additional closed-loop control from your controller. Enable for more complex robotics or industry applications, such as determining when the servo has reached its target, detecting when the output is blocked, or implementing your own higher-level closed-loop position control. Custom spec is acceptable.

View features here

August 21, 2023

Greiner defends German National title

Capricorn’s Dominic Greiner successfully defended his 1:8 Onroad German National title over the weekend taking victory over Lars Hoppe and Merlin Depta. Hosted at the track of MSC Kichlain in the centre of the country and with more than 50 drivers in attendance, it would be the Shepherd of Hoppe who would take the overall TQ from Greiner and the Capricorn of recent European Championship Top Qualifier Toni Gruber. The 45-minute final would see multiple European Champion Greiner take the win by one lap from Hoppe with Depta, winner of the Semi A Final, taking his Capricorn from P5 on the grid to 3rd after Gruber hit problems during the race.

Image: Lars Hoppe [facebook]

August 21, 2023

MXLR MTC2 / MTC2R FlexBumper

MXLR has extended its FlexBumper production line with addition of a model for the Mugen MTC2/MTC2R 1:10 Electric Touring Car. MXLR FlexBumpers are 3D printed with thermoplastic polyurethane for the optimal strength and flexibility. Over foam bumpers they absorb hits better and doesn’t transfer them as much into the chassis structure. More robust and sturdy, it always goes back to original shape and don’t drag on the floor after a crash. For the Mugen MTC2 / MTC2R it matches the original footprint, but with a lower overall profile as a direct replacement for the kit foam. The lower overall profile helps to keep the weight in an acceptable range. There are two MX logos on the backside to proof the originality. In terms of weight comparison, the MXLR FlexBumper is ~11,4g versus the original Kit Bumper at ~8,7g.

View more images here

August 21, 2023

3Racing Cero Sport 55

Hong Kong’s 3Racing has released an updated version of their entry level Cero Sport 1:10 Electric Touring car platform, the Cero Sport 55. The key update on the kit is the repositioning of the motor mount to the centre of the car meaning the same size belt is used front and rear. As a result of the new position the cat get a new motor mount and top deck. Also improved on the it in the centre of the Cero Sport 55 is an improved composite resin used in the manufacturing of the steering knuckles, which are common to all four corners of the car, and the bulkheads giving greater stiffness and durability.

View kit features & more images here

August 21, 2023

Boots crowned British Champion for 7th time

Having kicked off his British 1:8 Offroad Buggy title defence with a victory at the season opener at Herts back in May, Sworkz/Reds Racing team driver Elliott Boots wrapped up his 7th National title with a win at the season finale over the weekend. The 2-time European Champion and World Championship Top Qualifier, secured the TQ at the fifth & final round at Nemo Raceway ahead of Team Associated Neil Cragg before going on to take win number 3 of the season ahead of the Xray of William Skidmore and Agama of Lee Martin. Unfortunately for main title rival Jonathan Skidmore, trouble in the Semi Final put an end to his challenge for win number three of the season. Winner of Round 2 & 3 of the championship, the Xray driver finished as championship runner 8 points off Boots with brother William 3rd in the final standings.

Image: Elliott Boots [Facebook]

August 21, 2023

Amped Up RC 2s Balance Charge Leads

Following Donathen RC’s launch of its Amped Up RC range of off the shelve cables, they have released the first 3 products, 2s Balance Charge Leads. These leads are designed by DRC using DRC proportions, DRC connectors, 10 awg wire, and adhesive heat shrink. Each lead is fully protected with black sheathing covering all wires, increasing the protection, and lifespan of the lead. This sheathing can easily slide around with regular heat shrink, that is why we offer these leads with dual wall adhesive heat shrink. Not only does the adhesive heat shrink keep the sheathing in place, it adds durability, sturdiness, and molds to the connection providing the best protection available. To start, Amped Up RC is offering 3 balance leads, 5mm bullet connectors, Xt90 connectors, and Qs8 connectors 24″ long made with 10 awg wire. A unique feature of these leads is that they can be used with any charger that uses a JST-Xh balance housing.

View more images here

August 21, 2023

SuperRad SR-07L 1:12 LMP body

SuperRad Competition Bodyshells has added a new 1:12 LMP body to its range, the SR-07L LMP. The US body shell produce ground-up designed it specifically for high-bite, 17.5 stock class racing. It features a smooth aerodynamic design with a reduced spoiler for maximum efficiency. Available in XtraSuperLite .010”, SuperLite .015” and Lite .020” polycarbonate, it includes headlight decal sheet and window mask and is both ROAR and IFMAR approved.

View more images here

August 20, 2023

Ruddog supports Red RC 1:10 Offroad Worlds coverage

In just three weeks time the first wheels will be turning at the 2023 IFMAR 1:10 Offroad World Championships and Red RC is excited to announce we have teamed up with Ruddog Racing to bring our readers full trackside coverage from Arizona. Having been at Yatabe Arena in Japan in 2015 to witness both Spencer Rivkin and Bruno Coelho claim their first World Championship titles, we are super excited to be travelling to Hobby Action RC Raceway to see if either driver can defend their title and become 3-time Champions. After waiting an extra year for the 19th running of the race that decides the greatest prize any driver will achieve, the anticipation of the battles between the best racers in the World and the unearthing of the sport’s next generation of racing talents is higher than ever. The first of four World Championships Red RC will attend this year our coverage from Arizona is being supported by Ruddog. Founded in 2006 by Sven Rudig, himself an avid offroad racer, Ruddog is steeped in offroad racing history being a distributor for 31 times World Champion manufacturer Team Associated and iconic offroad tyre brand JConcepts to name but a few. In addition, they have developed their own product ranges such as Ruddog Racing, a new line of electronics offered by the German company that already has a European Championship title to its credit in touring car. Revolution Design Racing Products has established itself as a designer & producer of high-quality tuning parts and are popular upgrades among offroad racers. Red RC’s trackside coverage of the 1:10 Offroad World Championship will kick off on September 10th with the start of the 4WD action and conclude on September 16th when 2WD Champion is decided.

View World Championship schedule here