Red RC

May 5, 2016

McKune XB2, XB4’16 & TLR 22 FR4 high-bite slipper pads

McKune XB2, XB4'16 & TLR 22 FR4 high-bite slipper pads

Coming from McKune Design are new FR4 high-bite slipper pads for the Xray XB2, XB4’16 as well as TLR 22-series vehicles. Made from FR4 epoxy fibreglass laminate and offering a vented design the slipper pads are specially developed for all high-bite carpet, astroturf and clay tracks as they show now fading or glazing for a consistent feel throughout the run. The Xray set is a 3-piece package while the TLR 22 specific set, for the 22 3.0, 22 SCT 2.0 or 22-4, includes two pads.

Source: McKune Design [mckunedesign.com]

May 5, 2016

Nicolas Bregante takes South American title

The 2016 South American Championship and FAMAR Cup was recently held in the city of Medellin, Colombia. With the track being located 3000 metres above sea level everyone had a hard time adjusting the engines to the conditions. The opening qualifier was held on Thursday with Q2 and Q3 being run on Friday but due to rain the final qualifier had to be postponed until Saturday. Nicolas Bregante would come out fastest in the 1/8th Nitro Buggy qualifiers to grab the overall TQ and he would also take the pole position for the hour long A-main after winning his semifinal in very muddy conditions due to a big storm. Nicolas continued to dominate the race by also coming out fastest in the A-main to take the South American Championship title from runner-up, Carlos Segui.

View the final result here

May 4, 2016

Daniele Ielasi & Tobias Kerler Energy fuelled for 2016

Former World Champion, Daniele Ielasi and Germany’s Tobias Kerler will use Energy Fuel to power their rides for their 2016 campaigns. Developed by Pepe Group, the company behind the popular MLC fuel, Daniele and Tobias were very happy with the performance of the juice during their tests and they are now looking forward to a successful season.

Source: Scuderia Fun & Drive [facebook.com]

May 4, 2016

Michael Schäfer takes 200mm class win at SRC

Michael Schäfer take 200mm class win at SRC

The first round of the Swiss Racing Cup was recently held at the iconic Lostallo track. Xray’s Michael Schäfer took the TQ after the qualifiers from Xray team mate Patrick Fankhauser in second. The main final then was a pretty difficult affair as it started to rain some eight minutes into the race but it only was a short shower of a couple of minutes and so the track started to dry soon after. At the end Michael was able to bring home the win in front of Stefan Wüthrich (Xray) and Philipp Bühler (Xray), making it an Xray podium lock-out.

View the top 10 result here

May 4, 2016

Niblett, Hazlewood & Currie win at SRS Rd2

The second round of the SRS 2016 series was held on a glorious day at Herts over the weekend. Warm and sunny weather and a recently revamped track brought the drivers out in their droves for this round and they would not be disappointed, with excellent track conditions and great weather. The main Nitro buggy class was, as is always the case at Herts, a very closely fought competition and it was a bunch of juniors who dominated the qualifying sessions with Callum Niblett coming out on top, with Ollie Currie second and Jonny Skidmore third. The times were ever so close however, as Callum took round two by only 2/10’s of a second from Jonny would prove. Tony Truman was having a low key day, but he was still in the main final and would be a threat come final time.

Continue reading the report here

May 4, 2016

Sonic SB.21-5T buggy engine

Sonicbuggy-1

Sonic Nitro Engines have introduced their new competition buggy engine called the SB.21-5T. All components have been made from the finest materials to ensure high durability and reliability. Equipped with a 5 port sleeve and a CNC machined flat piston, the engine provides great power over the entire RPM range while having a very efficient fuel consumption which is crucial in the finals. The 14mm turbo crankshaft is equipped with two high density weights to improve the overall balance and filled with a silicone insert to reduce the inertia and improve the fuel flow. The special back plate, the optimized crankcase and the “knife edged” aerodynamic conrod help to further reduce turbulence inside the engine. A special lightweight cooling head ensures excellent heat dispersion to keep the engine temperature at a good level. High quality Swiss ball bearings, a dust protected front bearing, a modern composite valve carburettor and venturis in 6.5mm, 7.0mm and 8.0mm made of aluminium complete this new high competition engine.

View more details & images here

May 4, 2016

Belgian SCT Cup Rd1 – Report

The season opening round of the Belgian SCT Cup was held at the RC@CZ club whose track is located within the full scale Zolder Circuit. A big track surrounded by pine trees the facility made for a perfect place to start the new season that also attracted a record entry of drivers. In the Pro2 class, Samuel Castel (TLR) took the opening qualifier with Géry Ledocq (Kyosho) coming out fastest in the second round while Nicolas Evens (TLR) TQ’d the third and final qualifier. Overall the pole position for the finals would be taken by Nicolas with Géry and Samuel lining up in second and third. The three drivers had quite a similar pace with Tom Pierard (TLR), Laurent Halluin (TeamC) and Philippe Hautecoeur (Team Associated) battling for the 4th spot.

Continue reading the report here

May 4, 2016

Exotek XB2 CE alloy rear camber mount & rear hubs

New from Exotek come two aluminium option parts for the Xray XB2 series of 2WD buggies. First up is the rear alloy camber mount for the Carpet Edition kit. The part is machined from 7075 aluminium and special countersunk mounting holes insure that the camber angle does not change in hard tumbles. It also helps keep camber plate alignment the same in case the plate is taken off for cleaning or maintenance purposes. A direct fit on the buggy the camber mount is available in orange or black colour. Also new and made for all XB2 series buggies are heavy duty 7075 aluminium rear hubs. Extra durable for high-power applications the parts are polished, anodised in orange or black and they are machined a second time to insure precise bearing fit. The hubs are rounded out by set screw holes for optional M3 grub screws.

View more images here