Red RC

February 14, 2016

STRC 17mm aluminium wheel nut wrench

Coming from ST Racing Concepts is a 17mm aluminium wheel nut wrench. The wheel nut wrench is machined from high-quality aluminium in a two-piece construction. The lightweight slotted shank component of the wrench keys into the drilled light weight wrench handle and it is secured in place by four steel screws. The wrench is also long enough to provide good clearance for the hand when used on wheels with deeper off-sets. The tool is available in two-tone anodising of a black handle combined with blue, gun metal, red, or silver bodies.

View more images here

February 12, 2016

JConcepts Triple Dees 1/8th buggy tyres

Coming from JConcepts are the Triple Dees 1/8th buggy tyres. The tyres sport a tread design that was developed for loose and tacky track conditions. Starting with finely spaced square mini lugs the tyre also features an overlapping and blended centre bar structure. The bar draws up the side of the pin to maintain all important support but the main stance is low so the tyre maintains its clean-out ability during acceleration. The main-stay of the tyre is the angled and sharp pins which spread across the carcass in an open pattern touching off the track surface. Near the side-wall the pins have been trimmed and angled to give racers a smooth driving experience as they enter and exit tacky turns or slightly rough terrain. The inside of the carcass includes a standardised triple radial rib design which helps control expansion during high-speed runs. The Triple Dees is available in grippy compounds such has blue, green and black and it comes including Dirt-Tech inserts and also as pre-mounts on white or yellow wheels.

Source: JConcepts [jconcepts.net]

February 12, 2016

Xray XB4 medium compound chassis side guards

Xray have introduced optional medium compound chassis side guards for the XB4 buggy. Softer than the kit side guards, they are a tuning aid for chassis flex adjustment. The medium-hardness side guards increase the torsional flex, leading to a softer overall chassis assembly and they are therefore recommended especially for low-traction tracks.

Source: Xray [teamxray.com]

February 12, 2016

Xray XB2 Dirt Edition 1/10th 2WD buggy kit

Following the XB2 Carpet Edition 1/10th 2WD buggy kit that was introduced back in November, Xray now also release all information on the forthcoming Dirt Edition kit. The buggy was designed for very-low to medium-high traction conditions and it comes with a 3-gear gearbox with high layshaft design, moving the motor much closer to the differential than the Carpet Edition gearbox. This makes for improved rear traction in low-grip conditions which is further helped by the inclusion of a ball differential instead of a gear diff as in the Carpet kit. Other Dirt-specific features include medium composite suspension parts, composite front and rear shock towers as well as a specially designed motor upper brace and battery strap. The kit will hit the stores world-wide very soon.

View the features and more images here

February 12, 2016

Clark wins at Eastern States Indoor On-Road Champs

The 2016 Eastern States Indoor On-Road Championship was recently held at RC Car World in Willingboro, New Jersey, attracting over 90 entries. Races were held for a variety of classes including Vintage, 17.5 Touring, USGT, F1 Rubber, F1 Foam, Mini, and 1/12, with 17.5 Touring being the most popular. The story of the weekend was the dominant performance of Patrick Clark (Team Associated) in this respective class. With a first round TQ run of 35 6:00 five racers were within a few seconds of the TQ lap pace. In round two several drivers began to close the gap and apply pressure on Pat. Come round 3 and Pat erased all doubt of who would end the day holding TQ, with his most dominate run of the event of a 37 6:09. Patrick was the only driver of the event to break into the 37 lap mark. With his strangle hold on TQ attention shifted to the remaining nine spots in the A-main. When the dust had settled only eight seconds separated the remaining top 8 drivers. The grid was for an exciting A-main and as expected, Pat’s dominance continued as he took a tone to tone victory from Quin Moon (VBC) in second and Courtney Townend (Xray) in third.

View the A-main result here

February 12, 2016

SA 1/8th GT Cup Endurance Series – Announcement

South Africa will soon host their first 1/8 GT Cup Endurance event as part of a new annual series, after recently including the growing 1/8 GT discipline to its National calendar. The first event is a 3-hour endurance race between teams of three to four drivers and it will take place on the 20th of February at the TRAP RC Venue in Pretoria. The race has already received over 10 teams onto its entry list and more information about the event and the series can be found here.

February 12, 2016

Xray T4 adjustable hard carbon fibre top deck

Coming soon from Avid and made for the Xray T4’16 is the adjustable 2.0mm hard carbon fibre top deck. The first of its kind, it allows to adjust the twisting stiffness in the front, simulating a 0.5mm soft top deck all the way to a 2.2mm hard top deck by simply sliding a clamp back and forth in the front. The rear section of the TD also allows a clamp adjustment which is only capable of stiffen the rear for advanced setup gurus. Five small position holes have been added on each rail to help with precise adjustment changing and monitoring and the deck is cut from 100 percent premium carbon fibre with layup angles balanced left and right to insure equal twisting resistance side to side. The top deck is recommended for use on all conditions, it fits the T4’16, ’15 and ’14 and it includes the upper deck, clamp, and an Avid mini decal.

The adjustment is explained here

February 12, 2016

Evo Zirkon Power 5000mAh LiPo battery pack

New US company Evo have introduced their Zirkon Power 5000mAh LiPo battery pack. Built from lightweight yet powerful 40C cells the battery weighs in at only 230g, making it ideal for everyone who wishes to achieve a low overall vehicle weight without compromising runtime. The hardcase pack is of standard dimensions and it utilises 4mm connector tubes as well as a 2mm balancer port.

Source: Evo [evotechrc.com]