Red RC

October 15, 2015

Absima 1/8th buggy wheel sets

German company Absima have new wheel sets for 1/8th buggies available. First up is a tyre called Dirt that features a massive multi-surface tread to tackle a wide range of track conditions and surfaces such as asphalt, dirt, grass and more. The tyre sports a 117mm diameter and a width of 40mm and it comes pre-glued on black disc rims compatible for virtually all 1/8th buggies out there. Also new are two sand paddle tread tyres of different shape. The larger tread comes pre-glued on black rims while the finer tread is mounted to while 5-spoke wheels. The tyres are ideal for bashing in the snow and sand.

View the other new tyres here

October 15, 2015

HPI Baja 5B Flux Ultimate Power Pack set

Coming from HPI Racing and made for the Baja 5B Flux large scale buggy is the Ultimate Power Pack set. Included are two softcase 14.8V 5300mAh 60C LiPo battery packs that snuggly fit into the buggy’s tough plastic battery box. The packs come pre-wired with T-type connectors and also included is a suitable jumper wire. Despite fitting into other vehicles HPI strongly recommend to use the batteries only in cars with battery boxes to not leave them unprotected from the elements.

Source: HPI Racing [hpiracing.com]

October 15, 2015

VBC Racing LightningF alloy steering knuckles

VBC Racing have released a set of optional aluminium steering knuckles for the LightiningF and FX formula cars. Machined from high-quality 7075 material and coming gun metal anodised the parts provide smoother kingpin travel, and they improve rigidity and durability of the front end. The knuckles must be used in conjunction with the company’s new hardened steel front axles but apart from that they are a drop fit for the F and FX kits.

View the front wheel axles here

October 14, 2015

Brilliant RC synthetic felt pit mat

From Brilliant RC comes a unique pit mat made from a highly compressed synthetic felt. Making it very impact and temperature resistant the mat brings a new clean look into the pits thanks to the matt black colour on which dirt is less visible than on bright coloured pit mats, resulting in a clean look of the table. Furthermore the surface prevents small parts like screws, pins, balls etc. from rolling away. With a size of 50x98cm the mat fits perfectly into a standard pit area while the soft material allows to roll the mat for easy storage and transportation.

View more photos here

October 14, 2015

JConcepts B5M honeycomb aluminium chassis

Seen for the first time at last week’s IFMAR 1/10th Off-road World Championships JConcepts have now officially introduced the honeycomb lightweight aluminium chassis for the Team Associated B5M. Machined from hard anodised black aluminium and sporting milled hex shaped pockets the chassis also features aluminium islands in the electrics compartment which are left to allow an electrical footing area for mounting and wiring needs. The hex pockets in the centre of the chassis have been cleared for sensor wire or miscellaneous wire routing. All edges of the honeycomb pockets have been highlighted with chamfered edging all around, bringing out an luxurious look. The honeycomb chassis weighs in at 112 grams, some 23 grams less than a stock counterpart all while still remaining structurally sound, making it deal for stock and modified racers alike.

content

October 14, 2015

Pro-Line hard 1/10th buggy rear foams

Available soon from Pro-Line are hard rear foams for 2.2″ 1/10th buggy tyres. Used by Ty Tessmann to TQ and win at the 2015 Pro-Line Cactus Classic the hard foams are of a solid closed cell design with no internal grooves for maximum hardness and durability. They offer maximum support for the tyres, are ideally used on high-bite surfaces and come in pairs.

Source: Pro-Line [prolineracing.com]

October 14, 2015

Radtec T4 aluminium differential outdrives

Coming from Radtec and made for the Xray T4 line of touring cars are aluminium differential outdrives. Machined from high-quality 7075 material and finished with a hard-coated surface the cups reduce the drivetrain’s rotating mass for improved acceleration and braking while offering low wear characteristics at the same time.

Source: Radtec [radtec-rc.com]

October 14, 2015

2015 JConcepts Fall Indoor Nationals – Report

The 2015 JConcepts Indoor National Series made its way to the popular RC Excitement in Fitchburg, Massachusetts. Just outside of Boston, with the fall weather beginning to slowly creep in to cooler temperatures in the mornings, and the leaves beginning to change into the bright fall colors that are well known for the region. Inside the facility however, the racing was hot on the fast flowing layout. This year’s circuit had a good flow and feel, with elevation and enough jumps to keep even the experienced drivers on their toes. Todd Anderson and his staff had the track, pit area and shop ready for the weekend full of visitors.

Continue reading the report here