Red RC

June 26, 2015

Nitro-West-Masters Rd2 – Report

Round two of the 6-event Nitro-West-Masters 2015 was recently held in Haltern. It was the third race meeting on the 234 meter track since its comeback in 2012 following a break of a couple of years. The track, located on the site of a driving training centre, is well-known for the nice atmosphere in the paddock with lots of tents and for its small but high rostrum. A total of 51 drivers attended the race that held some extremely close decisions in three of four classes. In the 1/8th Open class Serpent racer Ralf Vahrenkamp took the TQ ahead of Uwe Baldes (Mugen) and Andreas Goebel in his first race with ARC. In the 39 minutes finale Baldes was able to move into the front spot but while leading his Mugen suffered a gearbox issue which forced the reigning champion to retire. So it was Vahrenkamp who was back in the lead again and who brought home the victory after 120 laps. Only eight seconds behind old-boy Reinhard Zick (Mugen) crossed the finish line. Much closer was the battle for the third spot on the podium which went to Matthias Guenther (Shepherd) who completed 117 laps only 7/10th of a second ahead of Martin Figge (Motonica). Also Thomas Kroeger (Serpent) did 117 laps but he ended the race another two and a half seconds down on Figge.

Click here to continue reading the report

June 26, 2015

Pro-Line Jeep Comanche full bed rock crawler body

Pro-Line have introduced the Jeep Comanche full bed 12.3″ rock crawler body for 1/10th scale and crawler rigs with 12.3″ wheelbase. This body is constructed out of a single piece of high-quality Lexan, doing away with the need of handling multiple body pieces. Included comes a comprehensive decal sheet containing grille and light details among others.

Click here to view more photos

June 26, 2015

Prumper tops practice at ETS finale

fri_prumper-620x372

Yannic Prumper topped practice at the Yokomo Euro Touring Series season finale at the Hudy Racing Arena in Slovakia. The Yokomo driver was fastest over 3-consecutive laps from team-mate Ronald Volker. The only driver in with a chance of denying Volker & Yokomo their fifth consecutive ETS title, Marc Rheinard completed the Top 3 just ahead of former team-mate Viktor Wilck, the pair having claimed a TRF 1-2 at the event last year.

Continue reading this report here or our full event coverage here.

June 26, 2015

Bittydesign Zefirus 1/8th off-road Lexan wing

Designed in cooperation with Italian and UK top drivers is Bittydesign’s new Zefirus Lexan rear wing for 1/8th off-road buggies and trucks. Light of weight thanks to its design and the polycarbonate material used, the wing helps to lower the car’s centre of gravity without compromising aerodynamics. The design of the wing allows to fine-tune the downforce created by adding or modifying the included gurney flap and by using or leaving away the optional side dams. By opening airflow vents the wing is further tuneable and in its lightest configuration 50 percent lighter than a standard plastic wing. Made in Italy and coming made from clear and high-quality Lexan material the wing set includes the gurney flap, side dams, mounting hardware, and a decal sheet. Furthermore the wing is also available pre-painted in black, white and fluorescent yellow.

Click here to view more photos

June 26, 2015

Tesla low-profile fuel filter

Coming from Capricorn and made for most 1/8th and 1/10th nitro applications is a low-profile fuel filter. The filter’s body is of a 2-piece design that allows to easily clean the inner micro mesh element from any dust and dirt. The filter is made from aluminium with one side coming anodised in Tesla’s signature blue colour with a laser etched logo.

Click here to view another photo

June 26, 2015

Team C brushless motor bearing tool

Team C have introduced a bearing tool for electric brushless motors. It is designed to help removing and installing the ball race that is pressed into the motor can without harming the bearing or the can. The tool is made from aluminium, it is of a lightweight design and comes orange anodised for looks and durability.

Click here to view more photos

June 26, 2015

MD Racing MDF14 new carbon parts & alloy rear axle

MD Racing have new option parts for the MDF14 formula car available in the form of an updated carbon fibre chassis and suspension parts as well as an aluminium rear axle set. Starting with the carbon fibre parts, they are of a new design for added torsional stiffness and a better stiffness/weight ratio. Available are new front lower A-arms, battery plate, rear brace, upper power pod, and rear wing plate, as well as the main chassis and the lower power pod plate.

Click here to continue reading

June 26, 2015

T-Works Tweak Terminator tool

T-Works have introduced the Tweak Terminator tool for 1/10th electric touring cars. Making use of a common design with a sturdy glass plate and a carbon fibre rod the system helps to eliminate any tweak from the car’s chassis by loosening the top deck screws, placing the chassis on the glass plate and pressing the chassis down with the carbon fibre rod which is placed on the shock towers. Then all screws are fastened again and the result is a straight and tweak-less chassis. The tool comes in a handy, padded bag for easy storage and transportation and the rods are available with red, orange or blue anodised alloy plugs.

Click here to view more photos